journal article·2021-09Open access

Quantifying the chemical, electrochemical heterogeneity and spatial distribution of (poly) sulfide species using Operando SANS

Charl J. Jafta, Sylvain Prévost, Lilin He, Mengya Li, Xiao-Guang Sun, Guang Yang, Ilias Belharouak, Jagjit Nanda

Abstract

In-situ and operando measurements are done to gain a better understanding of the precipitation mechanisms during charge and discharge in lithium sulfur batteries. A carbon felt networked with microfibers consisting of pores, 2 nm and smaller, is used as a freestanding sulfur host. Three different methods of sulfur infiltration are explored in order to determine the best one to fill most of the pores. It was identified to be a melt infiltration method in a vacuum oven, where the pores including the ultra-micropores, are successfully filled. In-situ electrochemical impedance spectroscopy measurements show a solid product formation occurring at the sulfur cathode, both during the high voltage plateau and at the end of discharge. In a 3-electrode EIS measurement, a similar solid product formation on the Li counter electrode due to its reaction with polysulfides is also observed. Operando small angle neutron scattering measurements show the solid product formation, in the carbon, both near the beginning and at the end of discharge, confirming the precipitation data via contrast changes as a function of charge and discharge. It is shown that Li2S precipitates in the pores at the beginning and the end of discharge, whereas S8 precipitates on the surface of the carbon felt. This lithium sulfur system shows both the quasi-solid-state and the solid-liquid-solid reactions in a typical ethereal electrolyte solution with a two-plateau discharge profile.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Electrical energy storage for transportation—approaching the limits of, and going beyond, lithium-ion batteries10.1039/c2ee21892e ↗
2. Sulphur back in vogue for batteries10.1038/498416a ↗
3. New approaches for high energy density lithium-sulfur battery cathodes10.1021/ar3001348 ↗
4. Birk · 1975 · 186
5. Electrochemistry of a nonaqueous lithium/sulfur cell10.1016/0378-7753(83)87029-3 ↗
6. The electrochemical behavior of polysulfides in tetrahydrofuran10.1016/0378-7753(85)88022-8 ↗
7. Lithium-sulfur battery: evaluation of dioxolane-based electrolytes10.1149/1.2096981 ↗
8. Herbert · 1962
9. A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries10.1038/nmat2460 ↗
10. Highly dispersed sulfur in a porous aromatic framework as a cathode for lithium-sulfur batteries10.1039/c3cc41518j ↗
11. Lithium-sulfur batteries based on nitrogen-doped carbon and an ionic-liquid electrolyte10.1002/cssc.201200101 ↗
12. Confined Sulfur in microporous carbon renders superior cycling stability in Li/S Batteries10.1002/adfm.201500983 ↗
13. Rechargeable lithium sulfur battery
14. Sulfur vapor-infiltrated 3D carbon nanotube foam for binder-free high areal capacity lithium-sulfur battery composite cathodes10.1021/acsnano.7b01437 ↗
15. Smaller sulfur molecules promise better lithium-sulfur batteries10.1021/ja308170k ↗
16. Lithium sulfur batteries, a mechanistic review10.1039/C5EE01388G ↗
17. Ab initio structure search and in situ 7Li NMR studies of discharge products in the Li-S battery system10.1021/ja508982p ↗
18. Operando analysis of a lithium/sulfur battery by small-angle neutron scattering10.1021/acsnano.9b03453 ↗
19. Mechanism and kinetics of Li2S precipitation in lithium-sulfur batteries10.1002/adma.201501559 ↗
20. Insight into sulfur confined in ultramicroporous carbon10.1021/acsomega.8b01681 ↗
21. Review—on the mechanism of quasi-solid-state lithiation of sulfur encapsulated in microporous carbons: is the existence of small sulfur molecules necessary?10.1149/2.0391701jes ↗
22. A microporous-mesoporous carbon with graphitic structure for a high-rate stable sulfur cathode in carbonate solvent-based Li-S batteries10.1039/c2cp40808b ↗
23. Cathode-supported all-solid-state lithium–sulfur batteries with high cell-level energy density10.1021/acsenergylett.9b00430 ↗
24. New insight into the working mechanism of lithium-sulfur batteries: in situ and operando X-ray diffraction characterization10.1039/c3cc43766c ↗
25. Mechanistic insights into operational lithium–sulfur batteries by in situ X-ray diffraction and absorption spectroscopy10.1039/c4ra01388c ↗
26. Identification of lithium–sulfur battery discharge products through 6Li and 33S solid-state MAS and 7Li solution NMR spectroscopy10.1016/j.susc.2014.07.027 ↗
27. In situ/operando characterization techniques for rechargeable lithium-sulfur batteries: a review10.1039/C7NR06819K ↗
28. Recent in situ/operando characterization of lithium-sulfur batteries
29. Distribution of sulfur in carbon/sulfur nanocomposites analyzed by small-angle X-ray scattering10.1021/acs.langmuir.5b04734 ↗
30. Correlating pore size and shape to local disorder in microporous carbon: A combined small angle neutron and X-ray scattering study10.1016/j.carbon.2017.07.046 ↗
31. Probing microstructure and electrolyte concentration dependent cell chemistry via operando small angle neutron scattering10.1039/C8EE02703J ↗
32. Sulfur-impregnated activated carbon fiber cloth as a binder-free cathode for rechargeable Li-S batteries10.1002/adma.201103274 ↗
33. Freestanding carbon fiber cloth/sulfur composites for flexible room-temperature sodium-sulfur batteries10.1016/j.ensm.2017.05.001 ↗
34. A lithium-sulfur cathode with high sulfur loading and high capacity per area: a binder-free carbon fiber cloth-sulfur material10.1039/C4CC03410D ↗
35. Characterization of micro- and mesoporous solids by physisorption methods and pore-size analysis10.1016/S0926-860X(98)00164-1 ↗
36. Quenched solid density functional theory and pore size analysis of micro-mesoporous carbons10.1016/j.carbon.2009.01.050 ↗
37. Is the BET equation applicable to microporous adsorbents
38. Pore hierarchy in mesoporous silicas evidenced by in-situ SANS during nitrogen physisorption10.1021/la063715+ ↗
39. Analysis of microporosity in ordered mesoporous hierarchically structured silica by combining physisorption with in situ small-angle scattering (SAXS and SANS)10.1021/la9013619 ↗
40. Interpretation of small-angle scattering curves proportional to a negative power of the scattering vector10.1107/S002188988201259X ↗
41. Investigation of morphology and hydrogen adsorption capacity of disordered carbons10.1016/j.carbon.2014.08.041 ↗
42. Four-electrode symmetric setup for electrochemical impedance spectroscopy study of Lithium–Sulfur batteries
43. Advanced model for solid electrolyte interphase electrodes in liquid and polymer electrolytes10.1149/1.1837858 ↗
44. Investigations of lithium–sulfur batteries using electrochemical impedance spectroscopy10.1016/j.electacta.2013.02.101 ↗
45. New insight into the discharge process of sulfur cathode by electrochemical impedance spectroscopy10.1016/j.jpowsour.2008.10.033 ↗
46. A multidimensional operando study showing the importance of the electrode macrostructure in lithium sulfur batteries10.1021/acsaem.0c01027 ↗
47. Impedance response of porous carbon cathodes in polysulfide redox system10.1016/j.electacta.2019.02.037 ↗
48. Ion dynamics in ionic-liquid-based li-ion electrolytes investigated by neutron scattering and dielectric spectroscopy10.1002/cssc.201801321 ↗
49. Binary electrolyte based on tetra(ethylene glycol) dimethyl ether and 1,3-dioxolane for lithium–sulfur battery10.1016/S0378-7753(02)00418-4 ↗
50. Modeling the voltage loss mechanisms in lithium-sulfur cells: the importance of electrolyte resistance and precipitation kinetics10.1039/C5CP03566J ↗
51. A mathematical model for a lithium–sulfur cell10.1149/1.2937304 ↗
52. Analysis of a mathematical model of lithium-sulfur cells Part III: electrochemical reaction kinetics, transport properties and charging10.1016/j.electacta.2014.06.033 ↗
53. Lithium/Sulfur batteries upon cycling: structural modifications and species quantification by in situ and operando X-ray diffraction spectroscopy10.1002/aenm.201500165 ↗
54. Simple cathode design for Li-S batteries: cell performance and mechanistic insights by in operando X-ray diffraction10.1039/C4CP02220C ↗
55. Ionic liquid-derived nitrogen-enriched carbon/sulfur composite cathodes with hierarchical microstructure—a step toward durable high-energy and high-performance lithium–sulfur batteries10.1021/cm504460p ↗
56. In-situ X-ray diffraction studies of lithium–sulfur batteries10.1016/j.jpowsour.2012.10.092 ↗
57. Sulfur Speciation in Li–S batteries determined by operando X-ray absorption spectroscopy10.1021/jz401763d ↗
58. Electrochemical impedance spectroscopy study of a lithium/sulfur battery: modeling and analysis of capacity fading10.1149/2.026304jes ↗
59. Severe loss of confined sulfur in nanoporous carbon for Li–S batteries under wetting conditions10.1021/acsenergylett.7b01238 ↗
60. Lithium-sulfur batteries: attaining the critical metrics10.1016/j.joule.2020.01.001 ↗
61. Probing the Li4Ti5O12 interface upon Lithium uptake by operando small angle neutron scattering10.1002/cssc.202000802 ↗
62. Unraveling the operation mechanisms of lithium sulfur batteries with ultramicroporous carbons10.1021/acsaem.8b01159 ↗
63. Multidimensional operando analysis of macroscopic structure evolution in lithium sulfur cells by X-ray radiography10.1039/C6CP01020B ↗
64. Binder-free carbon monolith cathode material for operando investigation of high performance lithium-sulfur batteries with X-ray radiography10.1016/j.ensm.2017.06.008 ↗