Tri-sites co-doping: An efficient strategy towards the realization of 4.6V-LiCoO2 with cyclic stability
Source abstract
Abstract
Lithium cobalt oxide (LCO) is extremely attractive for the volumetric and gravimetric energy density at high cut-off voltage, but the degradation issues we are always grappling with becomes much tougher. Here, an unconventional strategy of multi-sites co-doping is proposed using cheap and abundant elements like Na, Si, Al, Fe and F. By summarizing the fading behaviors of all the samples, the capacity fading shows a linear correlation with the doping elements . The optimized co-doping strategy enables each doping elements to achieve the full potential in the promotion of cyclic stability. The resultant LCO maintains a capacity retention of 81.8% after 500 cycles at 4.6 V of the full battery . Further evidences signify that the capacity fading in the early stage is mainly caused by surficial side reactions and the accompanying structural damage, while the fading in the later stage is due to particle cracking generated by the repeated planar gliding and the anabatic side reaction of the newly exposed surface. Therefore, not only the main factor of structural damage caused by surface side reactions should be considered, but more attention need to be paid on the planar gliding when designing more stable LCO. The tri-sites co-doping strategy, which can better integrate the inhibitory effect of different doping sites on planar gliding, provides a new idea for further improving the cyclic stability of high-voltage LCO.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. LixCoO2 (0 < x < 1): a new cathode material for batteries of high energy density10.1016/0025-5408(80)90012-4 ↗
2. Narrowing the gap between theoretical and practical capacities in Li-ion layered oxide cathode materials10.1002/aenm.201602888 ↗
3. Unveiling nickel chemistry in stabilizing high-voltage cobalt-rich cathodes for lithium-ion batteries10.1002/adfm.201907903 ↗
4. Surface engineering strategies of layered LiCoO2 cathode material to realize high-energy and high-voltage Li-ion cells10.1002/aenm.201601507 ↗
5. Reversible planar gliding and microcracking in a single-crystalline Ni-rich cathode10.1126/science.abc3167 ↗
6. Hierarchical defect engineering for LiCoO2 through low-solubility trace element doping10.1016/j.chempr.2020.07.017 ↗
7. Factors that affect Li mobility in layered lithium transition metal oxides10.1103/PhysRevB.74.094105 ↗
8. In operando EPR investigation of redox mechanisms in LiCoO210.1016/j.cplett.2018.12.022 ↗
9. Oxygen contribution on Li-ion intercalation-deintercalation in LiCoO2 investigated by O K-edge and Co L-edge X-ray absorption spectroscopy10.1021/jp013735e ↗
10. Time-of-flight secondary ion mass spectrometry study of lithium intercalation process in LiCoO2 thin film10.1016/j.jpowsour.2016.04.084 ↗
11. In situ visualization of state-of-charge heterogeneity within a LiCoO2 particle that evolves upon cycling at different rates10.1021/acsenergylett.7b00263 ↗
12. Microscopy study of structural evolution in epitaxial LiCoO2 positive electrode films during electrochemical cycling10.1021/acsami.5b12025 ↗
13. Structural distortion-induced charge gradient distribution of Co ions in delithiated LiCoO2 cathode10.1021/acs.jpclett.9b02711 ↗
14. Electrochemically driven phase transition in LiCoO2 cathode10.3390/ma14020242 ↗
15. Stabilizing layered structure in aqueous electrolyte via dynamic water intercalation/deintercalation10.1002/adma.202108541 ↗
16. 3D LiCoO2 nanosheets assembled nanorod arrays via confined dissolution recrystallization for advanced aqueous lithium-ion batteries10.1016/j.nanoen.2018.11.085 ↗
17. Dynamic evolution of cathode electrolyte interphase (CEI) on high voltage LiCoO2 cathode and its interaction with Li anode10.1016/j.ensm.2018.02.016 ↗
18. Measuring Li+ inventory losses in LiCoO2/graphite cells using Raman microscopy10.1149/2.1111606jes ↗
19. Origins of capacity and voltage fading of LiCoO2 upon high voltage cycling10.1039/C9TA06579B ↗
20. Al2O3-surface modification of LiCoO2 cathode with improved cyclic performance10.1016/j.jelechem.2017.04.026 ↗
21. Stable, fast and high-energy-density LiCoO2 cathode at high operation voltage enabled by glassy B2O3 modification10.1016/j.jpowsour.2017.06.050 ↗
22. Sputtering TiO2 on LiCoO2 composite electrodes as a simple and effective coating to enhance high-voltage cathode performance10.1016/j.jpowsour.2017.02.035 ↗
23. Oxygen framework reconstruction by LiAlH4 treatment enabling stable cycling of high-voltage LiCoO210.1016/j.ensm.2021.10.041 ↗
24. Investigation of the LiBH4 modification effect on cycling stability and high-rate capacity of LiCoO2 cathodes10.1021/acsaem.1c01035 ↗
25. Improving thermal and electrochemical performances of LiCoO2 cathode at high cut-off charge potentials by MF3 (M=Ce, Al) coating10.1016/j.materresbull.2015.09.020 ↗
26. Enhanced eletrochemical performances of LiCoO2 at high cut-off voltage by introducing LiF additive10.1016/j.ssi.2021.115654 ↗
27. In situ electrochemical surface modification for high-voltage LiCoO2 in lithium ion batteries10.1016/j.jpowsour.2019.04.011 ↗
28. Enhanced interfacial kinetics and high-voltage/high-rate performance of LiCoO2 cathode by controlled sputter-coating with a nanoscale Li4Ti5O12 ionic conductor10.1021/acsami.6b11630 ↗
29. Unraveling the multiple effects of Li2ZrO3 coating on the structural and electrochemical performances of LiCoO2 as high-voltage cathode materials10.1016/j.electacta.2016.05.066 ↗
30. Gradient-morph LiCoO2 single crystals with stabilized energy density above 3400W h L−110.1039/D0EE00231C ↗
31. Electrochemical surface passivation of LiCoO2 particles at ultrahigh voltage and its applications in lithium-based batteries10.1038/s41467-018-07296-6 ↗
32. Improved high-voltage and high-temperature electrochemical performances of LiCoO2 cathode by electrode sputter-coating with Li3PO410.1016/j.jpowsour.2016.04.092 ↗
33. An in situ formed surface coating layer enabling LiCoO2 with stable 4.6V high-voltage cycle performances10.1002/aenm.202001413 ↗
34. Multi-scale stabilization of high-voltage LiCoO2 enabled by nanoscale solid electrolyte coating10.1016/j.ensm.2020.03.031 ↗
35. Tailoring Co3d and O2p band centers to inhibit oxygen escape for stable 4.6V LiCoO2 cathodes10.1002/ange.202112508 ↗
36. A novel bifunctional self-stabilized strategy enabling 4.6 V LiCoO2 with excellent long-term cyclability and high-rate capability
37. Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density10.1039/C8CS00322J ↗
38. Designing high-voltage and high-rate Li1-xNaxCoO2 by enlarging Li layer spacing10.1016/j.electacta.2018.04.043 ↗
39. Conflicting roles of Na-doped layered cathode material LiCoO2 for Li-ion batteries10.1007/s10008-021-05032-7 ↗
40. Revealing the correlation between structure evolution and electrochemical performance of high-voltage lithium cobalt oxide10.1016/j.jechem.2020.06.027 ↗
41. Study on the effect of Ni and Mn doping on the structural evolution of LiCoO2 under 4.6 V high-voltage cycling10.1016/j.jallcom.2020.155827 ↗
42. Synthesis of Mg and Mn Doped LiCoO2 and effects on high voltage cycling10.1149/2.1381707jes ↗
43. Trace doping of multiple elements enables stable battery cycling of LiCoO2 at 4.6 V10.1038/s41560-019-0409-z ↗
44. Mg-pillared LiCoO2: towards Stable Cycling at 4.6V10.1002/anie.202014226 ↗
45. Co/Li-dual-site doping towards LiCoO2 as a high-voltage, fast-charging, and long-cycling cathode material10.1039/D1TA10612K ↗
46. Surface design with cation and anion dual gradient stabilizes high-voltage LiCoO210.1002/aenm.202200813 ↗
47. Improved electrochemical performances of LiM0.05Co0.95O1.95F0.05 (M=Mg, Al, Zr) at high voltage10.1016/j.electacta.2012.02.057 ↗
48. Lattice modulation by Ca/P dual-doping for fast and stable Li+ intercalation/extraction in high-voltage LiCoO210.1021/acs.jpcc.0c10741 ↗
49. Synthesis and electrochemical performance of high voltage cycling LiM0.05Co0.95O2 as cathode material for lithium rechargeable cells10.1149/1.1738423 ↗
50. Lithium-Ion conductors of the system LiCo1−xFexO2: a first electrochemical investigation10.1016/S0013-4686(00)00683-6 ↗
51. An investigation of silicon-doped LiCoO2 as cathode in lithium-ion secondary batteries10.1016/j.ssi.2005.11.009 ↗
52. Advancing to 4.6V review and prospect in developing high-energy-density LiCoO2 cathode for lithium-ion batteries10.1002/smtd.202200148 ↗
53. Electronic structure of LiCoO2 surfaces and effect of Al substitution10.1021/acs.jpcc.8b11661 ↗
54. Surface chemistry, passivation, and electrode performance in core-shell architectures of LiCoO2 nanoplates10.1021/acsaem.8b02162 ↗
55. Interdiffusion of cations from metal oxide surface coatings into LiCoO2 during sintering10.1021/acs.chemmater.7b01219 ↗
56. XPS study on Al2O3- and AlPO4-coated LiCoO2 cathode material for high-capacity Li ion batteries10.1149/1.2789299 ↗
57. Improvement of float charge durability for LiCoO2 electrodes under high voltage and storage temperature by suppressing O1-phase transition10.1016/j.jpowsour.2020.228127 ↗
58. Effect of lithium-ion diffusibility on interfacial resistance of LiCoO2 thin film electrode modified with lithium tungsten oxides10.1016/j.jpowsour.2015.11.075 ↗
59. Tunable LiAlO2/Al2O3 coating through a wet-chemical method to improve cycle stability of nano-LiCoO210.1021/acsaem.8b02079 ↗
60. Investigation on the effect of Na doping on structure and Li-ion kinetics of layered LiNi0.6Co0.2Mn0.2O2 cathode material10.1016/j.electacta.2016.01.139 ↗