journal article·2022-01Open access

Methodologies for Design, Characterization and Testing of Electrolytes that Enable Extreme Fast Charging of Lithium-ion Cells

Ningshengjie Gao, Sangwook Kim, Parameswara Chinnam, Eric J. Dufek, Andrew M. Colclasure, Andrew Jansen, Seoung-Bum Son, Ira Bloom, Alison Dunlop, Stephen Trask, Kevin L. Gering

Abstract

Abstract Selection, testing and validation of electrolyte candidates for Li-ion cells are discussed, based on a 10-minute target for extreme fast charge (XFC). A combination of modeling and laboratory measurements create a timely and synergistic approach to identifying candidate electrolyte formulations. Multi-solvent systems provide a balanced set of properties, wherein lower molecular-weight solvents offer reduced viscosity, increased species diffusivity, and mitigation of concentration polarization at high charge rates. Carefully selected formulations can exhibit peak conductivity and usable conductivity range of two to three times that of the baseline EC-EMC (3:7, wt.) + LiPF6. Candidates are also chosen based on stability and longevity within the cell environment. Lab testing coincides with property predictions from the Advanced Electrolyte Model (AEM) and a macro-scale cell model. Cell testing utilized coin and pouch cells having NMC532 or NMC811 cathodes with graphite electrodes. Results indicate combinations of low-molecular weight solvents are key for fast-charge electrolytes as they extend the useful conductivity range to both low and higher salt concentrations, and possess higher self-diffusivities compared to conventional solvents. This reduces impacts from concentration polarization. The choice of electrolyte also influences the tendency for lithium metal deposition at the anode, as showcased by experimental and modeling results herein.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Enabling fast charging – Introduction and overview10.1016/j.jpowsour.2017.08.008 ↗
2. Requirements for enabling extreme fast charging of high energy density Li-ion cells while avoiding lithium plating10.1149/2.0451908jes ↗
3. Electrode scale and electrolyte transport effects on extreme fast charging of lithium-ion cells10.1016/j.electacta.2020.135854 ↗
4. Lithium-ion battery fast charging: A review10.1016/j.etran.2019.100011 ↗
5. Challenges and opportunities towards fast-charging battery materials10.1038/s41560-019-0405-3 ↗
6. Logan · Electrochem. Soc. Interface · 2019 · 4910.1149/2.F04192if ↗
7. A convective transport theory for high rate discharge in lithium ion cells10.1016/j.electacta.2012.09.109 ↗
8. Solute-volume effects in electrolyte transport10.1016/j.electacta.2014.05.009 ↗
9. Prediction of electrolyte viscosity for aqueous and non-aqueous systems: Results from a molecular model based on ion solvation and a chemical physics framework10.1016/j.electacta.2005.09.011 ↗
10. Benchmarking conductivity predictions of the advanced electrolyte model (AEM) for aqueous systems10.1149/2.0142001JES ↗
11. Prediction of electrolyte conductivity: results from a generalized molecular model based on ion solvation and a chemical physics framework10.1016/j.electacta.2016.12.083 ↗
12. A critical evaluation of the advanced electrolyte model10.1149/2.0471814jes ↗
13. Heterogeneous behavior of lithium plating during extreme fast charging10.1016/j.xcrp.2020.100114 ↗
14. Chemical stability and long-term cell performance of low-cobalt, Ni-Rich cathodes prepared by aqueous processing for high-energy Li-Ion batteries10.1016/j.ensm.2019.08.020 ↗
15. Effect of anode porosity and temperature on the performance and lithium plating during fast-charging of lithium-ion cells
16. Apparent increasing lithium diffusion coefficient with applied current in graphite10.1149/1945-7111/abaf9f ↗
17. How fast can a Li-ion battery be charged? Determination of limiting fast charging conditions10.1021/acsaem.0c03114 ↗
18. Investigation of lithium plating-stripping process in Li-ion batteries at low temperature using an electrochemical model10.1149/2.0661810jes ↗
19. Quantification of inactive lithium and solid−electrolyte interphase species on graphite electrodes after fast charging10.1021/acsenergylett.0c00859 ↗
20. Extreme Fast Charge Challenges for Lithium-Ion Battery: Variability and Positive Electrode Issues10.1149/2.0731910jes ↗
21. Effect of capillary element aspect ratio on the dynamic imbibition within porous networks10.1006/jcis.2002.8468 ↗
22. Enabling fast charging of lithium-ion batteries through secondary-/dual-pore network: Part II - numerical model10.1016/j.electacta.2020.136013 ↗
23. Enabling fast charging of lithium-ion batteries through secondary-/dual- pore network: Part I - Analytical diffusion model10.1016/j.electacta.2020.136034 ↗
24. Fast charging of Li-ion cells: Part IV. Temperature effects and “safe lines” to avoid lithium plating10.1149/1945-7111/abb70d ↗
25. Spatial dynamics of lithiation and lithium plating during high-rate operation of graphite electrodes10.1039/D0EE01191F ↗
26. Fingerprinting redox heterogeneity in electrodes during extreme fast charging10.1149/1945-7111/ab8fd7 ↗
27. Fast charging of lithium-ion batteries via electrode engineering10.1149/1945-7111/ab7fb9 ↗
28. Exploring classes of co-solvents for fast-charging lithium-ion cells10.1149/2.1351810jes ↗
29. Effects of electrolyte composition on lithium plating in lithium-ion cells10.1149/1.3544439 ↗
30. Low-temperature study of lithium-ion cells using a LiySn micro-reference electrode10.1016/j.jpowsour.2007.06.235 ↗
31. Lithium plating in lithium-ion batteries investigated by voltage relaxation and in situ neutron diffraction10.1016/j.jpowsour.2016.12.032 ↗
32. Lithium plating in lithium-ion batteries at sub-ambient temperatures investigated by in situ neutron diffraction10.1016/j.jpowsour.2014.07.168 ↗
33. Anode potential controlled charging prevents lithium plating10.1039/D0TA04467A ↗
34. In Operando Detection of the Onset and Mapping of Lithium Plating Regimes during Fast Charging of Lithium-Ion Batteries10.1021/acsami.0c07803 ↗
35. Analysis of internal short-circuit in a lithium ion cell10.1016/j.jpowsour.2009.05.002 ↗
36. Extreme Fast Charge Challenges for Lithium-Ion Battery: Variability and Positive Electrode Issues10.1149/2.0731910jes ↗
37. Investigating the solid electrolyte interphase using binder-free graphite electrodes10.1016/j.jpowsour.2007.08.112 ↗
38. A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries10.1016/j.electacta.2010.05.072 ↗
39. Fast charge-driven Li plating on anode and structural degradation of cathode10.1149/1945-7111/abc031 ↗
40. Quantitative and time-resolved detection of lithium plating on graphite anodes in lithium ion batteries10.1016/j.mattod.2017.11.001 ↗
41. Li plating as unwanted side reaction in commercial Li-ion cells – A review10.1016/j.jpowsour.2018.02.063 ↗
42. In situ X-ray spatial profiling reveals uneven compression of electrode assemblies and steep lateral gradients in lithium-ion coin cells10.1039/D0CP04436A ↗
43. The state of understanding of the lithium-ion-battery graphite solid electrolyte interphase (SEI) and its relationship to formation cycling10.1016/j.carbon.2016.04.008 ↗