journal article·2021-06

Thermoelectric generation via tellurene for wearable applications: recent advances, research challenges, and future perspectives

E. Liu, A. Negm, M.M.R. Howlader

Publisher page

Abstract

Abstract Wearable real-time, non-invasive personalized health monitoring sensors and low-power electronics critically necessitate alternative power supplies because batteries have proven insufficient due to their demerits of charging cycles and periodic degradation and replacement. Thermoelectric energy harnessing from human body heat via the Seebeck effect is an effective route to develop flexible thermoelectric generators that enables continuous power supply for the wearable devices. This review focuses on critically assessing the theory, the performance, fabrication, and future steps of thermoelectric generation using two-dimensional (2D) tellurene and aims to provide insights as to how to integrate 2D tellurene into practical, durable wearable generators. The literature survey shows that 2D Tellurene nanomaterial has exceptional thermoelectric properties including high thermoelectric figure of merit (ZT) as high as 2.9, and it possesses fabrication process-dependent thermoelectric properties and forms desirable electrical contacts. The flexible nature of 2D tellurene with high environmental stability and high strain resistance of up to 36% and Young's modulus of 27 GPa under bending conditions makes it an excellent material for especially wearable applications. Future research should focus on developing thermoelectric theory with computational methods for tellurene and its manufacturing methods to develop proof-of-concepts for thermoelectric devices. We hope this review would be a seminal work in the growing frontier of 2D tellurene wearable thermoelectrics for sensors for real-time monitoring of personalized health status.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · 2D Materials and Applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (88)

Show source-provided references
1. Wearable thermoelectric generators for human body heat harvesting10.1016/j.apenergy.2016.08.150 ↗
2. Flexible sensing electronics for wearable/attachable health monitoring10.1002/smll.201602790 ↗
3. Polymers and organic materials-based PH sensors for healthcare applications10.1016/j.pmatsci.2018.03.008 ↗
4. A review of the state of the science on wearable thermoelectric power generators (TEGs) and their existing challenges10.1016/j.rser.2017.01.177 ↗
5. Flexible thermoelectric materials and devices10.1016/j.apmt.2018.07.004 ↗
6. 2013
7. A review on bismuth telluride (Bi2Te3) nanostructure for thermoelectric applications10.1016/j.rser.2017.10.112 ↗
8. Advanced thermoelectric design: from materials and structures to devices10.1021/acs.chemrev.0c00026 ↗
9. Exceptional thermoelectric properties of flexible Organic−inorganic hybrids with monodispersed and periodic nanophase10.1038/s41467-018-06251-9 ↗
10. 2003
11. Monolayer β-tellurene: a promising p-type thermoelectric material via first-principles calculations10.1039/C9NR04176A ↗
12. Unusually low thermal conductivity of atomically thin 2D tellurium10.1039/C8NR01649F ↗
13. Field-effect transistors made from solution-grown two-dimensional tellurene10.1038/s41928-018-0058-4 ↗
14. Tellurene-based saturable absorber to demonstrate large-energy dissipative soliton and noise-like pulse generations10.1515/nanoph-2019-0545 ↗
15. Tellurene photodetector with high gain and wide bandwidth10.1021/acsnano.9b04507 ↗
16. Solar-blind deep-ultraviolet photodetectors based on solution-synthesized Quasi-2D Te nanosheets10.1515/nanoph-2019-0539 ↗
17. Kirkham · 2014
18. Doping and processing of organic semiconductors for plastic thermoelectrics
19. Advances in thermoelectric materials research: looking back and moving forward10.1126/science.aak9997 ↗
20. Altenkirch · Phys. Z. · 1909 · 10 · 560
21. Tactfully decoupling interdependent electrical parameters via interstitial defects for SnTe thermoelectrics10.1016/j.nanoen.2019.104292 ↗
22. Nolas · 2001
23. The thermoelectric figure of merit and its relation to thermoelectric generators†10.1080/00207215908937186 ↗
24. Mahan · 1998 · vol. 1 · 81
25. Wang · 2013 · vol. 182 · 3
26. Thermoelectric efficiency and compatibility10.1103/PhysRevLett.91.148301 ↗
27. Thermoelectric materials: principles, structure, properties, and ApplicationsT.M. Tritt
28. Enhancement of thermoelectric figure of merit through nanostructural control on intermetallic semiconductors toward high-temperature applications
29. Intrinsically minimal thermal conductivity in cubic I − V − VI 2 semiconductors10.1103/PhysRevLett.101.035901 ↗
30. New perspectives for Rashba spin–orbit coupling10.1038/nmat4360 ↗
31. Enhanced thermoelectric performance in the Rashba semiconductor BiTeI through band gap engineering10.1088/0953-8984/28/8/085801 ↗
32. Two-dimensional thermoelectrics with Rashba spin-split bands in bulk BiTeI10.1103/PhysRevB.90.195210 ↗
33. Topological insulators in Bi2Se3, Bi2Te3 and Sb2Te3 with a single Dirac cone on the surface10.1038/nphys1270 ↗
34. Two-dimensional tellurene as excellent thermoelectric material10.1021/acsaem.8b00032 ↗
35. Two-dimensional tellurium: progress, challenges, and prospects10.1007/s40820-020-00427-z ↗
36. High thermoelectric performance in two-dimensional tellurium: an ab initio study10.1021/acsami.8b11836 ↗
37. The thermoelectric properties of bismuth telluride10.1002/aelm.201800904 ↗
38. Electronic and thermoelectric properties of few-layer transition metal dichalcogenides10.1063/1.4869142 ↗
39. High thermoelectric figure of merit in heavy hole dominated PbTe10.1039/c0ee00456a ↗
40. Realizing high-performance thermoelectric power generation through grain boundary engineering of skutterudite-based nanocomposites10.1016/j.nanoen.2017.10.003 ↗
41. Tellurene: its physical properties, scalable nanomanufacturing, and device applications10.1039/C8CS00598B ↗
42. Multivalency-driven formation of Te-based monolayer materials: a combined first-principles and experimental study10.1103/PhysRevLett.119.106101 ↗
43. Thermoelectric properties of two-dimensional selenene and tellurene from group-VI elements10.1039/C8CP04069A ↗
44. Emerging two-dimensional monoelemental materials (Xenes) for biomedical applications10.1039/C8CS00823J ↗
45. Microwave-assisted synthesis of single-crystalline tellurium nanorods and nanowires in ionic liquids10.1002/anie.200353101 ↗
46. One-dimensional van Der Waals material tellurium: Raman spectroscopy under strain and magneto-transport10.1021/acs.nanolett.7b01717 ↗
47. Controlled hydrothermal synthesis of thin single-crystal tellurium nanobelts and nanotubes10.1002/1521-4095(20021118)14:22<1658::AID-ADMA1658>3.0.CO;2-2 ↗
48. Aqueous chemical synthesis of tellurium nanowires using a polymeric template for thermoelectric materials10.1039/C4CE02222J ↗
49. Synthesis and characterization of high-purity tellurium nanowires via self-seed-assisted growth approach10.1007/s11664-015-4154-1 ↗
50. Van der Waals epitaxy and photoresponse of hexagonal tellurium nanoplates on flexible mica sheets10.1021/nn5028104 ↗
51. Epitaxial growth and band structure of Te film on graphene10.1021/acs.nanolett.7b01029 ↗
52. Ultrathin 2D nonlayered tellurium nanosheets: facile liquid-phase exfoliation, characterization, and photoresponse with high performance and enhanced stability10.1002/adfm.201705833 ↗
53. Ultrathin 2D nonlayered tellurene nanosheets as saturable absorber for picosecond pulse generation in all-fiber lasers10.1109/JSTQE.2020.2992625 ↗
54. One-pot hydrothermal synthesis of thin tellurene nanosheet and its formation mechanism
55. Data-driven and probabilistic learning of the process-structure-property relationship in solution-grown tellurene for optimized nanomanufacturing of high-performance nanoelectronics10.1016/j.nanoen.2018.12.065 ↗
56. Highly crystalline synthesis of tellurene sheets on two-dimensional surfaces: control over helical chain direction of tellurene10.1103/PhysRevMaterials.2.104002 ↗
57. Enhanced carrier mobility and tunable electronic properties in α-tellurene monolayer via an α-tellurene and h-BN heterostructure10.1039/D0CP00269K ↗
58. Interlayer coupling and external electric field tunable electronic properties of a 2D type-I α-tellurene/MoS 2 heterostructure10.1039/C8TC03286F ↗
59. Tuning the electronic and optical properties of type-I PbI2/α-Tellurene van Der Waals heterostructure via biaxial strain and external electric field10.1016/j.apsusc.2019.144824 ↗
60. Ferromagnetic half-metal properties of two dimensional vertical tellurene/VS2 heterostructure: a first-principles study10.1016/j.commatsci.2019.109215 ↗
61. Monolayer tellurene–metal contacts10.1039/C8TC01421C ↗
62. Tunable Schottky and ohmic contacts in graphene and tellurene van Der Waals heterostructures10.1039/C9CP04654B ↗
63. Thermoelectric performance of 2D tellurium with accumulation contacts10.1021/acs.nanolett.8b05144 ↗
64. Wearable electronics self-powered by using human body heat: the state of the art and the perspective10.1063/1.3255465 ↗
65. Thermoelectric energy harvesting of human body heat for wearable sensors10.1109/JSEN.2013.2252526 ↗
66. Power output and efficiency of a thermoelectric generator under temperature control10.1016/j.enconman.2016.09.039 ↗
67. A TEG efficiency booster with buck–boost conversion10.1007/s11664-012-2407-9 ↗
68. Shen · ACS Nano · 2020 · 14 · 30310.1021/acsnano.9b04507 ↗
69. Highly-efficient heterojunction solar cells based on two-dimensional tellurene and transition metal dichalcogenides10.1039/C9TA00280D ↗
70. Study on the strain-induced mechanical property modulations in monolayer tellurene10.1063/1.5079934 ↗
71. Wearable thermoelectric generator to harvest body heat for powering a miniaturized accelerometer10.1016/j.apenergy.2018.02.062 ↗
72. Thermoelectric energy harvesting: basic principles and applications
73. Computational and experimental study of a complete heat dissipation system using water as heat carrier placed on a thermoelectric generator10.1016/j.energy.2014.06.094 ↗
74. Optimisation of thermoelectric module geometry for ‘waste heat’ electric power generation10.1016/0378-7753(92)80114-Q ↗
75. Optimal pellet geometries for thermoelectric power generation10.1109/TCAPT.2009.2039934 ↗
76. Optimal design of thermoelectric generators embedded in a thermal resistance network10.1109/TCPMT.2013.2295169 ↗
77. Multi-objective and multi-parameter optimization of a thermoelectric generator module10.1016/j.energy.2014.04.082 ↗
78. Thermoelectric device and optimum external load parameter and slenderness ratio10.1016/j.energy.2010.07.019 ↗
79. Optimized thermoelectrics for energy harvesting applications
80. A dynamic model for thermoelectric generator applied to vehicle waste heat recovery10.1016/j.apenergy.2017.11.004 ↗
81. Flexible thermoelectric power generator with Y-type structure using electrochemical deposition process10.1016/j.apenergy.2017.05.005 ↗
82. A wearable thermoelectric generator fabricated on a glass fabric10.1039/c4ee00242c ↗
83. Polymer integration for packaging of implantable sensors10.1016/j.snb.2014.05.063 ↗
84. NeuroMEMS: neural probe microtechnologies10.3390/s8106704 ↗
85. Polyurethane-based microfluidic devices for blood contacting applications10.1039/c2lc21075d ↗
86. Enhanced Cu/LCP adhesion by pre-sputter cleaning prior to Cu deposition10.1109/TADVP.2005.848522 ↗
87. Integration of self-assembled diblock copolymers for semiconductor capacitor fabrication10.1063/1.1383805 ↗
88. Nano-materials enabled thermoelectricity from window glasses10.1038/srep00841 ↗