Exposed facet engineering design of graphene-SnO2 nanorods for ultrastable Li-ion batteries
Source abstract
Abstract
Abstract Many routes are developed to prepare ultrastable electrode materials for Li-ion batteries (LIBs), whereas it is effective but still challenge to design promising ones through exposed facet engineering route. Here, graphene-SnO2 material is selected as a potential candidate due to its high theoretical capacity and conductivity. The ab initio density functional theory (DFT) calculations are firstly used here to predict the possible property of SnO2 materials with different exposed facets: (211) facet is found to have the relatively high surface energy and a lower energy barrier towards Li+ when compared with other planes. Then the graphene-SnO2 nanorods with highly exposed (211) facets (GSn-211) is fabricated by utilizing a crystalline-spacing-matching method. When tested as anode for LIBs, GSn-211 indeed shows a great electrochemical property: ultrastable cycling stability (695 mAh/g at 0.2 A/g after even 500 cycles) and an outstanding rate capability (530 mAh/g at 5 A/g). The Li-ions anisotropic transport and the atomic-scale ledged behaviors of GSn-211 along (211) are further visualized via an in situ TEM at atomic level, in which the Sn/O atoms-peeling-off through (211) facet is observed. This indicates (211) planes hold high active sites towards Li-ions insertion, leading to a fast Li+ storage. Combined with theoretical calculations, their atomistic mechanical properties during lithiation are explored: the decrease of bulk modulus means the GSn-211 is softened after the initial lithiated state leads to better structural stability. These findings provide a novel perspective for the advanced anode design for LIBs via the exposed facet engineering method.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Graphene research and applications · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Introduction to hybrid electric vehicles, battery electric vehicles, and off-road electric vehicles10.1016/B978-1-78242-377-5.00001-7 ↗
2. review of the stage-of-the-art charging technologies, placement methodologies, and impacts of electric vehicles10.1016/j.rser.2016.06.033 ↗
3. A review on the state-of-the-art technologies of electric vehicle, its impacts and prospects10.1016/j.rser.2015.04.130 ↗
4. An improved control method of battery energy storage system for hourly dispatch of photovoltaic power sources10.1016/j.enconman.2013.04.013 ↗
5. Advanced materials for energy storage10.1002/adma.200903328 ↗
6. Designed synthesis of coaxial SnO2@Carbon hollow nanospheres for highly reversible lithium storage10.1002/adma.200803439 ↗
7. Nanostructured metal oxide-based materials as advanced anodes for lithium-ion batteries10.1039/c2nr11966h ↗
8. Nano active materials for lithium-ion batteries10.1039/c0nr00068j ↗
9. High-energy-surface engineered metal oxide micro- and nanocrystallites and their applications10.1021/ar400092x ↗
10. Nanomaterials of high surface energy with exceptional properties in catalysis and energy storage10.1039/c0cs00176g ↗
11. Tin-based amorphous oxide: a high capacity lithium-ion storage material10.1126/science.276.5317.1395 ↗
12. N‐doped graphene‐SnO2 sandwich paper for high‐performance lithium‐ion batteries10.1002/adfm.201103110 ↗
13. Crystal structure prediction from first principles10.1038/nmat2321 ↗
14. Predicting solid compounds via global exploration of the energy landscape of solids on the ab initio level without recourse to experimental information10.1002/pssb.200945246 ↗
15. Ab initio random structure searching
16. 2011 · 37 · 742
17. Ab initio materials design using conformational space annealing and its application to searching for direct band gap silicon crystals10.1016/j.cpc.2016.02.011 ↗
18. Ab initio study on preferred growth of ZnO10.1016/j.scriptamat.2010.11.021 ↗
19. Curving effects of concave dodecahedral nanocarbons enable enhanced Li-ion storage10.1039/C8TA04934C ↗
20. Irradiated graphene loaded with SnO2 quantum dots for energy storage10.1021/acsnano.5b05146 ↗
21. One-step argon/nitrogen binary plasma jet irradiation of Li4Ti5O12 for stable high-rate lithium ion battery anodes10.1016/j.jpowsour.2014.11.074 ↗
22. Thermoelectric power generation from lanthanum strontium titanium oxide at room temperature through the addition of graphene10.1021/acsami.5b03522 ↗
23. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
24. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
25. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
26. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
27. Comparison of methods for finding saddle points without knowledge of the final states10.1063/1.1809574 ↗
28. Improved tangent estimate in the nudged elastic band method for finding minimum energy paths and saddle points10.1063/1.1323224 ↗
29. Co3O4 nanocages with highly exposed {110} facets for high-performance lithium storage10.1038/srep02543 ↗
30. Reduced SnO2 surfaces by first-principles calculations10.1063/1.1646460 ↗
31. Ultrathin nanoporous Fe3O4-carbon nanosheets with enhanced supercapacitor performance10.1039/c2ta01035f ↗
32. self-healable and highly stretchable supercapacitor based on a dual crosslinked polyelectrolyte10.1038/ncomms10310 ↗
33. Self-assembled hierarchical MoO2/graphene nanoarchitectures and their application as a high-performance anode material for lithium-ion batteries10.1021/nn201802c ↗
34. Atomic mechanism of dynamic electrochemical lithiation processes of MoS2 nanosheets10.1021/ja501686w ↗
35. Enhanced cyclic performance and lithium storage capacity of SnO2/graphene nanoporous electrodes with three-dimensionally delaminated flexible structure10.1021/nl802484w ↗
36. In situ TEM nanoindentation and dislocation-grain boundary interactions: a tribute to David Brandon10.1007/s10853-006-0472-2 ↗
37. Binding SnO2 nanocrystals in nitrogen-doped graphene sheets as anode materials for lithium-ion batteries10.1002/adma.201300071 ↗
38. Improved lithium cyclability and storage in mesoporous SnO2 electronically wired with very low concentrations (≤ 1%) of reduced graphene oxide10.1002/chem.201200352 ↗
39. Facile one-pot synthesis of mesoporous SnO2 microspheres via nanoparticles assembly and lithium storage properties10.1021/cm7031288 ↗
40. Superior cycle performance and high reversible capacity of SnO2/graphene composite as an anode material for lithium-ion batteries10.1038/srep09055 ↗
41. Dramatically enhanced reversibility of Li2O in SnO2-based electrodes: the effect of nanostructure on high initial reversible capacity10.1039/C5EE03367E ↗
42. High-resolution electron microscopy investigation of capacity fade in SnO2 electrodes for lithium-ion batteries10.1149/1.1391957 ↗
43. Nanostructured SnO2 composite anodes for lithium ion batteries10.1021/nn4016899 ↗
44. Greatly enhanced electronic conduction and lithium storage of faceted TiO2 crystals supported on metallic substrates by tuning crystallographic orientation of TiO210.1002/adma.201500198 ↗
45. In situ observation of the electrochemical lithiation of a single SnO2 nanowire electrode10.1126/science.1195628 ↗
46. In situ atomic-scale imaging of electrochemical lithiation in silicon10.1038/nnano.2012.170 ↗
47. In situ atomic force microscopy study of dimensional changes during Li+ ion intercalation/de-intercalation in highly oriented pyrolytic graphite10.1016/j.elecom.2004.11.015 ↗
48. Super-high rate stretchable polypyrrole-based supercapacitors with excellent cycling stability10.1016/j.nanoen.2014.10.031 ↗
49. Elastic behavior of crystalline Li-Sn phases with increasing Li concentration10.1016/j.jpowsour.2012.02.022 ↗