journal article·2025-10Open access

Fluorinated electrolytes for lithium–sulfur and beyond-lithium metal–sulfur batteries

Avinash Raulo, Saheed Lateef, Hunter McRay, Kaushek Rahul Ilancheran, Fabio Albano, Golareh Jalilvand

Abstract

Metal–sulfur batteries, particularly lithium–sulfur (Li–S) systems, have attracted significant attention due to their high theoretical energy densities, low cost, and sustainability benefits arising from sulfur’s abundance and non-toxicity. Despite extensive research, their practical deployment remains limited by persistent challenges such as polysulfide shuttling and metal anode degradation, which collectively lead to poor coulombic efficiency and limited cycle life. These issues are further intensified in emerging systems employing sodium, potassium, magnesium, calcium, and siliconbased anodes. Fluorinated electrolytes have emerged as a promising approach to address these limitations. Fluorination enhances oxidative stability, suppresses polysulfide dissolution, promotes stable solid–electrolyte interphase (SEI) formation, and improves safety. Although widely studied in lithium-ion and lithium-metal batteries, fluorinated electrolytes remain underexplored in metal–sulfur systems, despite growing evidence of their potential to mitigate key degradation pathways. This review provides a mechanism-focused analysis of fluorinated electrolytes for metal–sulfur batteries, with a particular emphasis on Li–S systems. It begins by assessing the limitations of conventional electrolytes and examines how fluorinated solvents, salts, and additives influence polysulfide solubility, electrode interfacial stability, and overall electrochemical performance. The discussion then extends to emerging non-lithium metal–sulfur systems, where fluorinated electrolytes can improve stability. Environmental and economic considerations are addressed, followed by an outlook on key parameters and target goals for realizing practical metal–sulfur batteries by leveraging fluorinated electrolytes. By connecting electrolyte design to specific failure mechanisms, this review establishes a framework for targeted materials development and outlines future directions for advancing high-performance, practical metal–sulfur batteries.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. A review of rechargeable batteries for portable electronic devices10.1002/inf2.12000 ↗
2. Sustainable battery materials for next-generation electrical energy storage10.1002/aesr.202000102 ↗
3. New approaches for high energy density lithium–Sulfur battery cathodes10.1021/ar3001348 ↗
4. Towards practical lean-electrolyte Li–S batteries: highly solvating electrolytes or sparingly solvating electrolytes?10.26599/NRE.2022.9120012 ↗
5. Recent advances in electrolytes for lithium–Sulfur batteries10.1002/aenm.201500117 ↗
6. Recent advances in multifunctional binders for high sulfur loading lithium-sulfur batteries10.1002/adfm.202307108 ↗
7. An expansion-mitigant binder for stable cycling of high-loading lithium–Sulfur batteries10.1021/acsami.5c01464 ↗
8. Advances in fibrous materials for high-capacity lithium sulfur batteries10.1016/j.nanoen.2024.109265 ↗
9. Self-structured binder confinement of sulfur for highly durable lithium-sulfur batteries10.1021/acsaem.3c01205 ↗
10. Raulo
11. Effect of carbon morphology and slurry formulation in sulfur cathode for Li-S batteries10.1149/1945-7111/ad9ad4 ↗
12. Understanding the effects of binder dissolution dynamics on the chemistry and performance of lithium–Sulfur batteries10.1039/D5EB00062A ↗
13. The role of electrocatalytic materials for developing post-lithium metal||sulfur batteries10.1038/s41467-024-49164-6 ↗
14. A progress report on metal–Sulfur batteries10.1002/adfm.202004084 ↗
15. Electrochemical properties of ether-based electrolytes for lithium/sulfur rechargeable batteries10.1016/j.electacta.2012.11.001 ↗
16. High energy rechargeable Li-S cells for EV application: status, remaining problems and solutions10.1149/1.3414001 ↗
17. Cationic surfactant for lithium-sulfur batteries enables efficient use of sulfur and limits lithium dendrite formation
18. Lithium–Sulfur batteries—The solution is in the electrolyte, but is the electrolyte a solution?10.1039/C4EE02192D ↗
19. A review of electrolytes for lithium–Sulphur batteries10.1016/j.jpowsour.2014.01.023 ↗
20. Thiol-based electrolyte additives for high-performance lithium-sulfur batteries10.1016/j.nanoen.2016.12.015 ↗
21. The electrochemical performance of lithium–Sulfur batteries with LiClO4 DOL/DME electrolyte10.1007/s10800-009-9978-z ↗
22. Fluorinated electrolytes for Li-ion batteries: the lithium difluoro(Oxalato)borate additive for stabilizing the solid electrolyte interphase10.1021/acsomega.7b01196 ↗
23. Fluorinated electrolytes for 5 V lithium-ion battery chemistry10.1039/c3ee24414h ↗
24. Critical review of fluorinated electrolytes for high-performance lithium metal batteries10.1002/adfm.202300502 ↗
25. Fluorine-free electrolytes in batteries: principles, strategies, and advances10.1039/D4EE04820B ↗
26. Elimination of fluorination: the influence of fluorine-free electrolytes on the performance of LiNi1/3 Mn1/3 Co1/3 O2 /silicon–Graphite Li-ion battery cells10.1021/acssuschemeng.0c01733 ↗
27. Fluorinated ether based electrolyte for high-energy lithium–Sulfur batteries: Li+ solvation role behind reduced polysulfide solubility10.1021/acs.chemmater.7b03654 ↗
28. Lithium-sulfur battery with partially fluorinated ether electrolytes: interplay between capacity, coulombic efficiency and Li anode protection10.1016/j.jpowsour.2019.226939 ↗
29. Recent progress in fluorinated electrolytes for improving the performance of Li–S batteries10.1016/j.jechem.2019.05.010 ↗
30. Nontraditional approaches to enable high-energy and long-life lithium–Sulfur batteries10.1021/acs.accounts.3c00400 ↗
31. On the surface chemical aspects of very high energy density, rechargeable Li–Sulfur batteries10.1149/1.3148721 ↗
32. Ether-based high-voltage lithium metal batteries: the road to commercialization10.1021/acsnano.4c00110 ↗
33. Role of LiNO3 in rechargeable lithium/sulfur battery10.1016/j.electacta.2012.03.081 ↗
34. Lithium–Sulfur cells: the gap between the State-of-the-art and the requirements for high energy battery cells10.1002/aenm.201401986 ↗
35. The relationship between the relative solvating power of electrolytes and shuttling effect of lithium polysulfides in lithium-sulfur batteries10.1002/anie.201807367 ↗
36. Molecular design for electrolyte solvents enabling energy-dense and long-cycling lithium metal batteries10.1038/s41560-020-0634-5 ↗
37. Application of partially fluorinated ether for improving performance of lithium/sulfur batteries10.1149/2.0281508jes ↗
38. Lithium-sulfur battery with partially fluorinated ether electrolytes: interplay between capacity, coulombic efficiency and Li anode protection10.1016/j.jpowsour.2019.226939 ↗
39. Cao, J.; Tornheim, A.; Glossmann, T.; Hintennach, A.; Rojas, T.; Meisner, Q.; Sahore, R.; Liu, Q.; Wang, Y.; Ngo, A.; Curtiss, L.A.; Zhang, Z. Understanding the impact of a nonafluorinated ether-based electrolyte on Li-S battery - IOPscience. 2019. https://doi.org/10.1149/2.0751915jes.10.1149/2.0751915jes ↗
40. Electrolyte with low polysulfide solubility for Li–S batteries10.1021/acsaem.8b00317 ↗
41. Guiding maps of solvents for lithium-sulfur batteries via a computational data-driven approach10.1016/j.patter.2023.100799 ↗
42. New high donor electrolyte for lithium–Sulfur batteries10.1002/adma.202005022 ↗
43. Dilution of highly concentrated LiBF4/propylene carbonate electrolyte solution with fluoroalkyl ethers for 5-V LiNi0.5Mn1.5O4 positive electrodes10.1149/2.0611701jes ↗
44. Polarization effects of fluorine on the relative permittivity in polyimides10.1021/ma00099a006 ↗
45. Solvate ionic liquid electrolyte for Li–S batteries10.1149/2.111308jes ↗
46. A selection rule for hydrofluoroether electrolyte Co-solvent: establishing a linear free-energy relationship in lithium–Sulfur batteries10.1002/anie.201904240 ↗
47. Electrolytes with moderate lithium polysulfide solubility for high-performance long-calendar-life lithium–Sulfur batteries10.1073/pnas.2301260120 ↗
48. Rational solvent molecule tuning for high-performance lithium metal battery electrolytes10.1038/s41560-021-00962-y ↗
49. Monolithic solid–Electrolyte interphases formed in fluorinated orthoformate-based electrolytes minimize Li depletion and pulverization10.1038/s41560-019-0464-5 ↗
50. On the way toward understanding solution chemistry of lithium polysulfides for high energy Li–S redox flow batteries10.1002/aenm.201500113 ↗
51. Restricting the solubility of polysulfides in Li-S batteries via electrolyte salt selection10.1002/aenm.201600160 ↗
52. A LiFSI–LiTFSI binary-salt electrolyte to achieve high capacity and cycle stability for a Li–S battery10.1039/C4CC06666A ↗
53. Anion-involved solvation structure of lithium polysulfides in lithium–Sulfur batteries
54. High voltage and robust lithium metal battery enabled by highly-fluorinated interphases10.1016/j.ensm.2022.07.003 ↗
55. Design rules for selecting fluorinated linear organic solvents for Li metal batteries10.1021/acs.jpclett.1c01522 ↗
56. A low-concentration all-fluorinated electrolyte for stable lithium metal batteries10.1039/D2CC04427G ↗
57. Juggling formation of HF and LiF to reduce crossover effects in carbonate electrolyte with fluorinated Co-solvents for high-voltage lithium metal batteries10.1002/adfm.202212000 ↗
58. Effect of dielectric constant of solvent on the conductivity behavior of polymer gel electrolytes10.1007/s10853-005-6950-0 ↗
59. A DFT investigation on the origins of solvent-dependent polysulfide reduction mechanism in rechargeable Li-S batteries10.3390/catal10080911 ↗
60. Synthesis and electrochemical properties of partially fluorinated ether solvents for lithiumsulfur battery electrolytes10.1016/j.jpowsour.2018.08.097 ↗
61. Guiding maps of solvents for lithium-sulfur batteries via a computational data-driven approach10.1016/j.patter.2023.100799 ↗
62. Fluorinated carbamate-based electrolyte enables anion-dominated solid electrolyte interphase for highly reversible Li metal anode10.1021/acsnano.3c06088 ↗
63. A hybrid electrolyte for long-life semi-solid-State lithium sulfur batteries10.1039/C7TA04017B ↗
64. Strategies towards high performance lithium-sulfur batteries
65. Yan, S.; Liu, H.; Lu, Y.; Feng, Q.; Zhou, H.; Wu, Y.; Hou, W.; Xia, Y.; Zhou, H.; Zhou, P.; Song, X.; Ou, Y.; Liu, K. Selectively fluorinated aromatic lithium salts regulate the solvation structure and interfacial chemistry for all-solid-State batteries. Sci. Adv. 11 (5), eads4014. https://doi.org/10.1126/sciadv.ads4014.10.1126/sciadv.ads4014 ↗
66. Ultralean electrolyte Li-S battery by avoiding gelation catastrophe10.1021/acsami.2c10906 ↗
67. Lithium salts for advanced Lithium batteries: Li–Metal, Li–O 2, and Li–S10.1039/C5EE01215E ↗
68. A monofluoride ether-based electrolyte solution for fast-charging and low-temperature non-aqueous lithium metal batteries10.1038/s41467-023-36793-6 ↗
69. Understanding the thermal instability of fluoroethylene carbonate in LiPF 6 -based electrolytes for lithium ion batteries10.1016/j.electacta.2016.12.126 ↗
70. Elucidating the solvation structure and dynamics of lithium polysulfides resulting from competitive salt and solvent interactions10.1021/acs.chemmater.7b00068 ↗
71. Sparingly solvating electrolytes for high energy density lithium–Sulfur batteries10.1021/acsenergylett.6b00194 ↗
72. Improved performance of lithium–Sulfur battery with fluorinated electrolyte10.1016/j.elecom.2013.10.020 ↗
73. Recent progress in fluorinated electrolytes for improving the performance of Li–S batteries10.1016/j.jechem.2019.05.010 ↗
74. A high performance lithium–Sulfur battery enabled by a fish-scale porous carbon/sulfur composite and symmetric fluorinated diethoxyethane electrolyte10.1039/C7TA01057E ↗
75. Solvating power series of electrolyte solvents for lithium batteries10.1039/C9EE00141G ↗
76. Fluorinated ether based electrolyte for high-energy lithium–Sulfur batteries: Li+ solvation role behind reduced polysulfide solubility10.1021/acs.chemmater.7b03654 ↗
77. Fluorinated electrolytes for Li-S battery: suppressing the self-discharge with an electrolyte containing fluoroether solvent10.1149/2.0431501jes ↗
78. Insight into lithium–Metal anodes in lithium–Sulfur batteries with a fluorinated ether electrolyte10.1039/C5TA03195H ↗
79. Ultrasound assisted design of sulfur/carbon cathodes with partially fluorinated ether electrolytes for highly efficient Li/S batteries10.1002/adma.201204051 ↗
80. Understanding the effect of a fluorinated ether on the performance of lithium–Sulfur batteries10.1021/acsami.5b01412 ↗
81. Solvation-property relationship of lithium-sulphur battery electrolytes10.1038/s41467-023-44527-x ↗
82. Bis(2,2,2-Trifluoroethyl) ether As an electrolyte Co-solvent for mitigating self-discharge in lithium–Sulfur batteries10.1021/am501665s ↗
83. Tackling the capacity fading issue of Li–S battery by a functional additive—Hexafluorobenzene10.1021/acsaem.0c00177 ↗
84. Suppressing the dissolution of polysulfides with Co-solvent fluorinated diether towards high-performance lithium sulfur batteries10.1039/C6CP04775K ↗
85. High-fluorinated electrolytes for Li–S batteries10.1002/aenm.201803774 ↗
86. Electrolytes and interphases in Li-ion batteries and beyond10.1021/cr500003w ↗
87. Localized high-concentration sulfone electrolytes for high-efficiency lithium-metal batteries10.1016/j.chempr.2018.05.002 ↗
88. High-voltage lithium-metal batteries enabled by localized High-concentration electrolytes
89. High-efficiency lithium metal batteries with fire-retardant electrolytes10.1016/j.joule.2018.05.002 ↗
90. Polysulfide shuttle study in the Li/S battery system10.1149/1.1806394 ↗
91. Understanding the effects of the low-concentration electrolyte on the performance of high-energy-density Li–S batteries10.1021/acsami.1c07883 ↗
92. Sulfur-infiltrated micro- and mesoporous silicon carbide-derived carbon cathode for high-performance lithium Sulfur batteries10.1002/adma.201301579 ↗
93. A new class of solvent-in-salt electrolyte for high-energy rechargeable metallic lithium batteries10.1038/ncomms2513 ↗
94. Hydrofluoroether diluted dual-salts-based electrolytes for lithium-sulfur batteries with enhanced lithium anode protection10.1002/smll.202205017 ↗
95. Electrolyte solutions design for lithium-sulfur batteries10.1016/j.joule.2021.06.009 ↗
96. A catalytic electrolyte additive modulating molecular orbital energy levels of lithium polysulfides for high-performance lithium–Sulfur batteries10.1021/acsami.3c10163 ↗
97. Inhibiting polysulfide shuttle in lithium–Sulfur batteries through low-ion-pairing salts and a triflamide solvent10.1002/ange.201701026 ↗
98. Effect of LiBOB as additive on electrochemical properties of lithium–Sulfur batteries10.1007/s11581-011-0628-1 ↗
99. LiFSI as a functional additive of the fluorinated electrolyte for rechargeable Li-S batteries10.1007/s10854-021-05310-0 ↗
100. An effective approach to protect lithium anode and improve cycle performance for Li–S batteries10.1021/am504345s ↗