Effect of Intermolecular Interaction of Compound Surfactant on Particle Removal in Post-Cu CMP Cleaning
Source abstract
Abstract
This study focused on compound surfactant for particle removal in post CMP cleaning, including selection of surfactant to compound, compound mechanism, and particle removal efficiency of compound surfactant. The wettability and stability of surfactants with different hydrophilic and hydrophobic groups were analyzed by contact angle and surface tension comparison. AES (1000 ppm) and JFC-E (2500 ppm) were selected for compounding research. The intermolecular interaction of compound surfactant was studied by analyzing the FTIR spectrum of surfactants on copper surface and the zeta potential of the particles in the cleaning solution. The intermolecular interaction parameters βm related to surface tension, and βs related to contact angle. The particle removal efficiency is closely related to the CMC and concentration of each component, and compound AES (1000 ppm) and JFC-E (2500 ppm) at volume ratio of 2:3 achieved the best particle removal efficiency. And it has certain guiding significance for the development of cleaning solution.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Surface Roughness and Optical Measurements · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Effect of arginine-based cleaning solution on BTA residue removal after Cu-CMP10.1016/j.colsurfa.2019.124286 ↗
2. Application of surfactant for facilitating benzotriazole removal and inhibiting copper corrosion during post-CMP cleaning10.1016/j.mee.2018.09.005 ↗
3. Effect of a novel chelating agent on defect removal during post-CMP cleaning10.1016/j.apsusc.2016.03.230 ↗
4. Post-CMP Cleaning of InGaAs surface for the removal of nanoparticle contaminants for sub-10 nm device applications10.1149/2.0051905jss ↗
5. The effect of citric acid based cleaning solution on particle adhesion and removal during post-Cu CMP cleaning10.1016/j.mee.2019.111090 ↗
6. Environment friendly chemical mechanical polishing of copper10.1016/j.apsusc.2018.10.133 ↗
7. BTA free alkaline slurries developed for copper and barrier CMP10.1149/2.0171511jss ↗
8. Role of dispersant agent on scratch reduction during copper barrier chemical mechanical planarization10.1149/2.0101806jss ↗
9. Characterization of non-amine-based post-copper chemical mechanical planarization cleaning solution10.1016/j.mee.2014.02.034 ↗
10. Effect and mechanism of BTA removal by alkaline polyhydroxy polyamines chelating agent after Cu CMP10.13290/j.cnki.bdtjs.2018.04.009 ↗
11. A novel cleaner for colloidal silica abrasive removal in post-Cu CMP cleaning10.1088/1674-4926/36/10/106002 ↗
12. Effects of novel inhibitor on galvanic corrosion of copper and cobalt and particle removal10.1149/2.0201909jss ↗
13. Cleaning methodology of small residue defect with surfactant in copper chemical mechanical polishing post-cleaning10.1016/j.tsf.2016.05.007 ↗
14. Optimization of cleaning process parameters to remove abrasive particles in post-Cu CMP cleaning10.1088/1674-4926/39/12/126002 ↗
15. Investigation of the barrier slurry with better defect performance and facilitating post- CMP cleaning10.1016/j.mee.2016.12.002 ↗
16. Minimization of chemical-mechanical planarization(CMP) defects and post-CMP cleaning10.1116/1.590901 ↗
17. The effect of additives in post-Cu CMP cleaning on particle adhesion and removal10.1149/1.1802493 ↗
18. Adsorption of sodium dodecyl sulfate on cleaning of an N-polar GaN surface in an alkaline solution10.1016/j.mseb.2017.04.003 ↗
19. Effect of AEO6 on particle removal during post Cu CMP clean10.16552/j.cnki.issn1001-1625.2018.10.041 ↗
20. A novel alkaline cleaning solution for post Cu-CMP cleaning based on anionic surfactant10.13250 /j.cnki.wndz.2017.11.009 ↗
21. Effect of surfactant and electrolyte on surface modification of c-plane GaN substrate using chemical mechanical planarization (CMP) process10.1016/j.colsurfa.2016.02.035 ↗
22. Performance of sodium dodecyl sulfate in slurry with glycine and hydrogen peroxide for copper-chemical mechanical polishing10.1149/1.3494159 ↗
23. Interaction forces between silica particles and wafer surfaces during chemical mechanical planarization of copper10.1149/1.1566417 ↗
24. Addition of surfactants in ozonated water cleaning for the suppression of functional group formation and particle adhesion on the SiO2 surface10.1016/j.apsusc.2010.11.004 ↗
25. Method for determining stability of CMP slurry10.1149/2.0241808jss ↗
26. Study of synergic effect of LAS-polyether blend surfactant system10.13218/j.cnki.csdc.2007.05.002 ↗
27. Interactions between octyl methyl sulfoxide and ionic surfactants in aqueous solutions10.3866/PKU.WHXB19880204 ↗
28. Non-ionic surfactant on particles removal in post-CMP cleaning10.1088/1674-4926/36/2/026002 ↗