journal article·2023-03-01

Biocomposites: Prospects and Manifold Applications for Human and Environmental Sustainability

Shilpi Lavania, Jimmy Mehta, Pallavi Bhardwaj, Ashutosh Tripathi, Niraj Gupta, Pallav Gupta

Publisher page

Abstract

Bio-polymers composites have gained much popularity for the development of eco-friendly devices and biodegradable products. A clean, pollution-free environment and reduction of waste materials are the need of the hour. Being biocompatible and biodegradable, these polymers offer a solution. The utilization of bio-polymers composite is not limited to an alternative to petrochemical-based material but these are progressively being equipped in electronics, medicine, pharmaceutics, construction, automobile, packaging, adhesive industry, and so forth. Smart bio-polymers are lightweight, possess higher strength, good thermal properties, low density, and require less energy while integrating and assembling. As green technology is the demand of the future, the production of biodegradable composites, bio-binders, and bio-fibers is the toughest challenge. This review paper strives to specifically address the electrical and mechanical properties of bio-polymers composites and their applications in electronic and mechanical industries.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Dr. Bhimrao Ambedkar University

Manav Rachna International Institute of Research and Studies

Amity University Uttar Pradesh

Shri Ramswaroop Memorial University

References (100+)

Show source-provided references
1. Biopolymer composites: a review10.1080/24759651.2021.1881214 ↗
2. Electromagnetic interference shielding effectiveness of new conducting polymer composite10.1080/10601320903399834 ↗
3. Physical, optical, and electrical properties of a new conducting polymer10.1007/s10853-009-3491-y ↗
4. 2 - electrical conductivity behavior of biopolymer composites
5. Characterization of tapioca starch biopolymer composites reinforced with micro scale water hyacinth fibers10.1002/star.201700287 ↗
6. Charge transport and thermal properties of polyindole, polycarbazole and their derivatives10.1016/j.tca.2004.04.028 ↗
7. Study of physically transient insulating materials as a potential platform for transient electronics and bioelectronics10.1002/adfm.201304186 ↗
8. Amyloid-like peptide nanofiber templated titania nanostructures as dye-sensitized solar cell anodic materials10.1039/c3ta11542a ↗
9. Evaluation of mechanical and interfacial properties of bio-composites based on poly(Lactic Acid) with natural cellulose fibers10.3390/ijms20040960 ↗
10. Removal of lead by adsorption with the renewable biopolymer composite of feather (Dromaius novaehollandiae) and chitosan (Agaricus bisporus)10.1016/j.eti.2016.04.004 ↗
11. Functionalized conjugated polymers for sensing and molecular imprinting applications10.1016/j.progpolymsci.2018.08.001 ↗
12. Biocompatibility and mechanical properties of a totally absorbable composite material for orthopaedic fixation devices10.1002/jab.770030306 ↗
13. Preliminary biocompatibility screening of several biodegradable phosphate fiber reinforced polymers10.1002/jab.770040102 ↗
14. Functionalized graphene sheet-Poly(vinylidene fluoride) conductive nanocomposites10.1002/polb.21695 ↗
15. Enhancing mechanical behaviors of collapsible soil using two biopolymers10.1016/j.jrmge.2016.11.007 ↗
16. Preparation and mechanical characterization of chicken feather/PLA composites10.1002/pc.23644 ↗
17. Characterization of Ecklonia cava alginate films containing cinnamon essential oils10.3390/ijms19113545 ↗
18. Designing polyaniline (PANI) and polyvinyl alcohol (PVA) based electrically conductive nanocomposites: preparation, characterization and blood compatible study10.1080/10601320903004533 ↗
19. Conductive polymers: Towards a smart biomaterial for tissue engineering10.1016/j.actbio.2014.02.015 ↗
20. Preparation, characterization and electrical study of gum arabic/ZnO nanocomposites10.1007/s12034-015-0961-5 ↗
21. Electromagnetic interference shielding of cellulose triacetate/multiwalled carbon nanotube composite films10.1002/pc.21062 ↗
22. Electrical properties and electromagnetic interference shielding effectiveness of multiwalled carbon nanotubes-reinforced EMA nanocomposites10.1002/pc.22167 ↗
23. Polycarbazole and its derivatives: synthesis and applications. a review of the last 10 years10.3390/polym12102227 ↗
24. Review paper: Progress in the field of conducting polymers for tissue engineering applications10.1177/0885328211402704 ↗
25. Influence of chemical modification on hemp-starch concrete10.1016/j.conbuildmat.2015.02.045 ↗
26. Effects of different moisture contents on physical properties of PVA-gelatin films10.1007/s11483-012-9273-0 ↗
27. Electrochemical properties of chitosan-Co3O4 nanocomposite films10.1016/j.jelechem.2011.04.002 ↗
28. Chitosan/NiO nanocomposites: a potential new dielectric material10.1039/c1jm12011e ↗
29. Electrical and magnetic properties of chitosan-magnetite nanocomposites10.1016/j.physb.2010.01.106 ↗
30. 2022
31. In-situ synthesis and characterization of electrically conductive polypyrrole/graphene nanocomposites10.1016/j.polymer.2010.10.014 ↗
32. Tunable electrical conductivity and dielectric properties of triglycine sulfate-polypyrrole composite10.1016/j.cej.2012.01.081 ↗
33. Optical and dielectric properties of ZnO-PVA nanocomposites10.1002/pssa.200778863 ↗
34. A chemically polymerized electrically conducting composite of polypyrrole nanoparticles and polyurethane for tissue engineering10.1002/jbm.a.33128 ↗
35. Morphological and structural analysis of polyaniline and poly(o-anisidine) layers generated in a DC glow discharge plasma by using an oblique angle electrode deposition configuration10.3390/polym9120732 ↗
36. Design and fabrication methods for biocomposites
37. Physical, chemical and mechanical properties of pehuen cellulosic husk and its pehuen-starch based composites10.1016/j.carbpol.2012.07.029 ↗
38. Nanostructured ZnO materials: synthesis, properties and applications
39. Strengthening of Korean residual soil with ?-1,3/1,6-glucan biopolymer10.1016/j.conbuildmat.2011.11.030 ↗
40. Geotechnical behavior of a beta-1,3/1,6-glucan biopolymer-treated residual soil10.12989/gae.2014.7.6.633 ↗
41. Effects of Xanthan gum biopolymer on soil strengthening10.1016/j.conbuildmat.2014.10.026 ↗
42. The drying effect on xanthan gum biopolymer treated sandy soil shear strength10.1016/j.conbuildmat.2018.11.120 ↗
43. Biopolymer stabilization of mine tailings10.1061/(ASCE)GT.1943-5606.0000902 ↗
44. Effects of single-modification/cross-modification of starch on the mechanical properties of new biodegradable composites10.1039/C8RA01592A ↗
45. Solution-processable hole-generation layer and electron-transporting layer: towards high-performance, alternating-current-driven, field-induced polymer electroluminescent devices10.1002/adfm.201303242 ↗
46. Mechanical and thermal properties of chicken feather fiber/PLA green composites10.1016/j.compositesb.2009.04.011 ↗
47. Effect of the bio-absorbent on the microwave absorption property of the flaky CIPs/rubber absorbers10.1016/j.jmmm.2015.04.050 ↗
48. Shape memory polyurethane nanocomposites with functionalized graphene10.1088/0964-1726/21/7/075017 ↗
49. Highly stretchable resistive pressure sensors using a conductive elastomeric composite on a micropyramid array10.1002/adma.201305182 ↗
50. Processability and degradability of PHA-based composites in terrestrial environments10.3390/ijms20020284 ↗
51. Structure and stereochemistry of electrochemically synthesized poly-(l-naphthylamine) from neutral aceto- nitrile solution10.2298/JSC0212867C ↗
52. Synthesis and characterization of polypyrrole-hyaluronic acid composite biomaterials for tissue engineering applications10.1002/(SICI)1097-4636(20000615)50:4<574::AID-JBM13>3.0.CO;2-I ↗
53. Chitin nanofibrils in poly(Lactic Acid) (PLA) nanocomposites: dispersion and thermo-mechanical properties10.3390/ijms20030504 ↗
54. Flexible nanodielectric materials with high permittivity for power energy storage10.1002/adma.201301752 ↗
55. Mechanical properties of biodegradable polymers and composites proposed for internal fixation of bone10.1002/jab.770010109 ↗
56. Enhanced dielectric properties in polyvinyl alcohol - Multiwall carbon nanotube composites10.1016/j.matchemphys.2015.10.045 ↗
57. Stabilization of pond ash using biopolymer10.1016/j.proeps.2015.06.033 ↗
58. Geotechnical techniques for the construction of reactive barriers10.1016/S0304-3894(99)00044-8 ↗
59. Curaua leaf fiber ( Ananas comosus var. erectifolius ) reinforcing poly(lactic acid) biocomposites: formulation and performance10.1002/pc.23059 ↗
60. Colloidal dispersions of surfactant-stabilized polypyrrole particles10.1021/la00027a007 ↗
61. Electrical conductivities of synthesized poly o- phenylenediamine and its nanocomposites10.21474/IJAR01/4243 ↗
62. Synergistic effect of vanadium pentoxide and graphene oxide in polyvinyl alcohol for energy storage application10.1016/j.eurpolymj.2016.01.022 ↗
63. Synthesis and applications of biopolymer composites10.3390/ijms20092321 ↗
64. Critical review of recent publications on use of natural composites in infrastructure10.1016/j.compositesa.2011.11.019 ↗
65. 50 years of electrical-stress control in cable accessories10.1109/MEI.2013.6585856 ↗
66. Synthesis and investigation of the electrical and dielectric properties of Co3O4/(CMC + PVA) nanocomposite films10.1007/s10965-015-0732-4 ↗
67. Core–shell structured biopolymer@BaTiO 3 nanoparticles for biopolymer nanocomposites with significantly enhanced dielectric properties and energy storage capability10.1021/acs.jpcc.5b09619 ↗
68. Sandwich composites of polyurethane reinforced with poly(3,4-ethylene dioxythiophene)-coated multiwalled carbon nanotubes with exceptional electromagnetic interference shielding properties10.1039/C5RA14105B ↗
69. Physical and mechanical properties of PLA composites reinforced by TiO 2 grafted flax fibers10.1016/j.matdes.2016.05.103 ↗
70. Recent advances in fabrication and characterization of graphene-polymer nanocomposites10.4236/graphene.2012.12005 ↗
71. Thermally stimulated dielectric properties of polyvinylidenefluoride-zinc oxide nanocomposites10.1007/s10973-010-1190-1 ↗
72. Mechanical properties of biodegradable polymers for medical applications
73. Polyfuran: a new synthetic approach and electronic properties10.1021/ja00079a035 ↗
74. Biopolymer composites for electromagnetic interference shielding
75. Effect of maleated PLA on the properties of rotomolded PLA-agave fiber biocomposites10.1007/s10924-018-1308-2 ↗
76. A comparison of the mechanical characteristics of kenaf and lyocell fibre reinforced poly(lactic acid) (PLA) and poly(3-hydroxybutyrate) (PHB) composites10.1016/j.compositesa.2011.09.007 ↗
77. A comparison of the mechanical characteristics of kenaf and lyocell fibre reinforced poly(lactic acid) (PLA) and poly(3-hydroxybutyrate) (PHB) composites10.1016/j.compositesa.2011.09.007 ↗
78. Conducting polymers in biomedical engineering10.1016/j.progpolymsci.2007.05.012 ↗
79. Electromagnetic interference shielding behavior of poly(trimethylene terephthalate)/multi-walled carbon nanotube composites10.1016/j.compscitech.2011.06.014 ↗
80. Improved nanoindentation and microwave shielding properties of modified MWCNT reinforced polyurethane composites10.1039/c3ta11611e ↗
81. Microstructure, dielectric response and electrical properties of polypyrrole modified (poly N-vinyl carbazole-Fe3O4) nanocomposites10.1016/j.synthmet.2011.05.008 ↗
82. Biodegradable and toughened composite of poly(propylene carbonate)/thermoplastic polyurethane (PPC/TPU): effect of hydrogen bonding10.3390/ijms19072032 ↗
83. Electrical properties of Fe II -terpyridine-modified cellulose nanocrystals and polycaprolactone/Fe II -CTP nanocomposites10.1002/pc.23468 ↗
84. Investigation of soil stabilization using chitosan biopolymer10.1016/j.jclepro.2017.09.256 ↗
85. Semiconducting and metallic polymers: the fourth generation of polymeric materials10.1021/jp011611w ↗
86. Temperature dependent dielectric and conductivity studies of polyvinyl alcohol-ZnO nanocomposite films by impedance spectroscopy10.1063/1.4933286 ↗
87. Overall performance of natural rubber/graphene nanocomposites10.1016/j.compscitech.2012.08.012 ↗
88. Cellulose composite aerogel for highly efficient electromagnetic interference shielding10.1039/C4TA05998K ↗
89. Effect of fiber surface treatment of poultry feather fibers on the properties of their polymer matrix composites10.1002/app.38306 ↗
90. Biocompatibility of polyaniline10.1016/j.synthmet.2012.02.024 ↗
91. A physically transient form of silicon electronics10.1126/science.1226325 ↗
92. Synthesis and properties of electroconductive polymeric composite material based on polypyrrole10.5402/2012/320316 ↗
93. Dai · 200410.1007/b97517 ↗
94. Indigo - a natural pigment for high performance ambipolar organic field effect transistors and circuits10.1002/adma.201102619 ↗
95. Green and biodegradable electronics10.1016/S1369-7021(12)70139-6 ↗
96. Exotic materials for bio-organic electronics10.1039/C0JM02444A ↗
97. Influence of selected treatment on tensile properties of short pineapple leaf fiber reinforced tapioca resin biopolymer composites10.1007/s10924-018-1296-2 ↗
98. A review on the chemical and electrochemical copolymerization of conducting monomers: recent advancements and future prospects10.1080/25740881.2019.1669647 ↗
99. Biodegradable conducting polymeric materials for biomedical applications: a review10.1002/mds3.10141 ↗
100. A short review on the synthesis, characterization, and application studies of poly(1-naphthylamine): a seldom explored polyaniline derivative10.1007/s00396-017-4129-2 ↗