Expansion of Nanosized MgSiO 3 /Chitosan Nanocomposite Structural and Spectroscopic for Loading Velosef by Nanomaterial Intervention
Source abstract
Abstract
The aim of this study is to investigate the effect of different doses of Velosef in magnesium silica/chitosan nanocomposite in terms of structural, morphology, optical properties, and bioactivity. Loading Velosef in fine-sized magnesium silica/chitosan is an efficient engineering approach for drug delivery. The sol-gel process was used to prepare magnesium silica fine-sized before being blended into chitosan matrix, which acts as a potential morphogenetic biomaterial. The Velosef /magnesium silica/chitosan nanocomposites were characterized by XRD, TEM, SEM, FTIR, UV-absorption, and antimicrobial studies. The XRD was characteristic the crystallinity degree of the MgO-SiO 2 /chitosan/ Velosef nanocomposites with a three maximum peaks at 26.37°, 33.34o, 36.9°. FTIR results indicated the structural change occurred with the Velosef sol-gel polymerization process. UV-absorbance reveals that the MgO-SiO 2 /chitosan nanocomposite appeared a high performance for loading Velosef at two absorption bands at 253 and 347 nm. The MgO-SiO 2 /Chitosan/ Velosef nanocomposites showed considerable antimicrobial activity in opposition to the tested representative microorganisms. The maximum antimicrobial activity was obtained with MgO-SiO 2 /Chitosan against both Escherichia coli and Candida albicans (37 mm), while the minimum antimicrobial activity (30 mm) was recorded against B. mycoides and E. coli with control.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Magnesium Oxide Properties and Applications · Graphene and Nanomaterials Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Nanoparticles: a boon to drug delivery, therapeutics, diagnostics and imaging Nanomedicine10.1016/j.nano.2011.05.016 ↗
2. Sol gel synthesis of hybrid chitosan/calcium aluminosilicate nanocomposite membranes and its application as support for CO2 sensor10.1016/j.ijbiomac.2018.12.077 ↗
3. Structural investigations on lipid nanoparticles containing high amounts of lecithin10.1016/j.ejps.2005.10.004 ↗
4. Sustained release drug delivery system with the role of natural polymers: a review10.22270/jddt.v9i3-s.2859 ↗
5. Sol–gel based materials for biomedical applications10.1016/j.pmatsci.2015.12.001 ↗
6. Polysaccharides as building blocks for nanotherapeutics10.1039/C1CS15239D ↗
7. Chitosan from shrimp residues with a saturated solution of calcium chloride in methanol and water10.1016/j.carres.2020.108116 ↗
8. Identification of Fe3 + co-doped zinc titanate mesostructures using dielectric and antimicrobial activities10.1007/s13762-020-02786-x ↗
9. Microstructure and antimicrobial properties of bioactive cobalt co-doped copper aluminosilicate nanocrystallines10.1007/s12633-019-00326-y ↗
10. Eu2O3 role in the optical and photoluminescence properties of 50SiO2-7MgO-20ZnO-(23-x)La2O3-xEu2O3 nano-crystalline thin films10.1007/s00339-019-3207-3 ↗
11. Sol-gel materials for bioceramic applications10.1016/S1359-0286(97)80053-8 ↗
12. Sol-gel preparation and spectroscopic properties of modified sodium silicate/tartrazine dye nanocomposite10.1007/s12633-017-9740-9 ↗
13. Novel injectable neutral solutions of chitosan form biodegradable gels in situ10.1016/S0142-9612(00)00116-2 ↗
14. A review of chitosan and its derivatives in bone tissue engineering10.1016/j.carbpol.2016.05.049 ↗
15. Synthesis and characterisation of MWNT/chitosan and MWNT/chitosan-crosslinked buckypaper membranes for desalination10.1016/j.desal.2017.05.031 ↗
16. Optical, functional impact and antimicrobial of chitosan/phosphosilicate/Al2O3 nanosheets10.1007/s10904-020-01469-x ↗
17. Ganoderma lucidum polysaccharide loaded sodium alginate micro-particles prepared via electrospraying in controlled deposition environments10.1016/j.ijpharm.2017.03.064 ↗
18. Silica-chitosan nanocomposite mediated pH-sensitive drug delivery10.1016/j.jddst.2018.11.022 ↗
19. Preparation and characterization of BSA and chitosan nanopartices for sustainable delivery system for quercetin10.7324/JAPS.2015.50701 ↗
20. The effect of the molecular weight of chitosan nanoparticles and its application on drug delivery10.1016/j.microc.2009.02.001 ↗
21. Chitosan oleate-tripolyphosphate complex-coated calcium alginate bead: Physicochemical aspects of concurrent core-coat formation10.1016/j.carbpol.2021.118487 ↗
22. Synthesis and application in drug delivery of hollow-core-double-shell magnetic iron oxide/silica/calcium silicate nanocomposites10.1016/j.matlet.2013.04.005 ↗
23. Enoxaparin-immobilized poly(ε-caprolactone)- based nanogels for sustained drug delivery systems10.1515/pac-2013-1110 ↗
24. Targeting calcium magnesium silicates for polycaprolactone/ceramic composite scaffolds10.1021/ab500011x ↗
25. Synthesis, structural analysis, electrochemical and antimicrobial activities of copper magnesium zirconosilicate (Cu20Mg10Si40Zr(30-x)O:(x = 0,5,7,10) Ni2+) nanocrystals10.1016/j.microc.2020.105881 ↗
26. Investigation of silicates as a catalyst in biodiesel production: A review10.1002/er.3546 ↗
27. Structural and thermal properties of monolithic silica-phosphate (SiO2-P2O5) gel glasses prepared by sol-gel technique10.1007/s10971-011-2420-0 ↗
28. Preparation and rapid analysis of antibacterial silver, copper and zinc doped sol-gel surfaces10.1016/j.colsurfb.2012.01.035 ↗
29. Novel nanoparticles based on chitosan-dicarboxylate conjugates via tandem ionotropic/covalent crosslinking with tripolyphosphate and subsequent evaluation as drug delivery vehicles10.1016/j.ijpharm.2017.06.061 ↗
30. Influences of Ag-NPs doping chitosan/calcium silicate nanocomposites for optical and antibacterial activity10.1016/j.ijbiomac.2016.08.045 ↗
31. Novel natural composite films as packaging materials with enhanced properties10.1016/j.ijbiomac.2019.06.130 ↗
32. Application of response surface methodology to optimize the extracellular fungal mediated nanosilver green synthesis10.1016/j.jgeb.2017.08.003 ↗
33. Thermal, dielectric and antimicrobial properties of polystyrene-assisted/ITO:Cu nanocomposites10.1007/s00339-018-2351-5 ↗
34. Influence of the polymer amount on bioactivity and biocompatibility of SiO2/PEG hybrid materials synthesized by sol–gel technique10.1016/j.msec.2014.12.035 ↗
35. Cobalt nanofibers coated with layered nickel silicate coaxial core–shell composites as excellent anode materials for lithium ion batteries10.1016/j.jcis.2017.11.078 ↗
36. Compositional effects and optical properties of P2O5 doped magnesium silicate mesoporous thin films10.1007/s13369-020-05067-4 ↗
37. Bifunctional silica nanospheres with 3-aminopropyl and phenyl groups. Synthesis approach and prospects of their applications10.1016/j.apsusc.2017.05.150 ↗
38. Silica stabilized magnetic-chitosan beads for removal of arsenic from water10.1016/j.colcom.2017.06.003 ↗
39. Stability, adsorption and electrokinetic properties of the chitosan/silica system10.1016/j.colsurfa.2018.06.056 ↗
40. Characterization of chitosan magnetic nanoparticles for in situ delivery of tissue plasminogen activator10.1016/j.carbpol.2010.11.052 ↗
41. Influence of NiO on structural, optical, and magnetic properties of Al2O3–P2O5–Na2O magnetic porous nanocomposites nucleated by SiO210.1016/j.solidstatesciences.2020.106454 ↗
42. Porous and nanofiber α-chitosan obtained from blue crab (Callinectes sapidus) tested for antimicrobial and antioxidant activities10.1016/j.lwt.2015.10.001 ↗
43. Han · Sol–gel-derived organic–inorganic hybrid materials J. Non. Cryst. Solids · 2007 · 353 · 31310.1016/j.jnoncrysol.2006.05.042 ↗
44. extraction and characterization of chitin and chitosan from parapenaeus longirostris from moroccan local sources10.1080/1023666X.2014.902577 ↗
45. Rapid and highly selective removal of lead in simulated wastewater of rare-earth industry using diglycolamic-acid functionalized magnetic chitosan adsorbents10.1016/j.jiec.2017.10.053 ↗
46. The structure and properties of a novel nanocomposite films from chitosan and layered zirconium phosphonate10.1002/app.33253 ↗
47. Adsorption and intercalation of low and medium molar mass chitosans on/in the sodium montmorillonite10.1016/j.ijbiomac.2016.08.007 ↗
48. Green sol–gel synthesis of novel nanoporous copper aluminosilicate for the eradication of pathogenic microbes in drinking water and wastewater treatment10.1007/s11356-019-04431-8 ↗
49. Does the use of chitosan contribute to oxalate kidney stone formation?10.3390/md13010141 ↗
50. Modern template design and biological evaluation of cephradine-loaded magnesium calcium silicate nanocomposites as an inhibitor for nosocomial bacteria in biomedical applications10.1007/s12633-020-00642-8 ↗
51. Magnetic targeted nanoparticles based on β-cyclodextrin and chitosan for hydrophobic drug delivery and a study of their mechanism10.1039/C7RA02398G ↗