Mechanism and Process Window Study for Die-to-Wafer (D2W) Hybrid Bonding
Source abstract
Abstract
Room temperature hybrid bonding is a good candidate to replace thermal compression bonding due to its better resistance to Cu oxidation and its capability for large die integration. However, the bonding mechanism with Cu thickness non-uniformity and real dishing conditions has not yet been fully understood. To study the mechanism and to explore the window of annealing temperature for the void-free interface, finite element analysis (FEA) and auxiliary experiments with real process issues have been conducted. A Cu thickness variation of 6.6% across the whole wafer after electroplating causes a metal dishing between 4 and 16 nm during chemical mechanical planarization. The critical stress (78.1 MPa) of dielectric material gives the upper boundary of temperature, and the complete contact of metal limits the lower boundary for our FEA models. The window for the annealing temperature is then simulated to be within a range between 295 °C and 302 °C. This is the first time that FEA with a non-uniform process input has been implemented to generate a process window of die-to-wafer (D2W) hybrid bonding for real world application. This paper provides a deep understanding and practical guidance for D2W hybrid bonding.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: 3D IC and TSV technologies · Electronic Packaging and Soldering Technologies · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Wafer-level 3D integration technology10.1147/JRD.2008.5388565 ↗
2. Heterogeneous integration at fine pitch (≤10 μm) using thermal compression bonding
3. Tong · 2005
4. Cu–Cu diffusion bonding enhancement at low temperature by surface passivation using self-assembled monolayer of alkane-thiol10.1063/1.3263154 ↗
5. Low temperature CuCu thermo-compression bonding with temporary passivation of self-assembled monolayer and its bond strength enhancement10.1016/j.microrel.2011.04.003 ↗
6. Interface and reliability analysis of au-passivated Cu–Cu fine-pitch thermocompression bonding for 3-D IC applications10.1109/TCPMT.2019.2912891 ↗
7. Novel Cu-to-Cu bonding with ti passivation at 180 $^\circ\rm C$ in 3-D integration10.1109/LED.2013.2285702 ↗
8. Development of underfilling and thermo-compression bonding processes for stacking multi-layer 3D ICs10.1109/ESTC.2014.6962710 ↗
9. Atomic layer deposited Al2O3 encapsulation for the silicon interconnect fabric10.1109/ECTC32862.2020.00198 ↗
10. 1μm pitch direct hybrid bonding with <300 nm wafer-to-wafer overlay accuracy10.1109/S3S.2017.8309213 ↗
11. Ultra-fine pitch 3D integration using face-to-face hybrid wafer bonding combined with a via-middle through-silicon-via process10.1109/ECTC.2016.205 ↗
12. <200 Nm wafer-to-wafer overlay accuracy in wafer level Cu/SiO2 hybrid bonding for BSI CIS10.1109/EPTC.2015.7412403 ↗
13. Hybrid bonding for 3D stacked image sensors: impact of pitch shrinkage on interconnect robustness10.1109/IEDM.2018.8614570 ↗
14. Reliable 300 Mm wafer level hybrid bonding for 3D stacked CMOS image sensors10.1109/ECTC.2016.202 ↗
15. Dishing-radius model of copper CMP dishing effects10.1109/TSM.2005.845110 ↗
16. Wafer-to-wafer hybrid bonding development by advanced finite element modeling for 3-D IC packages10.1109/TCPMT.2020.3035652 ↗
17. Cu/SiO2 hybrid bonding: finite element modeling and experimental characterization10.1109/ESTC.2016.7764484 ↗
18. Modelling and characterization on wafer to wafer hybrid bonding technology for 3D IC packaging10.1109/EPTC47984.2019.9026578 ↗
19. Cu-SiO2 hybrid bonding simulation including surface roughness and viscoplastic material modeling: a critical comparison of 2D and 3D modeling approach10.1016/j.microrel.2018.05.005 ↗
20. Thermomechanical finite element modeling of Cu–SiO2 direct hybrid bonding with a dishing effect on Cu surfaces10.1016/j.ijsolstr.2016.02.041 ↗
21. Damascene copper electroplating for chip interconnections10.1147/rd.425.0567 ↗
22. Search for the optimal control over current regimes in electroplating processes with multi anodes at a diversified assortment of treated articles10.1134/S1064230719010064 ↗
23. Understanding and improving the uniformity of electrodeposition10.1016/S0257-8972(02)00916-7 ↗
24. Improving the uniformity of the coating thickness distribution during electroplating treatment of products using multi anode baths10.1016/j.matpr.2019.07.036 ↗
25. Enabling ultra-thin die to wafer hybrid bonding for future heterogeneous integrated systems10.1109/ECTC.2019.00097 ↗
26. Protective layer for collective die to wafer hybrid bonding10.1109/3DIC48104.2019.9058870 ↗
27. Low temperature Si3N4 direct bonding10.1063/1.109002 ↗
28. Combined surface activated bonding technique for low-temperature Cu/dielectric hybrid bonding10.1149/2.0201607jss ↗