journal article·2021-05-01

Review—Different Ceramic Reinforcements In Aluminium Metal Matrix Composites

Siddesh Kumar N. M., T N Shashank, Dhruthi

Publisher page

Abstract

The current study focuses on the effect of the different ceramic reinforcement on the aluminium composite. The pros and cons of AMMCs are studied. In SiC reinforced composite’s wear resistance, tensile strength and hardness will be improved, as it acts as an obstacle to the dislocation of atoms. B 4 C reinforced composites form more pores and agglomeration by the increase in B 4 C content however the hardness improves at the expense of ductility. TiC reinforced composite’s interfacial bonding is good below 600 °C and the coefficient of thermal expansion reduces by increasing TiC weight percentage also mechanical properties like tensile and compressive strength improves. Al 2 O 3 reinforcement will make grains finer hence adding Al 2 O 3 improves the mechanical properties of the composite and it doesn’t react with the matrix at high temperature. ZrO 2 reinforcement will improve the hardness and wear resistance although primary wear happens due to micro-cutting and oxidation. As mentioned each reinforcement has both advantages and disadvantages, based on the application required reinforcement will be selected.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Application of modern aluminium alloys to aircraft
2. Improving the tribological characteristics of aluminum 6061 alloy by surface compositing with sub-micro-size ceramic particles via friction stir processing10.1016/j.wear.2010.11.046 ↗
3. Influence of ceramic particulate type on microstructure and tensile strength of aluminum matrix composites produced using friction stir processing10.1016/j.jascer.2016.04.002 ↗
4. Friction stir processing—State of the art10.1016/j.acme.2017.06.002 ↗
5. Mechanical properties, characterization and wear behavior of powder metallurgy composites-a review10.1016/j.matpr.2020.03.389 ↗
6. Study on mechanical and ballistic performances of boron carbide reinforced Al 6061 aluminum alloy produced by powder metallurgy10.1016/j.compositesb.2018.04.043 ↗
7. Microstructure and mechanical properties of Al-Al2O3 micro and nano composites fabricated by stir casting10.1016/j.msea.2011.08.052 ↗
8. Singh · ISTE 110 Wear Characterization of Aa6082/Sic Composite Produced By Mechanical Stir Casting Process Department of Mechanical & Engineering, Noida Institute of Engineering and * Corresponding author Email Id : shashi_gla47@rediffmail.com. October 2014 · 2013 · 2
9. Analysis of stir die cast Al-SiC composite brake drums based on coefficient of friction10.1016/j.triboint.2012.02.007 ↗
10. Processing of advanced Al/SiC particulate metal matrix composites under intensive shearing - A novel Rheo-process10.1016/j.compositesa.2008.10.017 ↗
11. Optimization of tribological properties of Al-6082/SiC metal matrix composite by grey-taguchi’s method
12. Experimental investigation on silicon carbide reinforced Duralumin based mmc produced by cold compacting10.24247/ijmperdapr201949 ↗
13. Investigation of Mechanical and Morphology of Al-SiC composites processed by PM Route10.1088/1757-899X/225/1/012277 ↗
14. Mihir · International Journal of Advance Engineering and Research Development of Al-SiC Compsite Material By Powder Metaullargy Route. · 2015 · 2 · 182
15. Friction stir processing: A novel technique for fabrication of surface composite10.1016/S0921-5093(02)00199-5 ↗
16. Fabrication of al 6082/SiC composite for microstructure, micro-hardness, tensile strength and wear properties using multi-pass friction stir processing
17. Synthesis and characterization of titanium carbide particulate reinforced AA6082 aluminium alloy composites via friction stir processing10.1016/j.acme.2014.05.010 ↗
18. Microstructures and mechanical properties of Al/Al2O3 surface nano-composite layer produced by friction stir processing10.1016/j.msea.2008.09.064 ↗
19. Friction stir processing: A novel technique for fabrication of surface composite10.1016/S0921-5093(02)00199-5 ↗
20. Fabrication and evaluation of mechanical and tribological properties of boron carbide reinforced aluminum matrix nanocomposites10.1016/j.matdes.2011.02.033 ↗
21. Effect of friction stir processing (FSP) on microstructure and properties of Al-TiC in situ composite10.1016/j.msea.2011.02.085 ↗
22. Processing and characterization of AA6082/TiC composites by stir casting10.1680/emr.13.00043 ↗
23. Synthesis and tribological characterization of in situ cast Al-TiC composites10.1016/j.wear.2005.01.051 ↗
24. Reaction products of Al/TiC composites fabricated by the pressureless infiltration technique10.1007/s11661-006-0052-8 ↗
25. Preparation and characterization of aluminium-titanium carbide (Al-TiC) composite using powder metallurgy10.1016/j.matpr.2020.07.155 ↗
26. Enhancing thermal and mechanical response of aluminum using nanolength scale TiC ceramic reinforcement10.1016/j.ceramint.2018.02.135 ↗
27. Evaluation of mechanical and wear properties of aluminium-Al2O3 composite material
28. Chapter 7—Coatings10.1016/B978-075065924-6/50008-8 ↗
29. HVOF thermal sprayed coatings on aluminium alloys and aluminium matrix composites10.1016/j.surfcoat.2005.02.124 ↗
30. Heat treatment of AA 6082 T6 aluminum alloy coated with thin Al2O3 layer by fluidized bed10.1007/s00170-018-1752-0 ↗
31. Effects of evaluated temperature on tribological behaviors of micro-arc oxidated 2219 aluminum alloy and their field application10.1007/s00170-017-0919-4 ↗
32. Mechanical behaviour of black anodic films on 7175 aluminium alloy for space applications10.1016/S0026-0576(10)80037-6 ↗
33. Effects of pore parameters on performance of anodic film on 2024 aluminum alloy10.1016/j.matchemphys.2019.04.008 ↗
34. Essential anti-corrosive behavior of anodized Al alloy by applied current density10.1016/j.apsusc.2019.03.155 ↗
35. Investigation of particle size and amount of alumina on microstructure and mechanical properties of Al matrix composite made by powder metallurgy10.1016/j.msea.2009.09.034 ↗
36. Experimental investigation of amount of nano-Al2O3 on mechanical properties of Al-based nano-composites fabricated by powder metallurgy (PM)10.1063/1.5008243 ↗
37. Sol-gel protective coatings for metals10.1007/978-3-319-32101-1_70 ↗
38. Applications of hybrid organic-inorganic nanocomposites10.1039/b509097k ↗
39. Sol-gel films: corrosion protection coating for aluminium alloy10.5772/intechopen.79712 ↗
40. Novel approaches for preparation of nanoparticles10.1016/B978-0-323-46142-9.00001-3 ↗
41. ORMOSIL-ZrO2 hybrid nanocomposites and coatings on aluminium alloys for corrosion resistance; A sol-gel approach10.1039/C7NJ05174C ↗
42. Mechanical and welding properties of A6082-SiC-ZrO2 hybrid composite fabricated by stir and squeeze casting10.1016/j.matpr.2018.06.398 ↗
43. Improving the wear properties of aluminum 6082 alloy by surface compositing with Zro2 ceramic particles via friction stir processing10.13005/msri/150108 ↗
44. Mechanical and tribological behaviour of Al-ZrO2 composites: A review10.1007/978-981-13-6469-3_20 ↗
45. Hardness and wear resistance of ZrO2 nano particle reinforced al nanocomposites produced by powder metallurgy10.1016/j.mspro.2015.06.043 ↗
46. Wear and mechanical properties of Al6061/SiC/B4C hybrid composites produced with powder metallurgy10.1016/j.jmrt.2019.09.002 ↗
47. Fabrication of Al–SiC–B4C metal matrix composite by powder metallurgy technique and evaluating mechanical properties10.1016/j.pisc.2016.04.096 ↗
48. Synthesis and characterization of nano graphene and ZrO2 reinforced Al 6061 metal matrix composites10.1016/j.jmrt.2020.05.013 ↗
49. Study of mechanical and tribological behaviour of Al/SiC/ZrO2 hybrid composites fabricated through powder metallurgy technique10.1088/2053-1591/aa7b5f ↗
50. Investigation on microstructural and mechanical properties of B4C-aluminum matrix composites prepared by microwave sintering10.1016/j.jmrt.2015.02.005 ↗