Investigation of Electrolytic Condition on Abrasive-Free Electrochemical Mechanical Polishing of 4H-SiC Using Ce Thin Film
Source abstract
Abstract
Silicon carbide (SiC) is a promising material for power electronic devices; however, the fabrication of low-cost and high-quality single-crystal SiC wafers with a smooth surface remains difficult, due to its high mechanical hardness and chemical stability. We report an abrasive-free electrochemical mechanical polishing (AF-ECMP) for a SiC surface using Ce film deposited on a polishing pad. The SiC surface is oxidized by electrolysis between the SiC (anode) and the polishing plate (cathode), the resulting oxide is then removed by interaction with the Ce film. The excess oxide produces a rough surface during continuous electrolysis on the SiC surface. The periodic electrolysis improves the surface quality, and electrolysis conditions such as duty ratio, duty cycle, and applied voltage are optimized. The abrasive ECMP, using CeO 2 particles, broadens the initial scratches on SiC, whereas no scratch broadening is observed by the AF-ECMP. Despite a lower material removal rate (MRR) than the abrasive ECMP, the surface roughness was improved by the AF-ECMP with less polishing time. AF-ECMP produces an atomically smooth SiC surface with a roughness of ∼0.5 nm Ra , which is promising for low-cost and environment-friendly finishing process for SiC.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Hamada · IEEE Trans. Electron Devices · 2015 · 62 · 27810.1109/TED.2014.2359240 ↗
2. Hardin · Mater. Manuf. Process. · 2004 · 19 · 35510.1081/AMP-120029960 ↗
3. Agarwal · Int. J. Mach. Tools Manuf · 2008 · 48 · 69810.1016/j.ijmachtools.2007.10.013 ↗
4. Shi · Appl. Surf. Sci. · 2014 · 307 · 41410.1016/j.apsusc.2014.04.048 ↗
5. Zhou · Appl. Surf. Sci. · 2014 · 316 · 64310.1016/j.apsusc.2014.08.011 ↗
6. Saddow · J. Electron. Mater. · 2001 · 30 · 22810.1007/s11664-001-0021-3 ↗
7. Neslen · J. Electron. Mater. · 2001 · 30 · 127110.1007/s11664-001-0111-2 ↗
8. Lee · IEEE Trans. Electron Devices · 2012 · 59 · 69410.1109/TED.2011.2181391 ↗
9. Yamamura · CIRP Ann. · 2011 · 60 · 57110.1016/j.cirp.2011.03.072 ↗
10. Deng · Appl. Surf. Sci. · 2018 · 434 · 4010.1016/j.apsusc.2017.10.159 ↗
11. Liu · J. Electrochem. Soc. · 2006 · 153 · C37710.1149/1.2186180 ↗
12. Murata · Electrochem. Commun. · 2018 · 97 · 11010.1016/j.elecom.2018.11.006 ↗
13. Li · J. Electron. Mater. · 2004 · 33 · 48110.1007/s11664-004-0207-6 ↗
14. Gao · ECS J. Solid State Sci. Technol. · 2019 · 8 · P67710.1149/2.0031911jss ↗
15. Deng · Electrochem. Commun. · 2015 · 52 · 510.1016/j.elecom.2015.01.002 ↗
16. Murata · Int. J. Mach. Tools Manuf · 2017 · 114 · 110.1016/j.ijmachtools.2016.11.007 ↗
17. Kim · J. Rare Earths · 2011 · 29 · 107510.1016/S1002-0721(10)60601-1 ↗
18. Murata · J. Mater. Process. Technol. · 2019 · 265 · 5610.1016/j.jmatprotec.2018.10.009 ↗
19. Isohashi · Appl. Phys. Lett. · 2017 · 11010.1063/1.4983206 ↗
20. Sano · ECS J. Solid State Sci. Technol. · 2013 · 2 · N302810.1149/2.007308jss ↗
21. Okamoto · Jpn. J. Appl. Phys. · 2012 · 5110.1143/JJAP.51.046501 ↗
22. Hara · J. Electron. Mater. · 2006 · 35 · L1110.1007/s11664-006-0218-6 ↗
23. Murata · Electrochim. Acta · 2015 · 171 · 8910.1016/j.electacta.2015.04.166 ↗
24. Sadakuni · Jpn. J. Appl. Phys. · 2013 · 5210.7567/JJAP.52.036504 ↗
25. Liu · Langmuir · 2019 · 35 · 773510.1021/acs.langmuir.9b00790 ↗
26. Horikiri · Jpn. J. Appl. Phys. · 2018 · 57 · 8650210.7567/JJAP.57.086502 ↗
27. Zhuang · Mater. Sci. Eng. R Reports · 2005 · 48 · 110.1016/j.mser.2004.11.002 ↗