journal article·2025-03

Effective vibration sensing nanocomposite sheets based on Poly(vinylidene fluoride-co-hexafluoropropylene) matrix and SrTiO3 nanoparticles grafted with 2,2,2-trifluoroethyl methacrylate nanoscale coating

Premysl Fajkus, Marketa Ilcikova, Danila Gorgol, Josef Osicka, Tomas Plachy, Michal Urbanek, Milan Kracalik, Miroslav Mrlik

Publisher page

Abstract

Structural, thermal and mechanical properties of poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF-HFP))/strontium titanate (ST) nanocomposites with different weight ratios were investigated in this research. ST particles were modified for the first time by poly(2,2,2-Trifluoroethyl methacrylate) (PTFEMA) nanoscale coating. The successful polymerization from the surface using atom transfer radical polymerization (ATRP) approach was investigated using 1H nuclear magnetic resonance and gel permeation chromatography, by means of monomer conversion and molecular weight/polydispersity index, respectively. The presence of the nanometer thin PTFEMA coating was confirmed using transmission electron microscopy. Scanning electron microscope with energy-dispersive spectroscopy was used for evaluation of the individual elements such as carbon, fluorine and oxygen. Fabricated nanocomposites were thoroughly characterized using Fourier transform infrared spectroscopy to show, that even a small amount of ST or ST-PTFEMA decreased the amount of β-phase content compared to the pristine polymer. However, with higher filler amounts, β-phase remained same or slightly decreased. Mechanical properties and glass transition temperature (Tg) were determined by dynamic mechanical analysis. For the pure polymer at 1 Hz the Tg was −35.1 °C, while for nanocomposites Tg were within the range of −35.9 to −35.0 °C for those with ST and −37.1 to −35.8 °C for those with ST-PTFEMA, showing the reinforcement of the fabricated nanocomposites. The tensile test showed that addition of 5 wt % of ST-PTFEMA allowed nanocomposite to keep almost same strain at break (940 ± 40 %) value as pristine P(VDF-HFP) (990 ± 30 %), while nanocomposite with 5 wt % of neat ST value decreased to (640 ± 20 %). Furthermore, strain at break value of nanocomposites with increasing content (10 and 20 wt%) of neat ST significantly dropped, while those with ST-PTFEMA analogues were able to keep higher values even with increasing content of those particles, thus those are suitable for further treatment techniques such as additional stretching. Finally, the vibration sensing activity of the nanocomposites were measured, where highest d33 was achieved by nanocomposite with 5 wt% ST-PTFEMA 21.4 ± 1.3 pC/N which was significantly higher than d33 for neat PVDF 14.4 ± 1.4 pC/N as well as corresponding non-modified analogues showing 18.6 ± 1.9 pC/N.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Analytical Chemistry and Sensors · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Tichý · 2010
2. BaTiO3-based piezoelectrics10.1063/1.4990046 ↗
3. The PZT system
4. A review of ceramic, polymer and composite piezoelectric materials
5. Boron nitride nanotube-aligned electrospun PVDF nanofiber-based composite films applicable to wearable piezoelectric sensors10.1021/acsanm.4c01296 ↗
6. A review on PVDF nanofibers in textiles for flexible piezoelectric sensors10.1021/acsanm.2c04916 ↗
7. Green luminescent Cs4PbBr6@PVDF polymer nanocomposite-based hybrid nanogenerator for self-powered photosensor
8. High-performance flexible nanogenerators based on piezoelectric hBN- induced polyvinylidene fluoride nanofibers
9. Piezoelectric performance of electrospun PVDF and PVDF composite fibers: a review and machine learning-based analysis
10. Piezoelectric core-shell fibrous scaffolds of PVDF-ZnO/PCL for bone regeneration
11. Improved piezoelectricity of PVDF-HFP/carbon black composite films
12. Electrospun ZnSnO3/PVDF-HFP nanofibrous triboelectric films for efficient mechanical energy harvesting10.1007/s42765-023-00295-3 ↗
13. Montmorillonite/PVDF-HFP-based energy conversion and storage films with enhanced piezoelectric and dielectric properties10.1016/j.compscitech.2018.10.009 ↗
14. Review on composite polymer electrolyte using PVDF-HFP for solid-state lithium-ion battery
15. Transparent flexible graphene quantum dot-(PVDF-HFP) piezoelectric nanogenerator10.1016/j.matlet.2021.129493 ↗
16. 2D MoO3/PVDF–HFP nanocomposites for flexible piezoelectric nanogenerator and wireless mechanosensor applications10.1021/acsanm.3c05013 ↗
17. Tribo-piezoelectric hybrid nanogenerators based on ZnO nanorods and CsPbBr 3 nanoparticle/PVDF-HFP films for self-powered photodetectors10.1021/acsanm.4c02017 ↗
18. Hierarchical PVDF-HFP/ZnO composite nanofiber–based highly sensitive piezoelectric sensor for wireless workout monitoring
19. Effect of crystalline phase, orientation and temperature on the dielectric properties of poly (vinylidene fluoride) (PVDF)10.1023/A:1004689205706 ↗
20. Energy harvesting from a thin polymeric film based on PVDF-HFP and PMMA blend
21. Crystalline polymorphism in poly(vinylidenefluoride) membranes10.1016/j.progpolymsci.2015.07.007 ↗
22. The effect of PVP on thermal, mechanical, and dielectric properties in PVDF-HFP/PVP thin film10.3390/coatings12091241 ↗
23. Reduction in piezoelectric voltage generation for the cerium doped nickel ferrite nanoparticles filled PVDF-HFP nanocomposites10.1016/j.rinp.2019.02.066 ↗
24. Preparing carbon black/graphene/PVDF-HFP hybrid composite films of high piezoelectricity for energy harvesting technology10.1016/j.compositesa.2019.03.031 ↗
25. Smart and robust electrospun fabrics of piezoelectric polymer nanocomposite for self-powering electronic textiles10.1016/j.matdes.2019.108176 ↗
26. Preparation of efficient piezoelectric PVDF–HFP/Ni composite films by high electric field poling
27. Influences of poling temperature and elongation ratio on PVDF-HFP piezoelectric films
28. Tunable dielectric properties of poly(vinylidenefluoride-co-hexafluoropropylene) films with embedded fluorinated barium strontium titanate nanoparticles10.1038/s41598-018-22442-2 ↗
29. Lead free piezoelectric materials
30. Incorporation of barium titanate nanoparticles in piezoelectric PVDF membrane10.1016/j.memsci.2021.119861 ↗
31. Stretchable quaternary phasic PVDF-HFP nanocomposite films containing graphene-titania-SrTiO3 for mechanical energy harvesting
32. Effect of nano-sized poly(butyl acrylate) layer grafted from graphene oxide sheets on the compatibility and beta-phase development of poly(vinylidene fluoride) and their vibration sensing performance10.3390/ijms23105777 ↗
33. Improved piezoelectric properties through manganese-doping in phase coexistence region in lead strontium zirconate titanate (PSZT) thin films
34. Effect of Zr substitution on electrical properties of Ba0.90Sr0.10Ti1−xZrxO3 (0 ≤ x ≤ 0.20) ceramics10.1016/j.mseb.2022.116200 ↗
35. D. Maurya, A. Kumar, V. Petkov, J.E. Mahaney, R.S. Katiyar, S. Priya. Local Structure and Piezoelectric Instability in Lead-free (1 −.
36. O 3 (A = Sr, Ca, Ba) solid solutions
37. Modulation of electric dipoles inside electrospun BaTiO3@TiO2 core-shell nanofibers for enhanced piezo-photocatalytic degradation of organic pollutants10.1016/j.nanoen.2021.106841 ↗
38. ZnO@Carbon dot nanoparticles stimulating the antibacterial activity of polyvinylidene fluoride–hexafluoropropylene with a higher electroactive phase for multifunctional devices10.1021/acsami.2c18859 ↗
39. Influence of PMMA brushes grafted from GO on rheological properties of PMMA/SAN immiscible blend in shear and elongation flow10.1016/j.polymer.2023.126015 ↗
40. Lead-free AgNbO3/poly(vinylidene fluoride‐hexafluoropropylene) antiferroelectric nanocomposite for high energy density capacitor applications
41. Comparative study of PVDF sheets and their sensitivity to mechanical vibrations10.3390/nano11071637 ↗
42. Influence of the β-phase content and degree of crystallinity on the piezo- and ferroelectric properties of poly(vinylidene fluoride)
43. Graphene oxide reduction during surface-initiated atom transfer radical polymerization of glycidyl methacrylate10.1016/j.cej.2015.08.013 ↗
44. UV–LED driven photodegradation of organic dye and antibiotic using strontium titanate nanostructures
45. Enhanced dielectric properties of PVDF-HFP/BaTiO 3 -nanowire composites induced by interfacial polarization and wire-shape
46. Effect of structure of polymers grafted from graphene oxide on the compatibility of particles with a silicone-based environment and the stimuli-responsive capabilities of their composites10.3390/nano10030591 ↗
47. The effect of short polystyrene brushes grafted from graphene oxide on the behavior of miscible PMMA/SAN blends10.1016/j.polymer.2020.123088 ↗
48. Amplified dielectric properties of PVDF–HFP/SrTiO 3 nanocomposites for a flexible film capacitor
49. Carbon nanofiber/poly(vinylidene fluoride-hexafluoro propylene) composite films
50. Temperature and frequency‐dependent creep and recovery studies on PVDF‐HFP/organo‐modified layered double hydroxides nanocomposites
51. Synthesis of photoactuating acrylic thermoplastic elastomers containing diblock copolymer-grafted carbon nanotubes10.1021/mz500444m ↗
52. Controllably coated graphene oxide particles with enhanced compatibility with poly(ethylene-co-propylene) thermoplastic elastomer for excellent photo-mechanical actuation capability10.1016/j.reactfunctpolym.2020.104487 ↗
53. Coupling of fluorescent and piezoelectric bifunctions in PVDF-HFP microporous film with highly dispersed carbon dots10.1007/s10854-024-12829-5 ↗
54. ZnO@Carbon dot nanoparticles stimulating the antibacterial activity of polyvinylidene fluoride–hexafluoropropylene with a higher electroactive phase for multifunctional devices10.1021/acsami.2c18859 ↗
55. Poly (vinylidine fluoride) (PVDF)/Potassium Sodium Niobate (KNN) nanorods based flexible nanocomposite film: influence of KNN concentration in the performance of nanogenerator10.1016/j.orgel.2019.105547 ↗
56. A high performance nanocellulose-PVDF based piezoelectric nanogenerator based on the highly active CNF@ZnO via electrospinning technology10.1016/j.nanoen.2024.109741 ↗
57. Characterizing piezoelectric properties of PVDF film under extreme loadings
58. Stretchable quaternary phasic PVDF-HFP nanocomposite films containing graphene-titania-SrTiO3 for mechanical energy harvesting10.1007/s42247-018-0007-z ↗