Enhancing conductivity on p-type (Bi,Sb)2Te3 surface by introducing slip trace
Source abstract
Abstract
Structural modification can effectively tune and optimize the thermoelectric properties of Bi2Te3-based alloys. Herein, we present an innovative and controllable approach to enhance the conductivity of the Bi2Te3-based alloy by introducing slip traces. The effect of slip traces on the conductivity of the Bi2Te3-based alloy was comprehensively investigated using advanced techniques such as Electron Backscatter Diffraction (EBSD) and conductive Atomic Force Microscopy (c-AFM). The results revealed that slip traces were readily formed in (Bi,Sb)2Te3 grains when a load was applied perpendicular to the prismatic plane. The Point Discharge Effect (PDE) was found to promote carriers moving towards the slip traces, leading to the accumulation of positively charged holes. As a result of this process, a higher current intensity was detected at the slip traces. This innovative strategy offers a convenient and effective way to fabricate high-conductivity thermoelectric materials and thus will inspire new technological possibilities for high-performance thermoelectric devices.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Rowe · 2006
2. Structure of the (0001) basal twin boundary in Bi2Te310.1063/1.3457902 ↗
3. Syntheses and thermoelectric properties of Bi2Te3∕Sb2Te3 bulk nanocomposites with laminated nanostructure10.1063/1.2900960 ↗
4. ERRATUM: the use of semiconductors in thermoelectric refrigeration10.1088/0508-3443/5/11/303 ↗
5. Holey and unholey semiconductors10.1126/science.283.5403.804 ↗
6. CsBi4Te6: a high-performance thermoelectric material for low-temperature applications10.1126/science.287.5455.1024 ↗
7. Advanced thermoelectric design: from materials and structures to devices10.1021/acs.chemrev.0c00026 ↗
8. Enhanced thermoelectric performance of nanostructured Bi2Te3 through significant phonon scattering10.1021/acsami.5b07596 ↗
9. Dislocation nets in bismuth and antimony tellurides10.1080/14786436008235871 ↗
10. Gliding dislocations in Bi2Te3 materials10.1002/pssa.200824224 ↗
11. Improving deformability of Sb2Te3 layered material by dislocation climb at anti-phase boundary10.1016/j.scriptamat.2017.03.010 ↗
12. Enhanced thermoelectric performance of Bi-Sb-Te/Sb2O3 nanocomposites by energy filtering effect10.1039/C8TA08238C ↗
13. Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics10.1126/science.aaa4166 ↗
14. HighPressure torsion, a new processing route for thermoelectrics of high ZTs by means of severe plastic deformation10.1016/j.actamat.2011.12.023 ↗
15. A semianalytical sachs model for the flow stress of a magnesium alloy10.1007/BF02586147 ↗
16. EBSD analysis of deformation modes in Mg-3Al-1Zn10.1016/j.scriptamat.2006.07.036 ↗
17. Compatibility of deformation in two-phase Ti–Al alloys: dependence on microstructure and orientation relationships10.1007/BF02670762 ↗
18. Assessment of geometrically necessary dislocation levels derived by 3D EBSD10.1016/j.actamat.2015.06.051 ↗
19. Enhanced thermoelectric figure of merit of CoSb3 via large-defect scattering10.1063/1.1687997 ↗
20. Rationally designing high-performance bulk thermoelectric materials10.1021/acs.chemrev.6b00255 ↗
21. In situ monitoring of the “point discharge” induced antibacterial process by the onsite formation of a Raman probe10.1021/acs.analchem.9b05265 ↗
22. Increasing the migration and separation efficiencies of photogenerated carriers in CQDs/BiOCl through the point discharge effect
23. Thermoelectric materials: new approaches to an old problem10.1063/1.881752 ↗
24. Comprehensive insight into p -type Bi 2 Te 3 -based thermoelectrics near room temperature10.1021/acsami.2c13109 ↗
25. Clarification of electronic and thermal transport properties of Pb-, Ag-, and CuDoped p-type Bi0.52Sb1.48Te310.1016/j.jallcom.2018.09.099 ↗
26. Enhancement of Seebeck coefficient and figure of merit of gadoped single crystal p-BiSbTe310.1063/1.4731511 ↗
27. Effect of annealing on microstructure and thermoelectric properties of HotExtruded Bi-Sb-Te bulk materials