journal article·2021-03-01

Surface Passivation of ITO on Heterojunction Solar Cells with Enhanced Cell Performance and Module Reliability

Guanlin Du, Yanhui Bai, Jin Huang, Juan Zhang, Jilei Wang, Yinyue Lin, Linfeng Lu, Liyou Yang, Shaojuan Bao, Zhongxi Huang, Xiaoyuan Chen, Min Yin, Dongdong Li

Publisher page

Abstract

The indium tin oxide (ITO) thin film plays an important role in the silicon heterojunction (SHJ) solar cells, which acts as not only a carrier transport layer in vertical and lateral directions but an anti-reflection layer as well. Thickness reduction of the expensive ITO is an efficient strategy to reduce the cost of SHJ solar cells. In this work, the simulated antireflection effects of several dielectric capping layers demonstrate that Al2O3 and SiO2 are the suitable candidates for both of the SHJ solar cell and module. Hall effect measurements show that the SiO2 layer is able to passivate the ITO surface and improve the mobility and conductivity of the ITO film, which is beneficial to further reduce the thickness of ITO films. It is also found that the SiO2 capping layer can significantly enhance the adhesion strength between the solar cell and the encapsulating polymer film by 26% in the SHJ module. The improved adhesion strength is attributed to the higher surface energy of SiO2 than ITO, according to the liquid-solid contact angle measurements. These results show that the SiO2 capping layer can not only reduce the consumption of ITO thin films, but also increase the reliability of SHJ module.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Passivating contacts for crystalline silicon solar cells: from concepts and materials to prospects10.1109/JPHOTOV.2018.2797106 ↗
2. Full-Area Passivating Contacts with High and Low Thermal Budgets: Solutions for High Efficiency c-Si Solar Cells
3. Impact of carrier recombination on fill factor for large area heterojunction crystalline silicon solar cell with 25.1% efficiency10.1063/1.4937224 ↗
4. Refractive index of alkali halides and its wavelength and temperature derivatives10.1063/1.555536 ↗
5. Optimization of ITO layers for applications in a-Si/c-Si heterojunction solar cells10.1016/S0040-6090(02)01143-4 ↗
6. S. cells, Silicon heterojunction rear emitter solar cells: Less restrictions on the optoelectrical properties of front side TCOs10.1016/j.solmat.2013.11.029 ↗
7. ITO/SiOx: H stacks for silicon heterojunction solar cells10.1016/j.solmat.2016.05.024 ↗
8. Lateral transport in silicon solar cells10.1063/1.5139416 ↗
9. Contact resistance - Its measurement and relative importance to power loss in a solar cell10.1109/T-ED.1984.21584 ↗
10. High-efficiency silicon heterojunction solar cells: A review10.1515/green-2011-0018 ↗
11. Infrared light management in high-efficiency silicon heterojunction and rear-passivated solar cells10.1063/1.4772975 ↗
12. Free carrier absorption in silicon10.1109/JSSC.1978.1051012 ↗
13. High-performance ZnO nanowire field effect transistors10.1063/1.2357013 ↗
14. Quasi-one-dimensional metal oxide materials-Synthesis, properties and applications10.1016/j.mser.2006.04.002 ↗
15. A new method of preparing highly conductive ultra-thin indium tin oxide for plasmonic-enhanced thin film solar photovoltaic devices10.1016/j.solmat.2016.01.028 ↗
16. Damp-Heat-Stable, High-Efficiency, Industrial-Size Silicon Heterojunction Solar Cells10.1016/j.joule.2020.03.003 ↗
17. Design and fabrication of a SiOx/ITO double-layer anti-reflective coating for heterojunction silicon solar cells10.1016/j.solmat.2013.05.044 ↗
18. Current Losses At the Front of Silicon Heterojunction Solar Cells10.1109/JPHOTOV.2011.2174967 ↗
19. Sunsolve
20. Illumination for computer generated pictures10.1145/360825.360839 ↗
21. Tri-layer antireflection coatings (SiO2/SiO2–TiO2/TiO2) for silicon solar cells using a sol–gel technique10.1016/j.solmat.2006.04.001 ↗
22. Palik · 1998
23. Substrate dependence on the optical properties of Al2O3 films grown by atomic layer deposition10.1063/1.120454 ↗
24. Determination of the optical constants of MgF 2 and ZnS from spectrophotometric measurements and the classical oscillator method10.1364/AO.27.002549 ↗
25. Power losses in the front transparent conductive oxide layer of silicon heterojunction solar cells: design guide for single-junction and four-terminal tandem applications10.1109/JPHOTOV.2019.2954765 ↗
26. Temperature dependence of the band-band absorption coefficient in crystalline silicon from photoluminescence10.1063/1.4862912 ↗
27. Application of silicon oxide on high efficiency monocrystalline silicon PERC solar cells10.3390/en12061168 ↗
28. Effect of front TCO on the performance of rear-junction silicon heterojunction solar cells: Insights from simulations and experiments10.1016/j.solmat.2019.01.047 ↗
29. Impact of Epitaxial Growth at the Heterointerface of a-Si: H∕c-Si Solar Cells10.1063/1.2426900 ↗
30. Biomimetic parabola-shaped AZO subwavelength grating structures for efficient antireflection of Si-based solar cells10.1016/j.solmat.2011.03.026 ↗
31. Improved opto-electronic properties of silicon heterojunction solar cells with SiOx/Tungsten-doped indium oxide double anti-reflective coatings10.7567/JJAP.56.08MB09 ↗
32. Reduction of series resistance in organic photovoltaic using low sheet resistance of ITO electrode10.1149/1.3055339 ↗
33. Analysis of lateral transport through the inversion layer in amorphous silicon/crystalline silicon heterojunction solar cells10.1063/1.4818709 ↗
34. Paths for maximal light incoupling and excellent electrical performances in silicon heterojunction solar cells10.1109 / PVSC40753.2019.8980543 ↗
35. Potential induced degradation in high-efficiency bifacial solar cells10.1109 / IRPS.2016.7574634 ↗
36. Damp heat Induced degradation of silicon heterojunction solar cells with Cu-plated contacts10.1109/JPHOTOV.2019.2941693 ↗
37. Formation of silicon structures by plasma‐activated wafer bonding10.1149/1.1393591 ↗
38. A new approach to surface energy characterization for adhesive performance prediction10.1002/sia.740030405 ↗
39. Effect of substrate surface energy on transcrystalline growth and its effect on interfacial adhesion of semicrystalline polymers10.1021/ma034597p ↗
40. Dispersion-polar surface tension properties of organic solids10.1080/0021846708544582 ↗
41. Roughness and fiber fraction dominated wetting of electrospun fiber-based porous meshes10.3390/polym11010034 ↗