journal article·2021-02-01Open access

Adsorption Mechanism of Potassium Oleate on Cobalt Surface Based on Cobalt Interconnection CMP: A Combined Experimental and DFT Investigation

Xiaoqin Sun, Tengda Ma, Da Yin, Baimei Tan, Fan Yang, Mengrui Liu, Pengcheng Gao, Shihao Zhang, Yazhen Wang, Yangang He

Abstract

Potassium oleate (PO) is a promising corrosion inhibitor to replace benzotriazole (BTA) for cobalt (Co) wiring in the integrated circuit (IC). The adsorption characteristics of different cobalt surfaces were characterized by the contact angle measurement. The formation of passive Co–PO film and the corrosion inhibitor efficiency of PO to cobalt was analyzed by electrochemistry and electrochemical impedance spectroscopy (EIS), and the change of chemical elements on the cobalt surface was analyzed by X-ray photoelectron spectroscopy (XPS). Furthermore, quantum chemical calculation and molecular dynamics simulation based on density functional theory (DFT) further revealed the adsorption mechanism of PO and cobalt at the molecular level. The results showed that Co–PO passivation film formed on the cobalt surface, besides, 2 mM PO has achieved the best inhibition efficiency on cobalt surface.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Corrosion Behavior and Inhibition · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Cobalt CMP development for 7nm logic device10.1149/07705.0093ecst ↗
2. Effect of amine based chelating agent and H2O2 on cobalt contact chemical mechanical polishing10.1149/2.0271808jss ↗
3. Synergetic effect of H2O2 and glycine on Cobalt CMP in weakly alkaline slurry10.1016/j.mee.2014.02.002 ↗
4. Atomistic mechanisms of Cu CMP in aqueous H2O2: molecular dynamics simulations using ReaxFF reactive force field10.1016/j.commatsci.2018.09.022 ↗
5. Role of dispersant agent on scratch reduction during copper barrier chemical mechanical planarization10.1149/2.0101806jss ↗
6. Chemical interactions and mechanisms of different ph regulators on copper and cobalt removal rate of copper film CMP for GLSI10.1149/2.0101902jss ↗
7. Sodium hypochlorite as an oxidizing agent in silica based ruthenium chemical mechanical planarization slurry10.1016/j.mee.2017.06.006 ↗
8. Synergistic effect of glycine and BTA on step height reduction efficiency after copper CMP in weakly alkaline slurry10.1149/2.0291612jss ↗
9. Formation of cobalt-BTA complexes and their removal from various surfaces relevant to cobalt interconnect applications10.1149/2.0011905jss ↗
10. Post-CMP cleaning solutions for the removal of organic contaminants with reduced galvanic corrosion at copper/cobalt interface for advanced Cu interconnect applications10.1149/2.0011908jss ↗
11. Investigation of Co surface reaction by in situ measurement for chemical mechanical planarization and post-chemical mechanical planarization cleaning10.7567/JJAP.57.07MD02 ↗
12. Characterization of 1, 2, 4-triazole as corrosion inhibitor for chemical mechanical polishing of cobalt in H2O2 based acid slurry10.1149/2.0131905jss ↗
13. Inhibition effect of TT-LYK on Cu corrosion and galvanic corrosion between Cu and Co during CMP in alkaline slurry10.1149/2.0181908jss ↗
14. Chemical mechanical polishing of chemical vapor deposited Co films with minimal corrosion in the Cu/Co/Mn/SiCOH patterned structures10.1149/2.0171705jss ↗
15. The effect of glycine and benzotriazole on corrosion and polishing properties of cobalt in acid slurry10.1149/2.036209jes ↗
16. Potassium oleate as a dissolution and corrosion inhibitor during chemical mechanical planarization of chemical vapor deposited Co films for interconnect applications10.1149/2.0251712jss ↗
17. Ammonium persulfate and potassium oleate containing silica dispersions for chemical mechanical polishing for cobalt interconnect applications10.1149/2.0021905jss ↗
18. A novel and high-efficiency inhibitor of 5-(4-methoxyphenyl)-3h-1,2-dithiole-3-thione for copper corrosion inhibition in sulfuric acid at different temperatures10.1016/j.molliq.2018.09.095 ↗
19. Atomistic insights into Cu chemical mechanical polishing mechanism in aqueous hydrogen peroxide and glycine: ReaxFF reactive molecular dynamics simulations10.1021/acs.jpcc.9b08466 ↗
20. Theoretical and electrochemical analysis on inhibition effect of benzotriazole and 1,2,4-triazole on cobalt surface10.1016/j.colsurfa.2020.124516 ↗
21. Study on the film forming mechanism, corrosion inhibition effect and synergistic action of two different inhibitors on copper surface chemical mechanical polishing for GLSI10.1016/j.apsusc.2019.144507 ↗
22. In situ electrochemical evaluation of post-CMP cleaning reactions for cobalt and copper films under brushing conditions10.1149/2.0241905jss ↗
23. Corrosion- and wear-resistant composite film of graphene and mussel adhesive proteins on carbon steel10.1016/j.corsci.2019.108351 ↗
24. Study on acting laws of water-soluble corrosion inhibitor CI-120410.3969/j.issn.1673-5005.2014.03.018 ↗
25. Study on effective methods and mechanism of inhibiting cobalt removal rate in chemical mechanical polishing of GLSI low-tech node copper film10.1149/2.0271910jss ↗
26. Effect of diethylenetriamine pentaacetate pentapotassium on chemical mechanical polishing of cobalt in H2O2 based slurry10.1149/2.0291905jss ↗
27. Citric acid as a complexing agent in chemical mechanical polishing slurries for cobalt films for interconnect applications10.1149/2.0111709jss ↗
28. Development of organo-dispersible graphene oxide via pseudo-surface modification for thermally conductive green polymer composites10.1021/acsomega.8b02478 ↗
29. Water/ethanol Complexation induced solubility variation of Hexaquocobalt(II) Bis (p-toluenesulfonate) and Hexaquonickel(II) Bis (p-toluenesulfonate)10.1016/j.molliq.2016.09.094 ↗
30. Adsorption of gold cyanide on quartz10.1016/j.colsurfa.2020.124514 ↗
31. Modelling carbyne C-12-ring calcium decorated for hydrogen storage10.31349/RevMexFis.64.634 ↗
32. Hydrogen storage on lithium decorated zeolite templated carbon, DFT study10.1016/j.ijhydene.2017.10.098 ↗
33. Analysis of adsorption properties of typical partial discharge gases on Ni-SWCNTs using density functional theory10.1016/j.apsusc.2016.04.048 ↗
34. Anticorrosive effects of some thiophene derivatives against the corrosion of iron: a computational study10.3389/fchem.2018.00155 ↗
35. Toward understanding the anticorrosive mechanism of some thiourea derivatives for carbon steel corrosion: A combined DFT and molecular dynamics investigation10.1016/j.jcis.2017.07.082 ↗
36. Multidimensional insights into the corrosion inhibition of 3,3dithiodipropionic acid on Q235 steel in H2SO4 medium: a combined experimental and in silico investigation10.1016/j.jcis.2020.03.001 ↗
37. Correlation between the molecular structure and the corrosion inhibiting effect of some pyrophthalone compounds10.1016/S0301-0104(02)00408-1 ↗
38. Density functional theory study of adsorption of benzotriazole on Cu2O surfaces10.1021/acs.jpcc.5b01677 ↗