Influence of Nano-Hybrid Reinforcements on the Improvement Strength, Thermal Expansion and Wear Properties of Cu–SiC–Fly Ash Nanocomposites Prepared by Powder Metallurgy
Source abstract
Abstract
In this study, Cu-matrix hybrid nanocomposites with varying amounts of silicon carbide (SiC) and fly ash nano particles were created using the powder metallurgy process. To describe the microstructure of produced powders, X-ray diffraction (XRD) technique and transmission electron microscopy (TEM) were used. The powders were compressed and fired for one hour in inert gas at three different temperatures up to 850 °C. Moreover, the sintered samples’ microstructure, mechanical, wear, thermal, and electrical characteristics were examined. According to the results, particle sizes were successfully decreased up to 51.2 nm by adding SiC and fly ash ceramics. The values of density, coefficient thermal expansion (CTE) and electrical conductivity of the nanocomposite sample containing 16 vol% of ceramics decreased until reached 92.3%, 9.5 × 10−6/°C and 7.44 × 106 S m−1, respectively. Additionally, as compared to Cu matrix (CSF0), the nanocomposite with the highest ceramics volume percentage (CSF8) significantly improved in terms of ultimate strength, microhardness, Young’s modulus, and wear rate by 47.8, 88, 23.5and 27.3%, respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Preparation of silicon bronze-based hybrid nanocomposites with excellent mechanical, electrical, and wear properties by adding the Ti3AlC2 MAX phase and granite via powder metallurgy10.1007/s12633-022-02165-w ↗
2. Microstructure and properties of Cu-TiNi composites prepared by vacuum hot pressing10.1016/j.jallcom.2021.162729 ↗
3. In-situ fabrication of nano-sized TiO2 reinforced Cu matrix composites with well-balanced mechanical properties and electrical conductivity10.1016/j.powtec.2017.08.019 ↗
4. Improved mechanical properties of Cu8Ni4Sn alloy as functionally graded composites with preserving its thermal and electrical properties10.1016/j.matchemphys.2022.126778 ↗
5. Mechanical properties, and microstructure characterization of well-dispersed carbon nanotubes reinforced copper matrix composites10.1016/j.jallcom.2017.08.131 ↗
6. Characterization and performance evaluation of Cu-based/TiO2 nano composites10.1038/s41598-022-10616-y ↗
7. Hardness, wear and friction characteristics of nanostructured Cu-SiC nanocomposites fabricated by powder metallurgy route10.1016/j.mtcomm.2018.11.001 ↗
8. Development and investigation of Cu/SiC nano-composite coatings via various parameters of DC electrodeposition10.1016/j.triboint.2019.01.034 ↗
9. The effect of sintering temperature on some properties of Cu–SiC composite10.1016/j.jallcom.2011.02.170 ↗
10. Deformation mechanism and enhanced properties of Cu–TiB2 composites evaluated by the in situ tensile test and microstructure characterization10.1016/j.jallcom.2020.156555 ↗
11. Developing high-performance laminated Cu/TiC composites through melt infiltration of Ni-doped freeze-cast preforms10.1016/j.ceramint.2019.03.043 ↗
12. Synergistic strengthening mechanisms of copper matrix composites with TiO2 nanoparticles10.1016/j.msea.2019.138797 ↗
13. Structural, mechanical and tribological properties of Cu–ZrO2/GNPs hybrid nanocomposites10.1016/j.ceramint.2019.11.258 ↗
14. Preparation of high strength graphene reinforced Cu based nanocomposites via mechanical alloying method: microstructural, mechanical and electrical properties10.1007/s00339-020-3412-0 ↗
15. Evaluation of the microstructure, thermal and mechanical properties of Cu/SiC nanocomposites fabricated by mechanical alloying10.1007/s12613-020-2176-z ↗
16. Development and performance analysis of novel cast copper–SiC–Gr hybrid composites10.1016/j.matdes.2008.09.005 ↗
17. Microstructure and mechanical properties of Cu/SiC metal matrix composite fabricated via friction stir processing10.1016/j.matdes.2013.08.107 ↗
18. Characterization & tribological behaviour of aluminium metal matrix composites–A review10.1016/j.matpr.2021.05.060 ↗
19. Effect of addition of flyash and graphite on the mechanical properties of A6061-T610.1016/j.matpr.2021.10.258 ↗
20. Green lean six sigma for sustainable development: Integration and framework10.1016/j.eiar.2020.106396 ↗
21. Analysis and prioritization of Lean Six Sigma enablers with environmental facets using best worst method: A case of Indian MSMEs10.1016/j.jclepro.2020.123592 ↗
22. Review on using powder metallurgy method for production of metal based nanocomposites
23. Microstructure and elastic properties of hydroxyapatite/alumina nanocomposites prepared by mechanical alloying technique for biomedical applications
24. Recycling of aluminum dross and silica fume wastes for production of mullite-containing ceramics: Powder preparation, sinterability properties10.1016/j.ceramint.2022.07.087 ↗
25. Influence of graphene content on sinterability and physico-mechanical characteristics of Al/graphene composites prepared via powder metallurgy
26. ‘Evaluation of the electrical and dielectric behavior of the apatite layer formed on the surface of hydroxyapatite/hardystonite/copper oxide hybrid nanocomposites for bone repair applications10.1016/j.ceramint.2022.03.259 ↗
27. Synthesis, structural and biomedical characterization of hydroxyapatite/borosilicate bioactive glass nanocomposites10.1007/s10904-021-02070-6 ↗
28. Preparation of Cu/CrB2 composites with wellbalanced mechanical properties and electrical conductivity by ex situ powder metallurgy10.1016/j.jmrt.2022.01.112 ↗
29. Using nanotechnology in bleaching vegetable oils 203
30. The effect of TaC and NbC hybrid and mononanoparticles on AA2024 nanocomposites: Microstructure, strengthening, and artificial aging10.1515/ntrev-2022-0144 ↗
31. Mechanical properties, in vitro and in vivo bioactivity assessment of Na2OCaO-P2O5-B2O3-SiO2glass-ceramics10.1016/j.ceramint.2018.01.222 ↗
32. Effect of ZnO addition on structure,bioactivity, and corrosion protection of mica-fluorapatite glass/glass-ceramic10.1007/s41779-021-00618-w ↗
33. Evaluation of the dynamic behavior, elastic properties, and in vitro bioactivity of some borophosphosilicate glasses for orthopedic applications10.1016/j.jnoncrysol.2022.121539 ↗
34. Improved toughness, electrical conductivity and optical properties of bioactive borosilicate glasses for orthopedic applications10.1007/s00339-021-05116-1 ↗
35. Tribo-mechanical measurements and in vivo performance of zirconia-containing biphasic calcium phosphate material implanted in a rat model for bone replacement applications10.1016/j.matchemphys.2022.126085 ↗
36. Improvement of the microstructure and mechanical properties by hybridizing the surface of AA7075 by hexagonal boron nitride with carbide particles using the FSP process10.1016/j.jmrt.2022.01.150 ↗
37. Impact of hard and soft reinforcements on the microstructure, mechanical, and physical properties of the surface composite matrix manufactured by friction stir processing10.3390/coatings13020284 ↗
38. Effect of ZrO2 content on properties of Cu-ZrO2 nanocomposites synthesized by optimized high energy ball milling10.1016/j.ceramint.2018.10.147 ↗
39. Effect of nano-size Al2O3 reinforcement on the mechanical behavior of synthesis 7075 aluminum alloy composites by mechanical alloying10.1016/j.matchemphys.2012.12.015 ↗
40. Effects of ZrC content and mechanical alloying on the microstructural and mechanical properties of hypoeutectic Al-7 wt% Si composites prepared by spark plasma sintering10.1016/j.ceramint.2019.04.013 ↗
41. SiC content effect on the properties of Cu–SiC composites produced by mechanical alloying10.1016/j.jallcom.2015.01.298 ↗
42. The effect of particle size, sintering temperature and sintering time on the properties of Al–Al2O3 composites, made by powder metallurgy10.1016/j.jmatprotec.2009.04.007 ↗
43. Synthesis and structural properties characterization of titania/zirconia/calcium silicate nanocomposites for biomedical applications
44. Thermal expansion of Al matrix composites reinforced with hybrid micro-/nano-sized Al2O3 particles10.1016/j.jmst.2013.04.022 ↗
45. Influence of friction stir process on the physical, microstructural, corrosive, and electrical properties of an Al–Mg alloy modified with Ti–B additives10.3390/ma15030835 ↗
46. Effect of graphene nanoparticles on the physical and mechanical properties of the Al2024-graphene nanocomposites fabricated by powder metallurgy10.1016/j.rinp.2020.103343 ↗
47. Microstructure and tensile properties of bulk nanostructured aluminum/graphene composites prepared via cryomilling10.1016/j.msea.2014.12.102 ↗
48. Study of mechanical properties and wear behavior of nano-ZrO2-hardened Al2024 matrix composites prepared by stir cast method
49. Microstructural and mechanical characteristics of hybrid SiC/Cu composites with nano- and micro-sized SiC particles10.1016/j.ceramint.2018.10.235 ↗
50. Hardness, and wear analysis of Cu/Al2O3 composite for application in EDM electrode
51. Mechanical and wear evolution of in situ synthesized Ti-Cu alloy matrix hybrid composite reinforced by low-cost activated carbon and silica fume waste ceramic for industrial applications10.1016/j.jmrt.2022.12.073 ↗
52. Fabrication of Al/Al2O3/ SiC/graphene hybrid nanocomposites from Al-dross by powder metallurgy: Sinterability, mechanical and electrical properties10.1016/j.ceramint.2022.04.084 ↗
53. An investigation of the effect of SiC particle size on Cu–SiC composites10.1016/j.compositesb.2012.01.006 ↗
54. Mechanical alloying and sintering of nanostructured TiO2 reinforced copper composite and its characterization10.1016/j.matdes.2014.01.040 ↗
55. An investigation on the effect of sintering mode on various properties of copper-graphene metal matrix composite10.1016/j.apt.2017.04.013 ↗
56. Effect of sintering temperature on electrical and microstructure properties of hot pressed Cu-TiC composites10.2298/SOS1401015I ↗