journal article·2023-06

Ion conducting elastomer designed from thiourea-based dynamic covalent bonds with reprocessing capability

B. Kim, Y.J. Cho, D.-G. Kim, J.-H. Seo

Publisher page

Abstract

Developing ion conducting elastomer (ICE) that possesses reprocessing capability is highly desirable to avoid resource wastage and environmental crises. However, elastomers with covalent cross-linking are difficult to reprocess due to their thermosets properties. To address this challenge, a thiourea-based dynamic covalent network was employed to design the ICE. An analysis of the interaction between the lithium salt and the polymer chain resulted in the selection of LiTFSI. Furthermore, the finding from the analysis confirmed that not only the formation but also the behavior of the dynamic covalent network was affected by the interactions between the polymer chain and lithium salts. The resulting dynamic covalent elastomer can be repeatedly reprocessed through various methods (hot-press and solution processes) and exhibits proper dimensional stability and ionic conductivity (∼4.6 × 10−4 S/cm at 25 °C).
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer composites and self-healing · Dielectric materials and actuators · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Solid polymer electrolytes with high conductivity and transference number of Li ions for Li-based rechargeable batteries10.1002/advs.202003675 ↗
2. Nanocomposite polymer electrolytes for lithium batteries10.1038/28818 ↗
3. Stimuli-responsive polymers for sensing and actuation10.1039/C9MH00490D ↗
4. Ion-conducting, supramolecular crosslinked elastomer with a wide linear range of strain resistances10.1021/acsapm.1c00773 ↗
5. Hybrid materials and polymer electrolytes for electrochromic device applications10.1002/adma.201200213 ↗
6. Effective optimization of high voltage solid-state lithium batteries by using poly(ethylene oxide)-based polymer electrolyte with semi-interpenetrating network10.1002/adfm.202006289 ↗
7. Enabling stable cycling of 4.2 V high-voltage all-solid-state batteries with PEO-based solid electrolyte10.1002/adfm.201909392 ↗
8. Progress in solid polymer electrolytes for lithium-ion batteries and beyond10.1002/smll.202103617 ↗
9. Polymer electrolytes for lithium-based batteries: advances and prospects10.1016/j.chempr.2019.05.009 ↗
10. Thermosetting high-rate and high-safety polymer/inorganic composite separator for lithium-ion battery through a fast scalable Photo cross-linking process10.1021/acs.energyfuels.1c02553 ↗
11. Understanding the effect of UV-induced cross-linking on the physicochemical properties of highly performing PEO/LiTFSI-Based polymer electrolytes10.1021/acs.langmuir.9b00041 ↗
12. Cross-linking network based on Poly(ethylene oxide): solid polymer electrolyte for room temperature lithium battery10.1016/j.jpowsour.2019.02.090 ↗
13. Mechanical strong polymer cross-linking PVDF nanofiber electrolyte for lithium-ion batteries10.1007/s11581-020-03549-x ↗
14. Recent development of repairable, malleable and recyclable thermosetting polymers through dynamic transesterification10.1016/j.polymer.2020.122392 ↗
15. Dynamic covalent polymer networks: from old chemistry to modern day innovations10.1002/adma.201606100 ↗
16. Internal catalysis in covalent adaptable networks: phthalate monoester transesterification as a versatile dynamic cross-linking chemistry10.1021/jacs.9b07269 ↗
17. Liquid crystalline vitrimers with full or partial boronic-ester bond exchange10.1002/adfm.201906458 ↗
18. Weldable, malleable and programmable epoxy vitrimers with high mechanical properties and water insensitivity10.1016/j.cej.2019.02.177 ↗
19. Rapidly reprocessable cross-linked polyhydroxyurethanes based on disulfide exchange10.1021/acsmacrolett.8b00667 ↗
20. Upcycling of dynamic thiourea thermoset polymers by intrinsic chemical strengthening10.1038/s41467-022-28085-2 ↗
21. Mechanically robust, readily repairable polymers via tailored noncovalent cross-linking10.1126/science.aam7588 ↗
22. Silica-like malleable materials from permanent organic networks10.1126/science.1212648 ↗
23. Dynamic covalent polymer networks: a molecular platform for designing functions beyond chemical recycling and self-healing10.1021/acs.chemrev.0c00938 ↗
24. On the versatility of urethane/urea bonds: reversibility, blocked isocyanate, and non-isocyanate polyurethane10.1021/cr300195n ↗
25. Superstrong adhesive of isocyanate-free polyurea with a branched structure10.1021/acsapm.1c00056 ↗
26. Self-evolution of high mechanical strength dry-network polythiourethane thermosets into neat macroscopic hollow structures10.1002/anie.202117195 ↗
27. Toughening a self-healable supramolecular polymer by ionic cluster-enhanced iron-carboxylate complexes10.1002/anie.201913893 ↗
28. A dynamic supramolecular H-bonding network with orthogonally tunable clusteroluminescence10.1002/anie.202214422 ↗
29. An ultrastrong and highly stretchable polyurethane elastomer enabled by a zipper-like ring-sliding effect10.1002/adma.202000345 ↗
30. Robust and reprocessable artificial muscles based on liquid crystal elastomers with dynamic thiourea bonds
31. Acylhydrazine-based reticular hydrogen bonds enable robust, tough, and dynamic supramolecular materials10.1126/sciadv.abk3286 ↗
32. The crucial role of external force in the estimation of the topology freezing transition temperature of vitrimers by elongational creep measurements10.1016/j.polymer.2020.122804 ↗
33. Vitrimers: permanently crosslinked polymers with dynamic network topology10.1016/j.progpolymsci.2020.101233 ↗
34. Vitrimers: permanent organic networks with glass-like fluidity10.1039/C5SC02223A ↗
35. Control of optical and mechanical properties of poly(methyl methacrylate) by introducing lithium salt10.1016/j.optmat.2018.06.001 ↗
36. Binding energy and work function of organic electrode materials phenanthraquinone, pyromellitic dianhydride and their derivatives adsorbed on graphene10.1021/am504452a ↗
37. Semiempirical GGA-type density functional constructed with a long-range dispersion correction10.1002/jcc.20495 ↗
38. Mechanically interlocked polymer electrolyte with built-in fast molecular shuttles for all-solid-state lithium batteries
39. A poly (vinylidene fluoride-hexafluoropropylene) based three-dimensional network gel polymer electrolyte for solid-state lithium-sulfur batteries10.1016/j.cej.2018.10.092 ↗
40. Well-designed crosslinked polymer electrolyte enables high ionic conductivity and enhanced salt solvation10.1149/1945-7111/ab7c6e ↗
41. Electrochemically stable, high transference number lithium bis(malonato)borate polymer solution electrolytes10.1021/acs.chemmater.9b05219 ↗
42. High polymerization conversion and stable high-voltage chemistry underpinning an in situ formed solid electrolyte10.1021/acs.chemmater.0c02481 ↗
43. Recyclable, self-healing solid polymer electrolytes by soy protein-based dynamic network10.1002/advs.202103623 ↗
44. Lin · 2022
45. Polymer electrolytes based on acrylonitrile–butyl acrylate copolymers and lithium bis(trifluoromethanesulfone)imide10.1016/j.ssi.2004.08.046 ↗
46. Effect of plasticization on ionic conductivity enhancement in relation to glass transition temperature of crosslinked polymer electrolyte membranes10.1021/acs.macromol.6b00918 ↗
47. Epoxy-vitrimer composites based on exchangeable aromatic disulfide bonds: reprocessibility, adhesive, multi-shape memory effect10.1016/j.polymer.2020.122514 ↗
48. Microscopic dynamics and viscoelasticity of vitrimers10.1021/acs.macromol.2c00588 ↗
49. Poly(ethylene oxide)-based electrolytes for lithium-ion batteries10.1039/C5TA03471J ↗
50. PEO-LiN (SO 2 CF 2 CF 3) 2 polymer electrolytes: I. XRD, DSC, and ionic conductivity characterization10.1149/1.1403728 ↗