Effect of Potassium Tartrate on Removal Rate Selectivity of Co/TiN/TEOS for Cobalt “Buff Step” Chemical Mechanical Planarization
Source abstract
Abstract
As the technology node of integrated circuits (ICs) shrinks down to 7 nm and below, cobalt (Co) has been identified as the promising candidate for the interconnect/contact material. In this paper, colloidal silica was used as abrasive, potassium tartrate (PTH) was used as the promoter of TEOS and complexing agent of Co and titanium nitride (TiN), H2O2 was used as oxidant. The effects of PTH and H2O2 on the removal rate (RR) of Co/TiN/TEOS were studied. Polishing results showed that PTH can improve the RR of Co/TiN/TEOS effectively. The removal mechanism was revealed by X-ray photoelectron spectroscopy (XPS), electrochemical and UV–visible (UV-vis) spectroscopy measurements. It revealed that PTH can complex with Co(II)/Co(III) and TiO2+ ions produced during CMP, and formed Co(II)-PTH/Co(III)-PTH and TiO-PTH complex increases the RR of Co and TiN. The attractive force between silica abrasive and TEOS surface was improved as the concentration of PTH increased, resulting in the mechanical force increased and the RR of TEOS enhanced.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Cobalt CMP development for 7nm logic device10.1149/07705.0093ecst ↗
2. Tribo-electrochemical characterization of Ru, Ta and Cu CMP systems using percarbonate based solutions10.1149/2.0101511jss ↗
3. Study on the film forming mechanism, corrosion inhibition effect and synergistic action of two different inhibitors on copper surface chemical mechanical polishing for GLSI10.1016/j.apsusc.2019.144507 ↗
4. Effect of a novel chelating agent on defect removal during post-CMP cleaning10.1016/j.apsusc.2016.03.230 ↗
5. Cobalt polishing with reduced galvanic corrosion at copper/cobalt interface using hydrogen peroxide as an oxidizer in colloidal silica-based slurries10.1149/2.073206jes ↗
6. Fundamental study of chemical-mechanical polishing slurry of cobalt barrier mental for the next generation interconnect process10.1143/JJAP.49.05FC03 ↗
7. Synergetic effect of H2O2 and glycine on cobalt CMP in weakly alkaline slurry10.1016/j.mee.2014.02.002 ↗
8. Potassium tartrate as a complexing agent for chemical mechanical polishing of Cu/Co/TaN barrier liner stack in H2O2 based alkaline slurries10.1016/j.mssp.2019.104883 ↗
9. Role of additive in alkaline slurries for Co CMP10.1149/2.0111712jss ↗
10. Study on effective methods and mechanism of inhibiting cobalt removal rate in chemical mechanical polishing of GLSI low-tech node copper film10.1149/2.0271910jss ↗
11. Characterization of 1, 2, 4-Triazole as corrosion inhibitor for chemical mechanical polishing of cobalt in H2O2 based acid slurry10.1149/2.0131905jss ↗
12. The role of nonionic surfactants in tantalum based barrier CMP10.1149/2.0191705jss ↗
13. Formation of cobalt-BTA complexes and their removal from various surfaces relevant to cobalt interconnect applications10.1149/2.0011905jss ↗
14. Effect of amine based chelating agent and H2O2 on cobalt contact chemical mechanical polishing10.1149/2.0271808jss ↗
15. Effect of diethylenetriamine pentaacetate pentapotassium on chemical mechanical polishing of cobalt in H2O2 based slurry10.1149/2.0291905jss ↗
16. Cobalt ‘buff step’ chemical mechanical planarization10.1149/2.0171803jss ↗
17. Citric acid as a complexing agent in chemical mechanical polishing slurries for cobalt films for interconnect applications10.1149/2.0111709jss ↗
18. New insight in the behavior of Co-H2O system at 25-150 °C based on revised Pourbaix diagrams10.1016/j.corsci.2007.07.002 ↗
19. Achieving ultralow surface roughness and high material removal rate in fused silica via a novel acid SiO2 slurry and its chemical-mechanical polishing mechanism10.1016/j.apsusc.2019.144041 ↗
20. Consumables for the Chemical Mechanical Polishing (CMP)of Dielectrics and Conductors10.1557/PROC-337-121 ↗
21. Chemical mechanical polishing of titanium with colloidal silica containing hydrogen peroxide—mirror polishing and surface properties10.4012/dmj.28.68 ↗
22. The application of electrochemical metrologies for investigating chemical mechanical polishing of Al with a Ti barrier layer10.1016/S0254-0584(03)00312-2 ↗
23. A study of cobalt galvanic and pitting corrosion with combination of BTA and PMP10.1149/2.0141908jss ↗
24. The interaction of H2O with a TiO2 (110) surface10.1016/0039-6028(94)90837-0 ↗
25. Defect crystal structure of new TiO(OH)2 hydroxide and related lithium salt Li2TiO310.1039/c0dt00354a ↗
26. Effect of slurry ionic salts at dielectric silica CMP10.1149/1.1644609 ↗
27. Removal rate and surface quality of the GLSI silicon substrate during the CMP process10.1016/j.mee.2016.11.014 ↗
28. Effect of surface hydroxylation on ultra-precision machining of quartz glass10.1016/j.apsusc.2019.144170 ↗
29. Ionic enhancement of silica surface nanowear in electrolyte solutions10.1021/la303223q ↗
30. Improvement of barrier CMP Performance with alkaline slurry: role of ionic strength10.1149/2.0111809jss ↗
31. XPS: energy calibration of electron spectrometers. 1—an absolute, traceable energy calibration and the provision of atomic reference line energies10.1002/sia.740060302 ↗
32. On chemical shifts of ESCA and Auger lines in cobalt oxides10.1016/0368-2048(77)85081-0 ↗
33. Surface analysis and the adsorption of Co(II) on goethite10.1016/0021-9797(83)90199-6 ↗
34. XPS studies of solvated metal atom dispersed (SMAD) catalysts, evidence for layered cobalt-manganese particles on alumina and silica10.1021/ja00003a019 ↗