Synergistic Action Mechanism and Effect of Ammonium Dodecyl Sulfate and 1,2,4-triazole in Alkaline Slurry on Step Height Reduction for Cu CMP
Source abstract
Abstract
For the copper (Cu) chemical mechanical polishing (CMP) of integrated circuit Cu wiring, the removal rate (RR) in the concave is lower because of the protecting of inhibitor in the slurry, and the step height is reduced by the high RR different between convex and concave, thus realizing planarization. With the decrease of technology node and the shortcomings of traditional inhibitors, new environmental inhibitors have become the focus of research. The synergistic inhibiting effect of ammonium dodecyl sulfate (ADS) and 1,2,4-triazole (TAZ) in the H2O2 based weakly alkaline slurry during the Cu film CMP process was studied. Electrochemistry, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) measurements were used to analyze the reaction mechanism between Cu and mixed inhibitors. It was found that ADS was absorbed on the Cu surface via electrostatic interactions, by which a thin porous film with small openings was formed. Then chemisorbed TAZ molecules effectively filled up the small openings, and a compact passivating film was formed to protect the Cu surface. Based on the background slurry, incorporation of 0.1 wt% ADS + 0.003 wt% TAZ (bulk) and 0.1 wt% ADS + 0.005 wt% TAZ (soft landing) at pH = 8.5 in this slurry, lower step height was achieved dropping from the initial 3800 Å to 654 Å, and the slurry can be stable for at least three days. Such results indicate that mixed inhibitors may become a trend of industrial application, and such research has certain guiding significance for industrial production.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Integrated Circuits and Semiconductor Failure Analysis · Advanced Machining and Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Chemical mechanical planarization: slurry chemistry, materials, and mechanisms10.1021/cr900170z ↗
2. Achievement of high planarization efficiency in CMP of Cu at a reduced down pressure10.1016/j.mee.2008.11.047 ↗
3. Effect of non-ionic surfactant on Cu dishing and dielectric erosion correction in alkaline barrier CMP solution free of inhibitors10.1149/2.0191705jss ↗
4. Performance of sodium dodecyl sulfate in slurry with glycine and hydrogen peroxide for Cu-chemical mechanical polishing10.1149/1.3494159 ↗
5. Synergistic roles of mixed inhibitors and the application of mixed complexing ligands in Cu chemical mechanical polishing10.1016/j.mee.2011.06.029 ↗
6. 1,2,4-Triazole as a corrosion inhibitor in Cu chemical mechanical polishing10.1016/j.tsf.2013.12.047 ↗
7. Synergistic effect of glycine and BTA on step height reduction efficiency after Cu CMP in weakly alkaline slurry10.1149/2.0291612jss ↗
8. Effect of chelating agent and ammonium dodecyl sulfate on the interfacial behavior of Cu CMP for GLSI10.1149/2.0231809jss ↗
9. Synergistic roles of dodecyl sulfate and benzotriazole in enhancing the efficiency of CMP of Cu10.1149/1.2717410 ↗
10. Synergetic effect of benzotriazole and non-ionic surfactant on Cu chemical mechanical polishing in KIO4-based slurries10.1016/j.tsf.2014.01.086 ↗
11. Study on the adsorption and inhibition mechanism of 1,2,4-Triazole on Cu surface in Cu interconnection CMP10.1149/2.0121906jss ↗
12. Role of 1,2-benzisothiazolin-3-one (BIT) in the improvement of barrier CMP performance with alkaline slurry10.1149/2.0041909jss ↗
13. Integrated electrochemical analysis of polyvinyl pyrrolidone (PVP) as the inhibitor for Cu chemical mechanical planarization (Cu-CMP)10.1016/j.jallcom.2018.08.101 ↗
14. Influence of slurry components on Cu CMP performance in alkaline slurry10.1016/j.mee.2017.10.002 ↗
15. Effect of non-ionic surfactant on chemical mechanical planarization performance in alkaline Cu slurry10.1007/s12541-018-0186-9 ↗
16. Study on effective methods and mechanism of inhibiting cobalt removal rate in chemical mechanical polishing of GLSI low-tech node Cu film10.1149/2.0271910jss ↗
17. Effect of cystine in alkaline CMP slurry on controlling the galvanic corrosion at Al-Co interface10.1149/2.0071910jss ↗
18. Uniformity improvement and roughness reduction by using non-ion surfactant in the weakly alkaline barrier slurry10.1109/CSTIC.2019.8755686 ↗
19. Utility of dodecyl sulfate surfactants as dissolution inhibitors in chemical mechanical planarization of Cu10.1557/jmr.2005.0419 ↗
20. Compilation of PZC and IEP of sparingly soluble metal oxides and hydroxides from literature10.1016/j.cis.2009.08.003 ↗
21. Role of 1,2,4-Triazole in Co/Cu removal rate selectivity and galvanic corrosion during barrier CMP10.1149/2.0091712jss ↗
22. Study on the film forming mechanism, corrosion inhibition effect and synergistic action of two different inhibitors on Cu surface chemical mechanical polishing for GLSI10.1016/j.apsusc.2019.144507 ↗
23. Effect of surfactant on package substrate in chemical mechanical planarization10.1007/s40684-015-0008-9 ↗
24. An analytical dishing and step height reduction model for chemical mechanical planarization (CMP)10.1109/TSM.2003.815202 ↗
25. Effect of citric acid in Cu chemical mechanical planarization slurry on frictional characteristics and step height reduction of Cu pattern10.9725/kts.2018.34.6.226 ↗
26. Method for determining stability of CMP slurry10.1149/2.0241808jss ↗