Chemical Mechanical Polishing of Mo Using H2O2as Oxidizer in Colloidal Silica Based Slurries
Source abstract
Abstract
Chemical mechanical polishing (CMP) of molybdenum (Mo) using H2O2 based slurry with colloidal silica as abrasives has been systematically investigated. Effects of pH values, abrasives and additive of the slurry on CMP of Mo were investigated respectively. Results show that by adding ammonium sulfate (AS) in the alkaline H2O2 based slurry, both static etch rate (SER) and removal rate (RR) of Mo became much greater than without adding AS because of formation of a highly soluble (NH4)2MoO4. It is found that colloidal silica abrasive particles could adsorb on the Mo surface and have inhibitory effect on corrosion and polishing of Mo, and the higher concentration of colloidal silica particles, the lower SER and RR. AS addition in the slurry would enhance this phenomenon. Raman measurement results show that, silicomolybdic acid could form on the Mo surface in the slurry because of reaction between Moly oxide and silica particles, which causes the adsorption and inhibition of Mo etching and polishing.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced materials and composites · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. 10.1063/1.32777310.1063/1.327773 ↗
2. 10.1016/S0257-8972(02)00015-410.1016/S0257-8972(02)00015-4 ↗
3. 10.1063/1.150597710.1063/1.1505977 ↗
4. 10.1016/j.tsf.2004.09.04610.1016/j.tsf.2004.09.046 ↗
5. 10.1149/1.188201210.1149/1.1882012 ↗
6. 10.1088/0957-4484/19/20/20520210.1088/0957-4484/19/20/205202 ↗
7. Chen F. Ding S.-F. Zhang X.-M. Qu X.-P. , “Study of the Sputtered Mo/TaN and Mo-Ta Thin Film as Diffusion Barrier for Copper Metallization”, Proceedings of ICSICT 2010, pp.1042.10.1109/ICSICT.2010.5667536 ↗
8. Wang J.-X. Xu W.-Z. Chen F. Lu H.-S. Zeng X. Qu Xin-Ping , “The thermal and electrical properties of CoMo alloys as copper adhesion/barrier layers”, proceedings of International conference on solid state and integrated circuits technology (ICSICT) 2012, pp 389.10.1109/ICSICT.2012.6467672 ↗
9. Qu X. P. Wang X. Cao L. A. Xu. W. Z. , “Study of a single layer ultrathin CoMo film as a direct plateable adhesion/barrier layer for next generation interconnect,” in International interconnect technology conference IITC/AMC, 2014: 257.10.1109/IITC.2014.6831889 ↗
10. 10.1002/cssc.20110066010.1002/cssc.201100660 ↗
11. 10.1149/1.241194110.1149/1.2411941 ↗
12. 10.1016/S0022-0728(72)80100-110.1016/S0022-0728(72)80100-1 ↗
13. 10.1016/j.tsf.2012.05.03110.1016/j.tsf.2012.05.031 ↗
14. Pourbaix M. , “Atlas of Electrochemical Equilibria in Aqueous Solution”, 2nd ed., National Association of Corrosion Engineers, Houston, TX, 1974.
15. Chen F. Zeng X. Xu J.-B. Lu H.-S. Qu X.-P. , “The effect of H2O2 and Ammonia sulfate on the CMP of Molybdenum”, International Conference on Planarization/CMP Technology (ICPT), p. 377 (2012), Grenoble, France.
16. Zeng X. Feng H. Xu W.-Z. Xu J.-B. Qu X.-P. , “CMP of Mo using KIO3 as oxidizer in the colloidal silica based slurries”, International Conference Polarization/CMP Technology (ICPT), pp. 171 (2013), Taiwan, China.
17. Feng H. Cao L.-A. Feng J.-Y. Qu X.-P. , “Effects of Colloidal Silica on the CMP of Molybdenum in the Alkaline Slurry”, International Conference on Planarization/CMP Technology (ICPT), p. 66 (2014), Kobe, Japan.10.1109/ICPT.2014.7017248 ↗
18. Yang G. Feng H. Qu X.-P. , “Glycine effect on CMP of Mo”, proceedings of the International Conference on Polarization/CMP technology (ICPT-2015), Sep.30-Oct. 2, 2015, Phoenix, USA. pp. 247.
19. 10.1002/sia.74014011410.1002/sia.740140114 ↗
20. 10.1016/j.apsusc.2013.01.21810.1016/j.apsusc.2013.01.218 ↗
21. 10.1016/j.solmat.2014.03.03310.1016/j.solmat.2014.03.033 ↗
22. 10.1016/j.electacta.2010.12.02210.1016/j.electacta.2010.12.022 ↗
23. Speight J. G. , Lange's handbook of chemistry, sixteenth edition, Mcgraw-hill.
24. 10.1149/1.222125010.1149/1.2221250 ↗
25. 10.1016/j.tsf.2005.09.18910.1016/j.tsf.2005.09.189 ↗
26. 10.1016/j.jmatprotec.2009.05.02710.1016/j.jmatprotec.2009.05.027 ↗
27. 10.1016/j.jcis.2007.11.05710.1016/j.jcis.2007.11.057 ↗
28. 10.1109/TSM.2002.80487210.1109/TSM.2002.804872 ↗
29. 10.1021/j100171a05610.1021/j100171a056 ↗
30. 10.1021/j100044a02810.1021/j100044a028 ↗
31. 10.1016/S0167-2738(01)01035-910.1016/S0167-2738(01)01035-9 ↗
32. 10.1039/a903110c10.1039/a903110c ↗
33. 10.1021/i360052a01110.1021/i360052a011 ↗
34. 10.1080/0161494980800711410.1080/01614949808007114 ↗
35. 10.1006/jcat.1995.120710.1006/jcat.1995.1207 ↗
36. 10.1021/j100411a00610.1021/j100411a006 ↗
37. 10.1366/000370282463842110.1366/0003702824638421 ↗
38. 10.1016/S0039-9140(97)00138-010.1016/S0039-9140(97)00138-0 ↗
39. 10.1021/ja305572310.1021/ja3055723 ↗