journal article·2021-01-01Open access

Soft Chemical Mechanical Polishing Pad for Oxide CMP Applications

N. B. Kenchappa, Ramtej Popuri, Ashwin Chockkalingam, Puneet Jawali, Shiyan Jayanath, Daniel Redfield, Rajeev Bajaj

Abstract

Chemical mechanical polishing (CMP) is widely accepted as the best planarization technique for fabricating nanoscale devices. A soft CMP pad that can enable higher oxide removal rates (RRs) and good planarity has been proposed for oxide CMP applications. In this study, three pads namely, Pad-1 (hard), Pad-2 (soft), and a commercial pad (hard) were used to polish blanket oxide, and STI patterned wafers. The Pad-2 demonstrated significantly higher RRs and better planarization than the hard pads. Post-polish pad texture analysis on Pad-2 showed a uniform surface asperity distribution. This is due to the novel method of pad manufacturing, which enables precise material placement and consistent pore construction.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Integrated Circuits and Semiconductor Failure Analysis · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Formation of cobalt-BTA complexes and their removal from various surfaces relevant to cobalt interconnect applications10.1149/2.0011905jss ↗
2. Ammonium persulfate and potassium oleate containing silica dispersions for chemical mechanical polishing for cobalt interconnect applications10.1149/2.0021905jss ↗
3. Potassium oleate as a dissolution and corrosion inhibitor during chemical mechanical planarization of chemical vapor deposited Co films for interconnect applications10.1149/2.0251712jss ↗
4. In formulation of post cobalt cmp cleaning solution based on stability constants of metal complexes
5. Microlens array fabrication by chemical mechanical polishing10.1149/1.3065966 ↗
6. Surface shaping using chemical mechanical polishing10.1149/1.3547710 ↗
7. Analysis of light out-coupling from microlens array10.1016/j.optcom.2011.06.005 ↗
8. Rapid characterization and modeling of pattern-dependent variation in chemical-mechanical polishing10.1109/66.661292 ↗
9. Modelling the influence of pad bending on the planarization performance during CMP10.1557/PROC-566-45 ↗
10. Modeling of pattern dependencies for multi-level copper chemical-mechanical polishing processes10.1557/PROC-671-M4.3 ↗
11. In Cutting-edge CMP modeling for front-end-of-line (FEOL) and full stack hotspot detection for advanced technologies
12. In FEOL CMP modeling: progress and challenges
13. Vegunta · 2018
14. Physics of the coefficient of friction in CMP10.4313/TEEM.2007.8.2.079 ↗
15. Study of agglomeration behavior of chemical mechanical polishing slurry under controlled shear environments10.1149/2.0091805jss ↗
16. Method for Determining Stability of CMP Slurry10.1149/2.0241808jss ↗
17. Methodology for pad conditioning sweep optimization for advanced nodes10.1016/j.mee.2019.111101 ↗
18. Quantification of shear induced agglomeration in chemical mechanical polishing slurries under different chemical environments10.1016/j.mee.2019.03.012 ↗
19. Impact of Pad Material Properties on CMP Performance for Sub-10nm Technologies10.1149/2.0121905jss ↗
20. Characterization of the nature of shear-induced agglomerates as hard and soft in chemical mechanical polishing slurries10.1116/1.5065516 ↗
21. Khanna · Quantification of Particle Agglomeration During Chemical Mechanical Polishing of Metals and Dielectrics · 2010 · 72 · 1
22. Managing STI CMP performances through pad microstructure control using disruptive technology. In international conference on planarization/CMP technology (ICPT)—2018
23. Investigation of the impact of PAD surface texture from different pad conditioners on the CMP performance10.1149/2162-8777/aba726 ↗
24. Engineering surface texture of pads for improving CMP performance of Sub-10 nm nodes10.1149/2162-8777/abbcb5 ↗
25. High-performance pad conditioning (HPPC) arm for augmenting CMP performance10.1149/2162-8777/abbcb5 ↗
26. Effect of pad surface micro-texture on dishing and erosion during shallow trench isolation chemical mechanical planarization10.7567/JJAP.53.086501 ↗
27. In STI CMP endpoint robustness improvement through stribeck curve study
28. In innovative CMP solution for advanced STI process
29. The synergetic role of pores and grooves of the pad on the scratch formation during STI CMP10.1149/1.3447743 ↗
30. In soft CMP pads for low defectivity in CMP processes10.1109/ICPT.2014.7017273 ↗
31. A statistical polishing pad model for chemical-mechanical polishing10.1109/IEDM.1993.347263 ↗
32. Effects of CMP pad conditioner properties and performance on polishing pad10.1149/1.3489056 ↗
33. New developments in CMP pad conditioner technology10.1149/1.3699375 ↗
34. Polishing pads produced by an additive manufacturing process
35. Method and apparatus for forming porous advanced polishing pads using an additive manufacturing process
36. Porous chemical mechanical polishing pads
37. Daniel · 2018
38. Novel method to synthesize ceria coated silica particles10.1557/PROC-1157-E08-07 ↗
39. Polishing pads produced by an additive manufacturing process
40. Techniques for combining cmp process tracking data with 3d printed cmp consumables
41. Apparatus and method of forming a polishing article that has a desired zeta potential
42. Oliver · 2013 · Vol. 69
43. Shallow trench isolation chemical mechanical planarization: a review10.1149/2.0071511jss ↗
44. Chemical mechanical planarization: slurry chemistry, materials, and mechanisms10.1021/cr900170z ↗
45. A method for characterizing the pad surface texture and modeling its impact on the planarization in CMP10.1016/j.mee.2012.10.007 ↗
46. Study on stiffness and conditioning effects of CMP pad based on physical die-level CMP model10.1149/1.3369963 ↗
47. Characterization and modeling of oxide chemical-mechanical polishing using planarization length and pattern density concepts10.1109/66.999598 ↗
48. Effect of ceria abrasives on planarization efficiency in STI CMP process10.1149/1.3123774 ↗
49. A novel optical technique to measure pad-wafer contact area in chemical mechanical planarization10.1557/PROC-0914-F12-06 ↗
50. The impact of diamond conditioning on surface contact in CMP pads10.1557/PROC-0991-C01-02 ↗
51. In Pad conditioning and textural effects in chemical mechanical polishing, Rohm and Haas Electronic Materials CMP Technologies
52. Effects of pad properties on material removal in chemical mechanical polishing10.1016/j.jmatprotec.2006.11.216 ↗