journal article·2020-01-08Open access

Effect of Potassium Persulfate as an Additive On Chemical Mechanical Polishing Performance on C-, A- and R-Plane Sapphire

Yanan Lu, Xinhuan Niu, Chenghui Yang, Zhaoqing Huo, Yaqi Cui, Jiakai Zhou, Zhi Wang

Abstract

Sapphire with different crystal planes is widely used in light-emitting diode (LED), silicon on sapphire (SOS) IC chips, hybrid microelectronic applications, and other high-tech fields. Chemical mechanical polishing (CMP) technology is widely applied to obtain super-smooth and non-damaged wafer surface on the sapphire wafer. Due to its higher hardness and brittleness, sapphire CMP processing is difficult because of its lower processing efficiency. In this paper, in order to improve the CMP performance of different plane sapphire, K2S2O8 was used as an additive in the slurry. On the basics of chemical thermodynamic theory, HSC(enthalpy (H), entropy(S), heat capacity (C)) chemistry software was used to judge whether the chemical reactions can occur spontaneously. According to the experiment results, a higher material removal rate (MRR) was obtained with the slurry containing 0.2 wt% K2S2O8 and the surface roughness Sq of different plane sapphire substrates were all less than 0.3 nm. At the same time, the reaction mechanism and process of K2S2O8 was revealed. X-ray photoelectron spectroscopy (XPS) analysis showed that there were new chemical reactions between the sapphire wafer and K2S2O8 sol and the reaction products included aluminum sulfate (Al2(SO4)3) and potassium sulfate (K2SO4), which increased the chemical effect during the polishing process and resulted in the increasing of MRR.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Influence of nano abrasive on chemical mechanical ultra-precision machining of sapphire substrate surfaces10.4028/www.scientific.net/KEM.609-610.130 ↗
2. Removal mechanism of sapphire substrates (0001, 112̅0 and 101̅0) in mechanical planarization machining10.1016/j.ceramint.2017.08.194 ↗
3. Study on mechanism of crack propagation of sapphire single crystals of four different orientations under impact load and static load10.1016/j.ceramint.2019.01.021 ↗
4. An overview of recent advances in chemical mechanical polishing (CMP) of sapphire substrates10.1149/05201.0495ecst ↗
5. A comparative study on the properties of c-plane and a-plane GaN epitaxial films grown on sapphire wafers by pulsed laser deposition10.1016/j.vacuum.2016.03.032 ↗
6. Study on the processing characteristics of SiC and sapphire substrates polished by semi-fixed and fixed abrasive tools10.1016/j.triboint.2016.09.003 ↗
7. Effect of a pH regulator on sapphire substrate CMP10.1149/2.0221712jss ↗
8. Atmospheric pressure plasma enabled polishing of single crystal sapphire10.1016/j.cirp.2015.04.037 ↗
9. Preparation of Ni-doped colloidal silica abrasives and their chemical mechanical polishing performances on sapphire10.1149/2.0221605jss ↗
10. Preparation of Ce-doped colloidal SiO2 composite abrasives and their chemical mechanical polishing behavior on sapphire substrates10.1016/j.matchemphys.2015.12.026 ↗
11. Preparation of Monodisperse Ti-doped colloidal SiO2 composite abrasives and their chemical mechanical polishing performances on sapphire substrates10.1149/2.0231612jss ↗
12. Preparation of a novel catalyst (SoFeIII) and its catalytic performance towards the removal rate of sapphire substrate during CMP process10.1016/j.triboint.2017.12.016 ↗
13. Chemical mechanical polishing (CMP) anisotropy in sapphire10.1016/j.apsusc.2004.04.027 ↗
14. Role of a new type chelating agent in chemical mechanical polishing of r-plane sapphire substrate10.1149/2.0201709jss ↗
15. Fe-Nx/C assisted chemical–mechanical polishing for improving the removal rate of sapphire10.1016/j.apsusc.2015.03.041 ↗
16. Effects of mixed ultrafine colloidal silica particles on chemical mechanical polishing of sapphire10.7567/jjap.57.07md03 ↗
17. Grinding forces in micro slot-grinding (MSG) of single crystal sapphire10.1016/j.ijmachtools.2016.10.004 ↗
18. Preparation of MgO doped colloidal SiO2 abrasive and their chemical mechanical polishing performance on C-, R- and a-plane sapphire substrate10.1016/j.ceramint.2018.05.087 ↗
19. Study on planarization machining of sapphire wafer with soft-hard mixed abrasive through mechanical chemical polishing10.1016/j.apsusc.2016.07.155 ↗
20. Research on R-plane sapphire substrate CMP removal rate based on a new-type alkaline slurry10.1149/2.0241803jss ↗
21. Effect of chloride ions on the chemical mechanical planarization efficiency of sapphire substrate10.1149/2.0161909jss ↗
22. Potassium persulfate as an oxidizer in chemical mechanical polishing slurries relevant for copper interconnects with cobalt barrier layers10.1007/s10853-020-04579-6 ↗
23. Atomically smooth gallium nitride surface prepared by chemical-mechanical polishing with S2O82- - Fe2+ based slurry10.1016/j.triboint.2016.09.037 ↗
24. Crystalline orientation effects on material removal of sapphire by femtosecond laser irradiation10.1016/j.ceramint.2019.08.056 ↗
25. Crystallography for Solid State Physics10.1088/0031-9112/34/4/038 ↗
26. Application of HSC Chemistry software in university chemical scientific research10.3969/j.issn.1007-0834.2013.02.009 ↗
27. Application of HSC chemistry software in the determination of chemical thermodynamic function by measuring electromotance10.3969/j.issn.1007-1865.2017.11.133 ↗
28. Quantification of shear induced agglomeration in chemical mechanical polishing slurries under different chemical environments10.1016/j.mee.2019.03.012 ↗
29. Intercomparison of surface analysis of thin aluminium oxide films10.1002/sia.740151108 ↗
30. Solid catalyst treated with anionXVIII. Benzoylation of toluene with benzoyl chloride and benzoic anhydride catalysed by solid superacid of sulfate-supported alumina10.1016/S0166-9834(00)82197-1 ↗
31. Auger and photoelectron line energy relationships in aluminum–oxygen and silicon–oxygen compounds10.1116/1.571870 ↗
32. A qualitative and quantitative study of the oxides of aluminum and silicon using AES and XPS10.1016/0368-2048(85)80038-4 ↗
33. X-Ray photoelectron spectroscopic analysis of surface products on pyrite formed by baterial leaching10.2116/bunsekikagaku.40.11_609 ↗