The CORE Sequence: A Nanoscale Fluorocarbon-Free Silicon Plasma Etch Process Based on SF 6 /O 2 Cycles with Excellent 3D Profile Control at Room Temperature
Source abstract
Abstract
This study focuses on the development of a fluorocarbon-free directional silicon etching process, called CORE (Clear, Oxidize, Remove, and Etch) in which a switching sequence of SF 6 and O 2 is operated at room temperature. This distinguishes it from the old-fashioned room temperature and cryogenic mixed RIE processes as CORE enables a higher selectivity, creates pattern independency of etching profiles and works excellent at room temperature. The CORE process resembles the well-known SF 6 -based Bosch process, but the usual C 4 F 8 inhibitor is replaced by O 2 oxidation with self-limiting characteristics. Therefore the CORE result is similar to Bosch, however has the advantage of preventing the pile-up of fluorocarbon deposits at the topside of deep-etched or nano-sized features. At the same time, process drift is minimized as the reactor wall is staying perfectly clean. The CORE process has shown an excellent performance in high aspect ratio (3D) nanoscale structures with an accurate and controllable etch rate between 1 and 50 nm min −1 (and SiO 2 -selectivity of ca. 35) using the etch-tool in the RIE-mode. By adding the ICP source (DRIE-mode), a directional etch rate up to 1 μ m min −1 (at 50 sccm SF 6 flow) and selectivity >200 for SiO 2 is possible.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Semiconductor materials and devices · Diamond and Carbon-based Materials Research · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Progress and prospects in nanoscale dry processes: How can we control atomic layer reactions?10.7567/JJAP.56.06HA02 ↗
2. Foundations of low-temperature plasma enhanced materials synthesis and etching10.1088/1361-6595/aaa86c ↗
3. Thermal atomic layer etching: mechanism, materials and prospects10.1016/j.pnsc.2018.11.003 ↗
4. Status and prospects of plasma-assisted atomic layer deposition10.1116/1.5088582 ↗
5. Transistors could stop shrinking in 202110.1109/MSPEC.2016.7551335 ↗
6. Plasma etching in integrated circuit manufacture—A review10.1116/1.569137 ↗
7. Microwave plasma etching10.1016/0042-207X(84)90177-5 ↗
8. A survey on the reactive ion etching of silicon in microtechnology10.1088/0960-1317/6/1/002 ↗
9. Reactive ion etching for submicron structures of refractory metal silicides and polycides10.1116/1.582670 ↗
10. The black silicon method: a universal method for determining the parameter setting of a fluorine-based reactive ion etcher in deep silicon trench etching with profile control10.1088/0960-1317/5/2/015 ↗
11. The black silicon method II: The effect of mask material and loading on the reactive ion etching of deep silicon trenches10.1016/0167-9317(94)00149-O ↗
12. The black silicon method IV: The fabrication of three-dimensional structures in silicon with high aspect ratios for scanning probe microscopy and other applications10.1109/MEMSYS.1995.472548 ↗
13. Low‐temperature reactive ion etching and microwave plasma etching of silicon10.1063/1.99382 ↗
14. The black silicon method. VI. High aspect ratio trench etching for MEMS applications10.1109/MEMSYS.1996.493989 ↗
15. BSM 7: RIE lag in high aspect ratio trench etching of silicon10.1016/S0167-9317(96)00142-6 ↗
16. The black silicon method. VIII. A study of the performance of etching silicon using SF6/O2-based chemistry with cryogenical wafer cooling and a high density ICP source.10.1016/S0026-2692(01)00039-8 ↗
17. Guidelines for etching silicon MEMS structures using fluorine high-density plasmas at cryogenic temperatures10.1109/JMEMS.2002.800928 ↗
18. Black silicon method X: a review on high speed and selective plasma etching of silicon with profile control: an in-depth comparison between Bosch and cryostat DRIE processes as a roadmap to next generation equipment10.1088/0960-1317/19/3/033001 ↗
19. Laermer
20. Inventors; Robert Bosch GmbH, assignee. Method of anisotropically etching silicon
21. DREM: Infinite etch selectivity and optimized scallop size distribution with conventional photoresists in an adapted multiplexed Bosch DRIE process10.1016/j.mee.2018.01.034 ↗
22. A new sidewall protection technique in microwave plasma etching using a chopping method10.7567/SSDM.1986.A-6-1 ↗
23. DREM2: a facile fabrication strategy for freestanding three dimensional silicon micro-and nanostructures by a modified Bosch etch process10.1088/1361-6439/aad0c4 ↗
24. Highly ordered 3D silicon micro‐mesh structures integrated with nanowire arrays: a multifunctional platform for photodegradation, photocurrent generation, and materials conversion10.1002/cnma.201800371 ↗
25. Large area three‐dimensional photonic crystal membranes: single‐run fabrication and applications with embedded planar defects10.1002/adom.201801176 ↗
26. The black silicon method V: A study of the fabricating of movable structures for micro electromechanical systems10.1109/SENSOR.1995.717287 ↗
27. Chang · 2018
28. Improvement of high aspect ratio Si etching by optimized oxygen plasma irradiation inserted DRIE10.1088/0960-1317/19/9/095022 ↗
29. Open and filled DRIE trenches with high aspect ratio used for micro-mirror scanners10.1109/stysw.2011.6155841 ↗
30. Measurements and modeling of thin silicon dioxide films on silicon10.1149/1.2086373 ↗
31. Ellipsometric determination of optical constants for silicon and thermally grown silicon dioxide via a multi-sample, multi-wavelength, multi-angle investigation10.1063/1.367101 ↗
32. Deep anisotropic silicon etch method
33. Black silicon method XI: oxygen pulses in SF6 plasma10.1088/0960-1317/20/7/075027 ↗
34. Lieberman · 200510.1002/0471724254 ↗
35. Notching as an example of charging in uniform high density plasmas.10.1116/1.588431 ↗
36. On the origin of the notching effect during etching in uniform high density plasmas.10.1116/1.589258 ↗
37. Sub-10 nm silicon ridge nanofabrication by advanced edge lithography for NIL applications10.1016/j.mee.2008.11.067 ↗
38. DEEMO: a new technology for the fabrication of microstructures10.1109/MEMSYS.1995.472573 ↗
39. Fabrication of a silicon oxide stamp by edge lithography reinforced with silicon nitride for nanoimprint lithography10.1088/0960-1317/18/6/064013 ↗
40. New approaches to nanofabrication: molding, printing, and other techniques10.1021/cr030076o ↗
41. Combining retraction edge lithography and plasma etching for arbitrary contour nanoridge fabrication10.1088/0960-1317/20/9/095022 ↗
42. Novel 14-nm scallop-shaped FinFETs (S-FinFETs) on bulk-Si substrate10.1186/s11671-015-0958-4 ↗
43. Multi-silicon ridge nanofabrication by repeated edge lithography10.1088/0957-4484/20/31/315305 ↗
44. Fabrication of 3D fractal structures using nanoscale anisotropic etching of single crystalline silicon10.1088/0960-1317/23/5/055024 ↗
45. Tas NR. 3D nanofabrication of fluidic components by corner lithography10.1002/smll.201201446 ↗
46. 3D-nanomachining using corner lithography10.1109/NEMS.2008.4484432 ↗
47. General relationship for the thermal oxidation of silicon10.1063/1.1713945 ↗
48. Oxide growth on etched silicon in air at room temperature10.1149/1.2134225 ↗
49. Oxidation of etched silicon in air at room temperature; Measurements with ultrasoft X-ray photoelectron spectroscopy (ESCA) and neutron activation analysis10.1016/0039-6028(83)90388-6 ↗
50. Growth of native oxide on silicon10.1149/1.2095761 ↗
51. Growth of native oxide on a silicon surface10.1063/1.347181 ↗
52. Lateral size of atomically flat oxidized region on Si (111) surface10.1016/S0169-4332(97)80065-7 ↗
53. Watanabe · 1999 · 56710.1557/PROC-567-189 ↗
54. In situ Observation of native oxide growth on a Si (100) surface using grazing incidence X-ray reflectivity and fourier transform infrared spectrometer10.1143/JJAP.40.5312 ↗
55. Layer-by-layer oxidation of silicon10.4028/www.scientific.net/ssp.76-77.139 ↗
56. Self-limitation of native oxides explained10.1007/s12633-015-9366-8 ↗
57. An approach to modeling of silicon oxidation in a wet ultra-diluted ambient10.1016/j.mee.2005.04.101 ↗
58. On the growth of native oxides on hydrogen-terminated silicon surfaces in dark and under illumination with light10.1149/1.2356279 ↗
59. Retarded oxidation of Si nanowires10.1063/1.2424297 ↗
60. Understanding of the retarded oxidation effects in silicon nanostructures10.1063/1.4729410 ↗
61. Assessment of Ultra‐Thin SiO2 Film Thickness Measurement Precision by Ellipsometry10.1109/RTP.2010.5624252 ↗
62. Critical review of the current status of thickness measurements for ultrathin SiO2 on Si Part V: Results of a CCQM pilot study.10.1002/sia.1909 ↗
63. A comparison of thickness values for very thin SiO2 films by using ellipsometric, capacitance-voltage, and HRTEM measurements.10.1149/1.2133710 ↗
64. Low-temperature oxidation10.1007/BF00603582 ↗
65. Theory of the oxidation of metals10.1088/0034-4885/12/1/308 ↗
66. A model for oxidation kinetics in air at room temperature of hydrogen-terminated (1 0 0) Si10.1063/1.2245191 ↗
67. Ultrathin SiO2 interface layer growth10.1109/RTP.2010.5624252 ↗
68. Ultrathin interfacial SiO2 layer process research for high-k gate last gate stacks10.1109/CSTIC.2015.7153410 ↗
69. Adsorbed water on a silicon wafer surface exposed to atmosphere10.1143/JJAP.40.6198 ↗
70. Evolution of the adsorbed water layer structure on silicon oxide at room temperature10.1021/jp053042o ↗
71. Average molecular orientations in the adsorbed water layers on silicon oxide in ambient conditions10.1039/b810309g ↗
72. Quantifying adsorbed water monolayers on silicon MEMS resonators exposed to humid environments10.1016/j.sna.2011.09.002 ↗
73. The dependence of ellipsometric parameters Δ and Ψ on refractive index of superficial film10.1088/1757-899X/477/1/012028 ↗
74. Aspect ratio dependence of silicon trench oxidation in downstream of microwave oxygen plasma10.7567/1347-4065/aaee8e ↗