journal article·2018

Method for Determining Stability of CMP Slurry

Aniruddh J. Khanna, Sushant Gupta, Purushottam Kumar, Feng-Chi Chang, Rajiv K. Singh

Publisher page

Abstract

Increasing exacting requirements for defectivity during chemical mechanical planarization/polishing (CMP) process has led to an increased demand of highly stable CMP slurries. Herein, we describe a novel method to obtain values of stability ratio (SR) denoted as 'W', a parameter which defines the ability of slurry particles to resist agglomeration. We found that SR is independent of shear rates, is constant for a given slurry and higher the value of SR, lesser is the inclination of the slurry particles to agglomerate even under intense shear stress conditions. We conclude that for determining slurry stability, evaluation of the SR value is a much better metric than traditional methods such as zeta potential, particle size measurements etc. For a 10 wt% silica slurry depending upon conditions such as pH, addition of salts, particle size; values of SR were in the range 1.26–16.53. Based on comparison with CMP defects data, we concluded that (among the slurry samples studied) 10wt% solids, 35 nm basic pH silica slurry with no salt, having SR value 16.53 is most stable and 35 nm acidic pH silica slurry with KCl salt and 135 nm basic pH slurry having SR value 1.26 are relatively most unstable.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Integrated Circuits and Semiconductor Failure Analysis · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. 10.1149/1.208543410.1149/1.2085434 ↗
2. 10.1149/1.208587210.1149/1.2085872 ↗
3. White F. Hill W. Eslinger S. Payne E. Cote W. Chen B. Johnson K. , “Damascene stud local interconnect in CMOS technology,” presented at Electron Devices Meeting, 1992. Technical Digest., International, (1992).10.1109/IEDM.1992.307365 ↗
4. Givens J. Geissler S. Cain O. Clark W. Koburger C. Lee J. , “A Low-Temperature Local Interconnect Process in a 0.25 μm Channel CMOS Logic Technology with Shallow Trench Isolation,” presented at Proceedings of the 11th International VLSI Multilevel Interconnection Conference, (1994).
5. Singh R. K. Bajaj R. Moinpour M. Meuris M. , Chemical-Mechanical Polishing 2000–Fundamentals and Materials Issues, 613, (2001).10.1557/PROC-613-E1.4.1 ↗
6. Hayashi S. Poust B. Heying B. Goorsky M. S. , “Silicon Carbide and Related Materials 2003,” Trans Tech Publications, 1605, (2004).10.4028/www.scientific.net/MSF.457-460.1605 ↗
7. 10.1109/LED.2006.88793210.1109/LED.2006.887932 ↗
8. 10.1049/el:2005103810.1049/el:20051038 ↗
9. Jay L. Ma Y. Wang Y. Bajaj R. Redekar F. , “Process and Material Challenges for 0.1-μm Copper Technology,” presented at Presented at 5th International Symposium on Chemical-Mechanical Polishing, Lake Placid, NY, Aug. 2000.
10. Bajaj R. Redekar F. Wijekoon K. , “Unlocking the Damascene Puzzle,” presented at VMIC Conference, Santa Clara, CA, Jun. 2000.
11. Babu S. V. Cadien K. C. Yano H. , Chemical-Mechanical Polishing 2001-Advances and Future Challenges, 671. Warrendale, PA, 2001.10.1016/B978-081551442-8.50017-1 ↗
12. Tsai S. , [CD-ROM], presented at Proceedings IITC Conference, IEEE Electron Devices Society, Piscataway, NJ, 2002.
13. Chang C.-C. , [CD-ROM] presented at Proceedings IITC Conference, IEEE Electron Devices Society, 2002.
14. Yu K. C. , [CD-ROM], Piscataway, NJ., 2002.
15. 10.1149/1.139393110.1149/1.1393931 ↗
16. 10.1116/1.163495810.1116/1.1634958 ↗
17. Chang F. C. , “Externally Induced Agglomeration During Chemical Mechanical Polishing of Metals and Dielectrics,” in Materials Science & Engineering, Ph.D. Gainesville, Florida: University of Florida, 2008, pp. 1.
18. Basim G. B. , “Formulation of Engineered Particulate Systems for Chemical Mechanical Polishing Applications,” in Materials Science & Engineering, Ph.D. Gainesville, Florida: University of Florida, 2002, pp. 1.
19. “Interconnect,” International Technology Roadmap for Semiconductors, 1 (2007).10.1109/ICEPT.2007.4441555 ↗
20. International Technology Roadmap for Semiconductors, 2013, http://www.itrs2.net/2013-itrs.html/Tables/FEP_2013Tables.xlsx/TableFEP13.
21. “Interconnect,” International Technology Roadmap for Semiconductors, 1 (2002).
22. 10.1149/1.139074110.1149/1.1390741 ↗
23. 10.1149/1.139085110.1149/1.1390851 ↗
24. BIelmann M. Mahajan Y. Singh R. K. Agarwal P. Mischler S. Rosset E. Landolt D. , Chemical- Mechanical Polishing–Fundamentals and Challenges, 566. Warrendale, PA., 2000.10.1557/PROC-566-97 ↗
25. Lee S.-M. Choi W. Craciun V. Jung S.-H. Singh R. K. , “Electrochemical Measurements to Understand the Dynamics of the Chemically Modified Surface Layer Formation During Copper CMP,” presented at Materials Research Society, San Francisco, CA, April 2002.
26. 10.1149/1.183834110.1149/1.1838341 ↗
27. 10.1149/1.307430610.1149/1.3074306 ↗
28. Stechemesser H. Dobias B. , Coagulation and Flocculation, Second ed. Boca Raton: CRC Press, Taylor and Francis Group, 2005.10.1201/9781420027686 ↗
29. 10.1149/2.0091805jss10.1149/2.0091805jss ↗
30. Elimelech M. Gregory J. Jia X. A W. R. , “Particle Deposition and Aggregation–Measurement, Modelling and Simulation,” Elsevier, 157 (1998).
31. Russel W. B. Saville D. A. Schowalter W. R. , Colloidal Dispersions. United Kingdom: Cambridge University Press, 1989.10.1017/CBO9780511608810 ↗