journal article·2020-01-08

Investigation of the Impact of Pad Surface Texture from Different Pad Conditioners on the CMP Performance

Aniruddh J. Khanna, Mayu Yamamura, Veera Raghava Kakireddy, Ashwin Chockalingam, Puneet Jawali, Nandan Baradanahalli Kenchappa, Venkat Hariharan, Daniel Redfield, Rajeev Bajaj

Publisher page

Abstract

Chemical mechanical polishing (CMP) is a common method for planarization/polishing materials during integrated circuits (IC) fabrication. Pad conditioning is a critical component of a CMP process. Herein, the impact of surface textures created by different types of pad conditioners (PC) such as coarse, mid-coarse, and fine PC on the solid pads are studied. Additional surface texture parameters such as surface height distribution, skewness, Dale Void Volume are used to determine an optimum surface texture that gives desired CMP performance such as material removal rate and within-wafer non-uniformity. It was determined that an optimum surface texture on a solid CMP pad can be obtained with a mid-coarse disk. It is further demonstrated that by the addition of porosity to the pads, it is possible to recreate an optimum surface texture and desired CMP performance, similar to that obtained with a mid-coarse disk and a solid pad. Tribological mechanisms of the different pad and PC combinations are presented using the coefficient of friction. It is concluded that porous pad and fine PC pairing can tackle the issues of slurry transport limitations, lack of asperity contact, and process stability over pad life.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Microlens array fabrication by chemical mechanical polishing10.1149/1.3065966 ↗
2. Surface shaping using chemical mechanical polishing10.1149/1.3547710 ↗
3. Analysis of light out-coupling from microlens array10.1016/j.optcom.2011.06.005 ↗
4. ITRS Reports · 2003 · FEP · 1
5. ITRS Reports · 2007 · FEP · 1
6. ITRS Reports · 2013 · FEP · 1
7. Operational aspects of chemical mechanical polishing polish pad profile optimization10.1149/1.1393997 ↗
8. Pad surface microstructure and optimization of the conditioning sweep
9. Effect of conditioner type and downforce, and pad break-in time, on pad surface micro-texture in chemical mechanical planarization10.1149/2.0261811jss ↗
10. Effect of process conditions on uniformity of velocity and wear distance of pad and wafer during chemical mechanical planarization10.1007/s11664-004-0294-4 ↗
11. Chemical mechanical polishing: theory and experiment10.1007/s40544-013-0035-x ↗
12. In situ profile control with titan edge™ heads for dielectric planarization of advanced CMOS devices
13. Methodology for pad conditioning sweep optimization for advanced nodes10.1016/j.mee.2019.111101 ↗
14. Retaining ring design impact on CMP process stability and optimization10.1557/PROC-1249-E02-01 ↗
15. Planarization improvement using non-porous polishing pad in ILD CMP
16. Semi-empirical material removal rate distribution model for SiO2 chemical mechanical polishing (CMP) processes10.1016/j.precisioneng.2012.12.006 ↗
17. Influence of colloidal abrasive size on material removal rate and surface finish in SiO2 chemical mechanical polishing10.1080/10402000208982545 ↗
18. Study of agglomeration behavior of chemical mechanical polishing slurry under controlled shear environments10.1149/2.0091805jss ↗
19. Method for determining stability of CMP slurry10.1149/2.0241808jss ↗
20. Effects of CMP pad conditioner properties and performance on polishing pad, process and wafer removal rate10.1149/1.3489056 ↗
21. Effect of temperature on copper damascene chemical mechanical polishing process10.1116/1.2825143 ↗
22. Quantification of shear induced agglomeration in chemical mechanical polishing slurries under different chemical environments10.1016/j.mee.2019.03.012 ↗
23. Impact of pad material properties on CMP Performance for Sub-10nm technologies10.1149/2.0121905jss ↗
24. Characterization of the nature of shear induced agglomerates as hard & soft in chemical mechanical polishing slurries10.1116/1.5065516 ↗
25. Quantification of particle agglomeration during CMP of metals and dielectrics
26. Effect of temperature on copper chemical mechanical planarization
27. Effect of slurry characteristics on the surface tribology during copper CMP process10.1149/1.2819480 ↗
28. Some Tribological aspects of thin film copper during CMP10.1115/IJTC2006–12307 ↗
29. Polishing pads produced by an additive manufacturing process
30. Polishing pads produced by an additive manufacturing process
31. Polishing pads produced by an additive manufacturing process
32. Techniques for combining CMP process tracking data with 3D printed CMP consumables
33. Managing STI CMP performances through pad microstructure control using disruptive technology
34. Thin plastic polishing article for cmp applications
35. Potassium oleate as a dissolution and corrosion inhibitor during chemical mechanical planarization of chemical vapor deposited co films for interconnect applications10.1149/2.0251712jss ↗
36. Ammonium persulfate and potassium oleate containing silica dispersions for chemical mechanical polishing for cobalt interconnect applications10.1149/2.0021905jss ↗
37. Formation of Cobalt-BTA complexes and their removal from various surfaces relevant to cobalt interconnect applications10.1149/2.0011905jss ↗
38. Novel Method to synthesize ceria coated silica particles10.1557/PROC-1157-E08-07 ↗
39. Ceria-based slurries for non-prestonian removal of silicon dioxide films10.1149/2.0091502jss ↗
40. Dressing characteristics of oriented single diamond on CMP polyurethane pad10.1080/10910340902776101 ↗
41. Effect of conditioning downforce and pad break-in time on pad surface micro-texture10.1149/2.0271805jss ↗
42. A method for characterizing the pad surface texture and modeling its impact on the planarization in CMP10.1016/j.mee.2012.10.007 ↗
43. Advances in CMP Pad Conditioning
44. Pad Surface Analysis and Conditioning Effects: Implications on Process Design, Break-in Response and Next Generation Pad and Conditioning Platforms
45. Rohm and Haas Electronic Materials CMP Technologies
46. Pad Conditioning Effects in Chemical Mechanical Polishing
47. Fundamentals of tribology and bridging the gap between the macro- and micro/nanoscales10.1007/978-94-010-0736-8 ↗
48. Fundamental tribological and removal rate studies of inter-layer dielectric chemical mechanical planarization10.1143/JJAP.42.6371 ↗
49. Method for ultra rapid determination of the lubrication mechanism in chemical mechanical planarization10.1149/2.0111701jss ↗
50. Effect of pad surface texture and slurry abrasive concentration on tribological and kinetic attributes of ILD CMP10.1557/PROC-767-F2.8 ↗
51. Improvements in stribeck curves for copper and tungsten chemical mechanical planarization on soft pads10.1149/2.0241705jss ↗
52. ILD CMP with silica abrasive particles: effect of pore size of CMP Pad on removal rate profiles10.1149/2.020303jss ↗
53. The effect of polymer hardness, pore size, and porosity on the performance of thermoplastic polyurethane-based chemical mechanical polishing pads10.1557/jmr.2013.173 ↗
54. Ludema · 199610.1201/9781439821893 ↗