journal article·2019

Solution-Processed Semitransparent Inverted Organic Solar Cells from a Transparent Conductive Polymer Electrode

Dong Jae Lee, Dong Kyo Heo, Changhun Yun, Yong Hyun Kim, Moon Hee Kang

Publisher page

Abstract

We fabricated a solution-processed semitransparent organic solar cell from a transparent conductive polymer electrode. The top metal electrode was replaced with a transparent conductive polymer, poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS). The advantage of using the PEDOT:PSS conductive polymer is that organic solar cell (OPV) can be fabricated from solution process at plastic-compatible low temperature (<200°C). In addition, due to the absence of an opaque top metal electrode, the final OPVs exhibit semitransparency. The transmittance (T) of the final OPV was adjusted by changing the concentration of the organic materials in a solvent. As the concentration of the organic materials increased from 1.5 to 3.1%, the average weighted solar transmittance decreased from 53.9 to 45.2%. I-V characteristics of the OPVs with various transmittances were measured under the AM1.5G 100mW/m2 solar simulator, and the conversion efficiency was 1.2, 2.0, 1.3% for the OPV with T of 53.9, 51.2, 45.2%, respectively.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. 10.1002/pip.304010.1002/pip.3040 ↗
2. 10.1016/j.solmat.2016.04.04610.1016/j.solmat.2016.04.046 ↗
3. Kang M. H. , “Development of High-Efficiency Silicon Solar Cells and Modeling the Impact of System Parameters on Levelized Cost of Electricity,” Georgia Institute of Technology, 2013.
4. 10.1016/j.orgel.2011.02.01710.1016/j.orgel.2011.02.017 ↗
5. 10.1021/nn406672n10.1021/nn406672n ↗
6. 10.1063/1.12412210.1063/1.124122 ↗
7. 10.1063/1.37170810.1063/1.371708 ↗
8. 10.1021/nn100523210.1021/nn1005232 ↗
9. 10.1002/adma.20130092310.1002/adma.201300923 ↗
10. 10.1063/1.339467910.1063/1.3394679 ↗
11. 10.1021/nl072838r10.1021/nl072838r ↗
12. 10.1002/adma.20110030410.1002/adma.201100304 ↗
13. 10.1002/aelm.20150001710.1002/aelm.201500017 ↗
14. 10.1039/c2ee22595f10.1039/c2ee22595f ↗
15. 10.1039/C1EE02475B10.1039/C1EE02475B ↗
16. 10.1039/c3ee41077c10.1039/c3ee41077c ↗
17. 10.7567/JJAP.55.08160210.7567/JJAP.55.081602 ↗
18. 10.1039/c3ta11726j10.1039/c3ta11726j ↗
19. Schwertheim S. Grewe O. Hamm I. Mueller T. Pichner R. Fahrner W. R. , “PEDOT:PSS layers as replacements for the transparent conductive coatings of organic solar cells,” in 2010 35th IEEE Photovoltaic Specialists Conference, 2010, pp. 1639.10.1109/PVSC.2010.5616544 ↗
20. 10.1016/j.solmat.2013.09.00710.1016/j.solmat.2013.09.007 ↗
21. 10.1002/adma.20110087110.1002/adma.201100871 ↗
22. 10.1002/aenm.20130010010.1002/aenm.201300100 ↗
23. 10.1002/polb.2375410.1002/polb.23754 ↗
24. 10.1016/j.jlumin.2017.03.00210.1016/j.jlumin.2017.03.002 ↗
25. 10.1016/j.orgel.2016.12.05910.1016/j.orgel.2016.12.059 ↗
26. 10.1016/j.polymer.2004.10.00110.1016/j.polymer.2004.10.001 ↗
27. 10.1021/cm061032+10.1021/cm061032+ ↗
28. 10.1039/c2ee02806a10.1039/c2ee02806a ↗
29. 10.1039/b815523b10.1039/b815523b ↗
30. 10.1016/j.synthmet.2011.09.03110.1016/j.synthmet.2011.09.031 ↗
31. 10.1016/j.solmat.2012.10.02310.1016/j.solmat.2012.10.023 ↗
32. Kim Y. H. , “Alternative Electrodes for Organic Optoelectronic Devices,” Dresden University of Technology, 2013.
33. 10.1002/adma.20130472510.1002/adma.201304725 ↗
34. Green M. A. , Solar cells: operating principles, technology, and system applications, Prentice-Hall, Inc., Englewood Cliffs, NJ, 1982.