Environmentally Friendly Lithium-Terephthalate/Polylactic Acid Composite Filament Formulation for Lithium-Ion Battery 3D-Printing via Fused Deposition Modeling
Source abstract
Abstract
In this paper, the development of an environmentally-friendly lithium-terephtalate/polylactic acid (Li2TP/PLA) composite filament, for its use, once 3D-printed via Fused Deposition Modeling (FDM), as negative electrode of a lithium-ion battery is reported. Solvent-free formulation of the 3D-printable filament is achieved through the direct introduction of synthesized Li2TP particles and PLA polymer powder within an extruder. Printability is improved through the incorporation of poly(ethylene glycol) dimethyl ether average Mn∼500 (PEGDME500) as plasticizer, while electrical performances are enhanced through the introduction of carbon black (CB). Thermal, electrical, morphological, electrochemical and printability characteristics are discussed thoroughly. By taking advantage of the 3D-printing slicer software capabilities, an innovative route is proposed to improve the liquid electrolyte impregnation within the 3D-printed electrodes.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · biodegradable polymer synthesis and properties · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. 3D-printing of redox flow batteries for energy storage: a rapid prototype laboratory cell10.1149/2.0141504jss ↗
2. Vanadium redox flow batteries fabricated by 3D printing and employing recycled vanadium collected from ammonia slag10.1149/2.0251909jes ↗
3. Evolution of 3D printing methods and materials for electrochemical energy storage10.1002/adma.202000556 ↗
4. Additive manufacturing for energy storage: methods, designs and material selection for customizable 3D printed batteries and supercapacitors10.1016/j.coelec.2020.02.009 ↗
5. 3D printing for electrochemical energy applications10.1021/acs.chemrev.9b00783 ↗
6. 3D printable vapochromic sensing materials10.1149/1945-7111/abc99e ↗
7. Three-dimensional printing of a LiFePO4/graphite battery cell via fused deposition modeling10.1038/s41598-019-54518-y ↗
8. Towards smart free form-factor 3D printable batteries10.1039/C8SE00122G ↗
9. Considering lithium-ion battery 3D-printing via thermoplastic material extrusion and polymer powder bed fusion10.1016/j.addma.2020.101651 ↗
10. Three-dimensional printing of a complete lithium ion battery with fused filament fabrication10.1021/acsaem.8b00885 ↗
11. Highly loaded graphite-polylactic acid composite-based filaments for lithium-ion battery three-dimensional printing10.1021/acs.chemmater.8b02062 ↗
12. Poly(Ethylene Oxide)-LiTFSI solid polymer electrolyte filaments for fused deposition modeling three-dimensional printing10.1149/1945-7111/ab7c38 ↗
13. On the road to a multi-coaxial-cable battery: development of a novel 3d-printed composite solid electrolyte10.1149/2.0032007JES ↗
14. Energy density lithium/dichloroisocyanuric acid battery system10.1149/1.2411755 ↗
15. Towards sustainable and versatile energy storage devices: an overview of organic electrode materials10.1039/c3ee40709h ↗
16. Recent progress on organic electrodes materials for rechargeable batteries and supercapacitors10.3390/ma12111770 ↗
17. Organic small molecules and polymers as an electrode material for rechargeable lithium ion batteries10.1039/C8TA04906H ↗
18. Opportunities and challenges for organic electrodes in electrochemical energy storage10.1021/acs.chemrev.9b00482 ↗
19. Towards sustainable and renewable systems for electrochemical energy storage10.1002/cssc.200800143 ↗
20. Conjugated dicarboxylate anodes for Li-ion batteries10.1038/nmat2372 ↗
21. Poly(ethylene terephthalate) recycling and recovery of pure terephthalic acid. Kinetics of a phase transfer catalyzed alkaline hydrolysis10.1002/1439-2054(20011001)286:10<640::AID-MAME640>3.0.CO;2-1 ↗
22. Degradation of waste poly(ethylene terephthalate) in a steam atmosphere to recover terephthalic acid and to minimize carbonaceous residue10.1016/S0141-3910(97)00086-4 ↗
23. A study on the biodegradability of polyethylene terephthalate fiber and diethylene glycol terephthalate10.1002/app.20556 ↗
24. Biological recycling of polyethylene terephthalate: a mini-review10.1007/s10924-018-1214-7 ↗
25. Material flow analysis of polyethylene terephthalate in the US, 1996-200710.1016/j.resconrec.2010.03.013 ↗
26. Polyester fibres continue to dominate on the world textile raw materials balance sheet10.1007/s10692-009-9119-9 ↗
27. Decreasing redox voltage of terephthalate-based electrode material for Li-ion battery using substituent effect10.1016/j.jpowsour.2017.05.046 ↗
28. Substituent effect on redox potential of terephthalate-based electrode materials for lithium batteries10.1016/j.elecom.2018.06.009 ↗
29. Sodium terephthalate as an organic anode material for sodium ion batteries10.1002/adma.201201205 ↗
30. Atomic layer deposition of Al2O3 on organic potassium terephthalate with enhanced K-storage behavior for K-ion batteries10.1007/s11581-019-03434-2 ↗
31. Overview on lithium-ion battery 3D-Printing By means of material extrusion10.1149/09813.0003ecst ↗
32. Maurel · 2020
33. Effect of polyethylene glycol on the crystallization and impact properties of polylactide-based blends10.1002/pat.3475 ↗
34. Development of multi-material 3D printer10.1149/08801.0449ecst ↗