Study of Agglomeration Behavior of Chemical Mechanical Polishing Slurry under Controlled Shear Environments
Source abstract
Abstract
The presence of large oversize particles (>0.5 μm) in the slurry is known to cause polishing defects during chemical mechanical planarization/polishing (CMP) process. One of the reasons for presence of large particles in the slurry is due to usage of pumps during slurry delivery. The shear rate of pumps is known to cause agglomeration problem in CMP slurries, with increasing shear rate leading to increase in agglomeration in the slurries. However, till now all the work on shear-induced agglomeration has been qualitative or at best semi-quantitative in nature. In the present work, a novel technique to study agglomeration behavior as a function of quantified shear rates has been developed. A rheometer was used as a means to subject slurry to different shear rates for various times. The resulting change in oversize particle distribution was measured using a single particle optical sensing (SPOS) system. It was observed that the behavior of silica slurry when subjected to different shear rates falls into three regions namely de-agglomeration, transition region and agglomeration region. This technique provides a deterministic way for slurry stability and can be used as a guide for design of slurry, slurry selection and design of slurry delivery systems.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. 10.1149/1.139393110.1149/1.1393931 ↗
2. 10.1116/1.163495810.1116/1.1634958 ↗
3. “Interconnect,” International Technology Roadmap for Semiconductors, pp. 1, 2007.10.1109/ICEPT.2007.4441555 ↗
4. International Technology Roadmap for Semiconductors, 2013, http://www.itrs2.net/2013-itrs.html/Tables/FEP_2013Tables.xlsx/TableFEP13.
5. “Interconnect,” International Technology Roadmap for Semiconductors, pp. 1, 2002.
6. 10.1149/1.208543410.1149/1.2085434 ↗
7. 10.1149/1.139074110.1149/1.1390741 ↗
8. 10.1149/1.139085110.1149/1.1390851 ↗
9. Singh R. K. Bajaj R. Moinpour M. Meuris M. , Chemical-Mechanical Polishing 2000 - Fundamentals and Materials Issues, vol. 613, 2001.10.1557/PROC-613-E1.4.1 ↗
10. BIelmann M. Mahajan Y. Singh R. K. Agarwal P. Mischler S. Rosset E. Landolt D. , Chemical- Mechanical Polishing - Fundamentals and Challenges, vol. 566. Warrendale, PA., 2000.10.1557/PROC-566-97 ↗
11. Lee S.-M. Choi W. Craciun V. Jung S.-H. Singh R. K. , “Electrochemical Measurements to Understand the Dynamics of the Chemically Modified Surface Layer Formation During Copper CMP,” presented at Materials Research Society, San Francisco, CA, April 2002.
12. 10.1149/1.183834110.1149/1.1838341 ↗
13. 10.1149/2.0241503jss10.1149/2.0241503jss ↗
14. Litchy M. Schoeb R. , “Effect of Shear Stress and Pump Methods on CMP Slurry”, https://www.levitronix.com/en/technical-papers.html
15. 10.1149/1.300577810.1149/1.3005778 ↗
16. Chang F. C. , “Externally Induced Agglomeration During Chemical Mechanical Polishing of Metals and Dielectrics,” in Materials Science & Engineering, vol. Ph.D. Gainesville, Florida: University of Florida, pp. 1 2008.
17. Paar P. , “Rheometer UDS 200 Manual.”
18. 10.1006/jcis.2002.835210.1006/jcis.2002.8352 ↗
19. 10.1149/1.218403610.1149/1.2184036 ↗
20. 10.1002/ppsc.20090008110.1002/ppsc.200900081 ↗
21. 10.1016/j.colsurfa.2013.06.00310.1016/j.colsurfa.2013.06.003 ↗
22. Elimelech T. M. Gregory J. Jia X. A W. R. , “Particle Deposition and Aggregation - Measurement, Modelling and Simulation,” Elsevier, 1998.
23. Camp R. , “Flocculation and flocculation basins,” presented at ASCE, 1953.
24. Stechemesser H. Dobias B. , Coagulation and Flocculation, Second ed. Boca Raton: CRC Press, Taylor and Francis Group, 2005.10.1201/9781420027686 ↗
25. 10.1252/jcej.15.29910.1252/jcej.15.299 ↗