Selection and Optimization of Corrosion Inhibitors for Improved Cu CMP and Post-Cu CMP Cleaning
Source abstract
Abstract
Corrosion inhibitors play a key role in obtaining global planarization and protecting against corrosion during copper CMP. However, these inhibitors leave organic residues and increase particle contamination after the CMP process, which can directly affect the device yield. Cu CMP is usually performed with a slurry containing silica particles and a BTA corrosion inhibitor. High levels of organic defects and particle contamination are produced due to the high concentration of BTA used to meet CMP requirements. In this work a suitable corrosion inhibitor, 5-methyl-benzotriazole (MBTA), is proposed and used at an optimized concentration to remove organic residues and particle contamination effectively during the post-CMP process. The optimum inhibitor concentration was estimated for BTA and MBTA. Based on etching and EIS studies, it was found that a lower concentration of MBTA (relative to BTA) is needed to provide the conditions required for CMP. The passivation layer formed by MBTA can be removed easily during the post-CMP process. Thus, our results indicate that it is possible to reduce the concentration of the inhibitor while maintaining the same corrosion inhibition efficiency, thereby reducing the particle and organic defect levels.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Copper Interconnects and Reliability · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. 10.1002/sia.575510.1002/sia.5755 ↗
2. 10.1016/j.surfcoat.2014.01.00510.1016/j.surfcoat.2014.01.005 ↗
3. 10.7567/JJAP.54.07650210.7567/JJAP.54.076502 ↗
4. 10.1021/cr900170z10.1021/cr900170z ↗
5. 10.7567/JJAP.53.03140210.7567/JJAP.53.031402 ↗
6. 10.1179/00070596779832723510.1179/000705967798327235 ↗
7. 10.1016/S0013-4686(98)00367-310.1016/S0013-4686(98)00367-3 ↗
8. 10.1016/j.apsusc.2008.01.16510.1016/j.apsusc.2008.01.165 ↗
9. 10.1116/1.57670810.1116/1.576708 ↗
10. 10.1149/1.208595710.1149/1.2085957 ↗
11. 10.1007/s10800-009-9779-410.1007/s10800-009-9779-4 ↗
12. Cotton JB , Proceedings of the 2nd Inter. Congress on Metallic Corrosion, New York, 590 (1963).
13. 10.1007/s10008-005-0014-x10.1007/s10008-005-0014-x ↗
14. 10.5006/1.327756310.5006/1.3277563 ↗
15. 10.1016/S0010-938X(98)00191-710.1016/S0010-938X(98)00191-7 ↗
16. Alkharafi · Int. J. Electrochem. Sci · 2009 · 4 · 135110.1016/S1452-3981(23)15228-X ↗
17. 10.1007/s11665-016-2474-910.1007/s11665-016-2474-9 ↗
18. 10.1002/app.4601110.1002/app.46011 ↗
19. Antonijevic · Int. J. Electrochem. Sci · 2008 · 3 · 110.1016/S1452-3981(23)15441-1 ↗
20. 10.1016/S1003-6326(13)62751-X10.1016/S1003-6326(13)62751-X ↗
21. 10.1149/1.140940010.1149/1.1409400 ↗
22. 10.1016/j.mee.2014.02.03410.1016/j.mee.2014.02.034 ↗
23. 10.1149/2.014211jes10.1149/2.014211jes ↗
24. 10.7567/JJAP.55.06JB0110.7567/JJAP.55.06JB01 ↗
25. 10.1016/j.apsusc.2016.05.10610.1016/j.apsusc.2016.05.106 ↗
26. 10.1016/j.cej.2009.05.02010.1016/j.cej.2009.05.020 ↗
27. 10.1149/1.189078610.1149/1.1890786 ↗
28. 10.1016/j.mee.2007.12.04410.1016/j.mee.2007.12.044 ↗
29. 10.1149/1.239301510.1149/1.2393015 ↗
30. 10.1023/A:101750303104510.1023/A:1017503031045 ↗
31. 10.1016/j.corsci.2008.04.01610.1016/j.corsci.2008.04.016 ↗
32. 10.1016/S0009-2614(98)00058-X10.1016/S0009-2614(98)00058-X ↗
33. 10.1016/S0039-6028(98)00604-910.1016/S0039-6028(98)00604-9 ↗
34. 10.1016/j.mee.2012.04.00610.1016/j.mee.2012.04.006 ↗
35. 10.1016/j.mee.2004.06.00610.1016/j.mee.2004.06.006 ↗
36. 10.1149/1.277941010.1149/1.2779410 ↗