journal article·2022-11-01

Synergetic Effect of CeO 2 Doping on Structural and Tribological Behavior of Fe-Al 2 O 3 Metal Matrix Nanocomposites

Pallav Gupta, Naseem Ahamad, Devendra Kumar, Niraj Gupta, Vijay Chaudhary, Sumit Gupta, Virat Khanna, Vishal Chaudhary

Publisher page

Abstract

Cerium oxide (CeO 2 ) doped iron (Fe) - alumina (Al 2 O 3 ) Metal Matrix Nanocomposites have been studied in this article. Doped with 0.5 and 1.0 percent CeO 2 , the nanocomposites in this system were made in the lab. Weighing, Powder milling, die pressing, and sintering at 1100 °C for one hour in an atmosphere-controlled furnace were used to develop the specimens. Microstructural inspection of a worn-out surface on the prepared specimens was carried out in addition to the phase determination and microstructural assessment that were performed on the fabricated specimens. Fe, Al 2 O 3 , CeO 2 , and FeAl 2 O 4 phases were all seen in the XRD data. There were nano dispersion of FeAl 2 O 4 and CeO 2 particles in the dense phase microstructure of the produced samples. Increasing the amount of cerium oxide in the material resulted in an increase in both density and hardness. The specimen’s wear rate was shown to decrease with an increase in cerium oxide content %. The present developed material will be useful for heavy duty applications like railway wagon wheels.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Tribology and Wear Analysis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Amity University Uttar Pradesh

Department of Mechanical Engineering, College of Engineering & Technology, IILM Academy of Higher Learning, Greater Noida,

Banaras Hindu University

Shri Ramswaroop Memorial University

Maharaja Agrasen University

University of Delhi

References (28)

Show source-provided references
1. Structural and mechanical behaviour of 5% Al2O3-reinforced Fe metal matrix composites (MMCs) produced by powder metallurgy (P/M) route10.1007/s12034-013-0545-1 ↗
2. Investigation of mechanical properties of fe-based metal matrix composites by warm compaction for gear production10.12693/APhysPolA.131.443 ↗
3. Sintering and hardness behavior of Fe-Al2O3 metal matrix nanocomposites prepared by powder metallurgy10.1155/2014/145973 ↗
4. Abrasive wear of FeCr (M7C3–M23C6) reinforced iron based metal matrix composites10.1179/026708301101509214 ↗
5. Microstructural evolution of iron based metal–matrix composites submitted to simple shear10.1016/j.msea.2014.08.004 ↗
6. Improved toluene response of mixed-potential type YSZ-based gas sensors using CeO2-added au electrodes10.1149/2754-2726/ac63d2 ↗
7. Review—Towards 5th generation AI and IoT driven sustainable intelligent sensors based on 2D MXenes and borophene10.1149/2754-2726/ac5ac6 ↗
8. Review—recent advances of electrochemical techniques in food, energy, environment, and forensic application10.1149/2754-2726/ac5cdf ↗
9. Review—3D printing: an innovative trend in analytical sensing10.1149/2754-2726/ac5c7a ↗
10. Tribology characteristics of ex situ and in situ tungsten carbide particles reinforced iron matrix composites produced by spark plasma sintering10.1016/j.jallcom.2017.02.003 ↗
11. Friction and wear maps of copper metal matrix composites with different iron volume content10.1016/j.triboint.2018.11.027 ↗
12. A novel iron matrix composite fabricated by two-step in situ reaction: Microstructure, formation mechanism and mechanical properties10.1016/j.jallcom.2020.157442 ↗
13. Microstructure and mechanical properties of iron-containing titanium metal-metal composites10.1016/j.ijrmhm.2020.105225 ↗
14. Effect of Sintering Mechanism on the Properties of ZrO2 Reinforced Fe Metal Matrix Nanocomposite10.1155/2015/456353 ↗
15. Synthesis and characterization of Fe–ZrO2 metal matrix composites10.1177/0021998313494915 ↗
16. A study on microstructure and mechanical properties of aluminium matrix composites with micro-sized iron fillers produced by powder metallurgy route10.1016/j.matpr.2020.03.733 ↗
17. Hydrothermal carbon effect on iron matrix composites produced by powder metallurgy10.1016/j.matchemphys.2019.122557 ↗
18. Electrochemical detection of H2O2 using an activated glassy carbon electrode10.1149/2754-2726/ac7c78 ↗
19. Effects of surface modification of platinum electrodes with gold on hydrogen-sensing properties of diode-type sensors10.1149/2754-2726/ac5b9f ↗
20. Multimodal single-entity electrochemical fluoride sensor for fuel cell membrane degradation diagnostics10.1149/2754-2726/ac8aa8 ↗
21. Potentiometric analysis of benzalkonium chloride with 3D printed ion-selective membranes10.1149/2754-2726/ac8438 ↗
22. Detection of Methylparaben in cosmetics by poly L–Lysine/reduced graphene oxide-based sensor10.1149/2754-2726/ac8aa7 ↗
23. Review —an overview on recent progress in screen-printed electroanalytical (bio)sensors10.1149/2754-2726/ac70e2 ↗
24. Perspective— powerful micro/nano-scale heat engine: thermoelectric converter on chip10.1149/2754-2726/ac7534 ↗
25. Thermal monitoring of series and parallel connected lithium-ion battery modules using fiber optic sensors10.1149/2754-2726/ac7abd ↗
26. Fabrication of MWCNTs reinforced iron metal matrix composite by powder metallurgy: Effects of wet and dry milling10.1016/j.jallcom.2021.159688 ↗
27. Wear, optimization and surface analysis of Al-Al2O3-TiO2 hybrid metal matrix composites10.1177/1350650120970432 ↗
28. Integrated fuzzy AHP and fuzzy TOPSIS methods for multi-objective optimization of electro discharge machining process10.1007/s00500-018-3173-2 ↗