Investigation of the Electrical Properties of Polymer/Carbon Composites Exposed to Joule Heating and Heat Treatment
Source abstract
Abstract
The bipolar plates are the essential part of Proton Exchange Membrane (PEM) fuel cells made of polymer-based-carbon composite or coated metallic materials. The composite type of bipolar plates has different microstructural and electrical properties that can considerably change under the operating conditions because of exposing to the high body temperature of the fuel cell and flowing the electric current from the parts named joule-heating effect. In this research, the different types of composites, containing phenolic resin as matrix and carbon fiber, graphite, and expanded graphite as filler, have been manufactured. The structural and electrical properties have been investigated by performing the heat-treatment (in three temperatures of 50, 100, and 150°C) and joule-heating effect (in three induced powers 1.5, 5, and 10 W) tests. Here, the effect of time has been investigated too. Finally, SEM and optical microscopes, as well as DSC-TGA, electrical conductivity, and performance analyses are used for characterization. The results of electrical conductivity of different composites in the heat-treatment and joule heating effect tests showed that some of composite have a positive and some of them show negative temperature coefficient of resistivity.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advanced Battery Technologies Research · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (86)
Show source-provided references
1. 10.1149/2.023406jss10.1149/2.023406jss ↗
2. Taherian R. , Manufacture, test, modeling of polymer-based nanocomposite utilized in bipolar plate of PEM fuel cell, in Material engineering. 2012, Shiraz university: Shiraz university. 246.
3. 10.1016/j.jpowsour.2014.04.08110.1016/j.jpowsour.2014.04.081 ↗
4. Taherian R. , The effect of ohmic resistances and clamping pressure on the performance of proton exchange membrane fuel cell in 7th International Chemical Engineering Congress and Exhibition 2011: Kish, Iran.
5. 10.1016/j.matdes.2011.02.05910.1016/j.matdes.2011.02.059 ↗
6. 10.1016/j.matdes.2013.01.05810.1016/j.matdes.2013.01.058 ↗
7. 10.1002/app.3829510.1002/app.38295 ↗
8. 10.1149/2.005206jss10.1149/2.005206jss ↗
9. Taherian R. Hadinfard M. J. Nozad A. . G, manufacture polymer based nanocomposite bipolar plate of PEM fuel cell, in Invention establish office of Iran I.r. office, Editor. 2012, Shiraz University: Iran.
10. 10.1016/j.jmatprotec.2006.05.00310.1016/j.jmatprotec.2006.05.003 ↗
11. 10.1016/j.egypro.2012.03.03110.1016/j.egypro.2012.03.031 ↗
12. 10.1002/fuce.20100003310.1002/fuce.201000033 ↗
13. 10.1021/ma071687b10.1021/ma071687b ↗
14. 10.1016/j.jpowsour.2005.04.04110.1016/j.jpowsour.2005.04.041 ↗
15. 10.1016/j.progpolymsci.2004.08.00110.1016/j.progpolymsci.2004.08.001 ↗
16. 10.1016/j.polymer.2010.09.00710.1016/j.polymer.2010.09.007 ↗
17. Hu N. Masuda Z. Fukunaga H. . Prediction of Electrical Conductivity of Polymer Filled by Carbon Nanotubes. in Proceedings of the 16th International Conference on Composite Materials. 2007. Kyoto, Japan.
18. 10.1016/j.compscitech.2005.12.03310.1016/j.compscitech.2005.12.033 ↗
19. 10.1016/j.jpowsour.2006.06.07610.1016/j.jpowsour.2006.06.076 ↗
20. 10.1016/j.jpowsour.2009.08.03310.1016/j.jpowsour.2009.08.033 ↗
21. Askeland D. R. Fulay P. P. Wright W. J. , The Science and Engineering of Materials. Sixth ed. 2011, United States of America: Cengage Learning.
22. 10.1016/S0032-3861(99)00894-010.1016/S0032-3861(99)00894-0 ↗
23. study on theories and influence factors of PTC property in polymer-based conductive composites
24. Kohler F. , Resistance element, U. Pat., Editor. 1966: USA. 3.
25. FRYDMAN E. , U.K.P. Spec., Editor. 1948: U .K.
26. 10.1143/JJAP.10.9910.1143/JJAP.10.99 ↗
27. 10.1002/mame.20070022810.1002/mame.200700228 ↗
28. 10.1007/BF0034904110.1007/BF00349041 ↗
29. 10.1002/pen.76013061110.1002/pen.760130611 ↗
30. 10.1002/app.1975.07019031910.1002/app.1975.070190319 ↗
31. 10.5254/1.353579610.5254/1.3535796 ↗
32. 10.1016/0014-3057(96)00026-210.1016/0014-3057(96)00026-2 ↗
33. 10.1002/pen.1150710.1002/pen.11507 ↗
34. 10.1002/app.1312710.1002/app.13127 ↗
35. 10.1016/j.surfcoat.2010.08.00510.1016/j.surfcoat.2010.08.005 ↗
36. 10.1016/j.polymer.2012.08.06510.1016/j.polymer.2012.08.065 ↗
37. 10.1103/PhysRevLett.40.119710.1103/PhysRevLett.40.1197 ↗
38. 10.1002/polb.1076610.1002/polb.10766 ↗
39. 10.1002/pen.2307210.1002/pen.23072 ↗
40. 10.1016/j.radphyschem.2014.10.00310.1016/j.radphyschem.2014.10.003 ↗
41. 10.1016/j.carbon.2004.02.02710.1016/j.carbon.2004.02.027 ↗
42. 10.1016/S0008-6223(01)00173-710.1016/S0008-6223(01)00173-7 ↗
43. 10.1016/j.jiec.2013.03.01910.1016/j.jiec.2013.03.019 ↗
44. 10.1016/j.polymer.2014.10.06410.1016/j.polymer.2014.10.064 ↗
45. 10.1016/j.eurpolymj.2014.11.03210.1016/j.eurpolymj.2014.11.032 ↗
46. 10.1126/science.278.5336.26410.1126/science.278.5336.264 ↗
47. 10.1063/1.153673310.1063/1.1536733 ↗
48. 10.1016/j.carbon.2010.08.04110.1016/j.carbon.2010.08.041 ↗
49. 10.1016/j.polymer.2009.05.05910.1016/j.polymer.2009.05.059 ↗
50. 10.1063/1.307978910.1063/1.3079789 ↗
51. 10.1007/s10853-014-8198-z10.1007/s10853-014-8198-z ↗
52. 10.1007/12_2006_10410.1007/12_2006_104 ↗
53. 10.1016/j.compositesa.2013.10.02410.1016/j.compositesa.2013.10.024 ↗
54. McNally T. Pötschke P. , Polymer–carbon nanotube composites, Preparation, properties and applications. 2011, USA: Woodhead Publishing.10.1016/B978-1-84569-761-7.50029-0 ↗
55. 10.1002/(SICI)1097-4628(19970328)63:13<1741::AID-APP5>3.0.CO;2-G10.1002/(SICI)1097-4628(19970328)63:13<1741::AID-APP5>3.0.CO;2-G ↗
56. 10.1016/S0032-3861(03)00539-110.1016/S0032-3861(03)00539-1 ↗
57. 10.1016/j.compscitech.2012.07.00910.1016/j.compscitech.2012.07.009 ↗
58. 10.1016/j.matlet.2008.03.05310.1016/j.matlet.2008.03.053 ↗
59. 10.1002/marc.20090051410.1002/marc.200900514 ↗
60. The buildup and measurement of molecular orientation, crystalline morphology, and residual stresses in injection molded parts: a review
61. 10.1007/BF0137409110.1007/BF01374091 ↗
62. 10.1016/j.polymer.2011.10.06310.1016/j.polymer.2011.10.063 ↗
63. 10.1002/app.2993010.1002/app.29930 ↗
64. 10.1126/science.272.5261.52310.1126/science.272.5261.523 ↗
65. 10.1016/S0008-6223(99)00291-210.1016/S0008-6223(99)00291-2 ↗
66. 10.1143/JJAP.44.424510.1143/JJAP.44.4245 ↗
67. 10.1115/1.400350310.1115/1.4003503 ↗
68. Carter R. L. B. , “development and modeling of electrically conductive reins for fuel cell bipolar plate applications,” in Chemical Engineering, in Chemical Engineering. 2008, Michigan: Michigan.
69. 10.1016/S1359-835X(02)00181-110.1016/S1359-835X(02)00181-1 ↗
70. 10.1016/j.carbon.2010.12.00110.1016/j.carbon.2010.12.001 ↗
71. 10.1016/S0266-3538(00)00183-410.1016/S0266-3538(00)00183-4 ↗
72. 10.1016/0010-4361(92)90439-210.1016/0010-4361(92)90439-2 ↗
73. 10.1016/j.carbon.2008.09.03910.1016/j.carbon.2008.09.039 ↗
74. 10.1016/j.carbon.2009.03.03910.1016/j.carbon.2009.03.039 ↗
75. 10.1016/j.compscitech.2015.11.02910.1016/j.compscitech.2015.11.029 ↗
76. 10.1063/1.161663810.1063/1.1616638 ↗
77. 10.1016/j.carbon.2011.01.05310.1016/j.carbon.2011.01.053 ↗
78. 10.1016/j.compscitech.2015.04.00710.1016/j.compscitech.2015.04.007 ↗
79. 10.1016/j.cplett.2009.02.00810.1016/j.cplett.2009.02.008 ↗
80. 10.1016/S0266-3538(03)00019-810.1016/S0266-3538(03)00019-8 ↗
81. 10.1016/j.snb.2008.04.02110.1016/j.snb.2008.04.021 ↗
82. 10.1016/j.carbon.2012.10.04110.1016/j.carbon.2012.10.041 ↗
83. 10.1016/j.compscitech.2010.08.00710.1016/j.compscitech.2010.08.007 ↗
84. 10.1016/j.polymer.2011.10.06310.1016/j.polymer.2011.10.063 ↗
85. 10.1007/BF0035779910.1007/BF00357799 ↗
86. 10.1039/C5TA04609B10.1039/C5TA04609B ↗