journal article·2021-07-01

Two-Step Chemical Mechanical Polishing of 4H-SiC (0001) Wafer

Weilei Wang, Weili Liu, Zhitang Song

Publisher page

Abstract

Chemical mechanical polishing (CMP), as a widely used global smoothing technique, requires a high polishing rate and a low surface roughness. However, it is difficult to meet these requirements with single-step polishing. To obtain a perfect 4H-SiC wafer surface, we studied a two-step CMP 4H-SiC wafer using a-Al 2 O 3 -based slurry and nano-SiO 2 -based slurry. Before the two-step process was determined, the effect of concentration of KMnO 4 and pH on the polishing rate of 4H-SiC was first studied with Al 2 O 3 as the abrasive, and the maximum polishing rate of 1400 nm h −1 was determined under the condition of pH of 2.00 and KMnO 4 concentration of 6.5 wt% in the step. Furthermore, the effect of H 2 O 2 concentration on the polishing rate of 4H-SiC was investigated using SiO 2 as the abrasive and V 2 O 5 as the catalyst. It was determined that under the condition of V 2 O 5 concentration of 4 wt% and H 2 O 2 concentration of 10 wt%, the maximum polishing rate of the second step polishing was 150 nm h −1 , and a perfect surface was obtained, with a surface roughness of 0.066 nm. In addition, the in situ friction coefficients have used to characterize the two-step process. At the end, the CMP mechanisms of the above two slurry have been deduced and preliminarily demonstrated.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Casady · Solid-State Electron. · 1996 · 39 · 140910.1016/0038-1101(96)00045-7 ↗
2. Slack · J. Appl. Phys. · 1964 · 35 · 346010.1063/1.1713251 ↗
3. Konstantinov · Appl. Phys. Lett. · 1997 · 71 · 9010.1063/1.119478 ↗
4. Jarasiunas · Mater. Sci. Forum · 2015 · 717 · 30910.4028/www.scientific.net/MSF.717-720.309 ↗
5. Qin · Thin Solid Films · 2004 · 446 · 27710.1016/j.tsf.2003.09.060 ↗
6. Luo · IEEE Trans. Semicond. Manuf. · 2001 · 14 · 11210.1109/66.920723 ↗
7. Yin · 2012
8. Kurokawa · MRS Online Proc. · 2013 · 301 · 156010.1557/opl.2013.903 ↗
9. Zhou · Surf. Coat. Technol. · 2014 · 251 · 4810.1016/j.surfcoat.2014.03.044 ↗
10. Zhang · Appl. Mech. Mater. · 2015 · 727 · 24410.4028/www.scientific.net/AMM.727-728.244 ↗
11. Kido · Mater. Sci. Forum · 2014 · 778 · 75410.4028/www.scientific.net/MSF.778-780.754 ↗
12. Su · J. Semicond. · 2012 · 33 · 14210.1088/1674-4926/33/10/106003 ↗
13. Zhang · J. Electrochem. Soc. · 2010 · 157 · H68810.1149/1.3410116 ↗
14. Yang · 2005
15. Currie · Appl. Phys. Lett. · 1998 · 72 · 171810.1063/1.121162 ↗
16. Luo · Thin Solid Films · 1998 · 335 · 16010.1016/S0040-6090(98)00896-7 ↗
17. Kim · Journal of the Korean Institute of Electrical and Electronic Material Engineers · 2014 · 17 · 104910.4313/JKEM.2004.17.10.1049 ↗
18. Li · J. Electrochem. Soc. · 2005 · 152 · G29910.1149/1.1869974 ↗
19. Yamada · J. Electrochem. Soc. · 2010 · 157 · H61710.1149/1.3368700 ↗
20. Chen · Appl. Surf. Sci. · 2015 · 359 · 66410.1016/j.apsusc.2015.10.158 ↗
21. Bell · Science · 1963 · 142 · 359510.1126/science.142.3595.1051 ↗
22. Ogata · Can. J. Chem. · 1982 · 60 · 84810.1139/v82-128 ↗
23. Nizova · Chem. Commun. · 1998 · 17 · 1710.1039/A804699I ↗
24. Shul’Pina · Pombeiro. Tetrahedron · 2009 · 65 · 242410.1016/j.tet.2009.01.088 ↗
25. Jagtap · Mater. Sci. Eng. · 2010 · 168 · 19910.1016/j.mseb.2010.01.016 ↗
26. Krasnenko · Russ. J. Inorg. Chem. · 2008 · 53 · 148910.1134/S0036023608090234 ↗