journal article·2022-12-01

Engineering Electrical and Thermal Attributes of Two-Dimensional Graphene Reinforced Copper/Aluminium Metal Matrix Composites for Smart Electronics

Virat Khanna, Kamaljit Singh, Santosh Kumar, Suneev Anil Bansal, Manjunatha Channegowda, Ing Kong, Mohammad Khalid, Vishal Chaudhary

Publisher page

Abstract

Rising demands for reliable thermally and electrically conductive and stable, lightweight, and mechanically enduring materials in architecting smart electronics have accelerated the research in engineering metal-matrix composites (MMCs). Amongst all, copper (Cu) and aluminium (Al) based MMCs are popular owing to high electrical conductivity, but large heat dissipation in compact electronic gadgets is still challenging. The reinforcement of Cu/Al with graphene caters to problems of heat dissipation, strengthens mechanical endurance, and optimizes electronic and thermal conductivities as per the device architect and application. The present report systematically reviews the state-of-the-art Cu/Al MMCs using graphene reinforcement with enhanced electrical, thermal and mechanical attributes for smart electronics manufacturing. It discusses the fundamentals for optimising the electrical and thermal charge transport in Cu/Al MMCs through graphene reinforcement. Besides it discusses challenges, alternate solutions, and advanced prospects of graphene reinforced Cu/Al MMCs for smart electronics manufacturing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Electromagnetic wave absorption materials · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Synthesis of nanodiamond-reinforced aluminum metal matrix composites using cold-spray deposition10.1016/j.carbon.2015.01.010 ↗
2. Mechanical properties of nanodiamond and multi-walled carbon nanotubes dual-reinforced aluminum matrix composite materials10.1016/j.msea.2015.02.057 ↗
3. Review—towards 5th generation AI and IoT driven sustainable intelligent sensors based on 2D MXenes and borophene10.1149/2754-2726/ac5ac6 ↗
4. Graphene-based heat spreader for flexible electronic devices10.1109/TED.2014.2364606 ↗
5. Effect of reinforcing graphene nanoplatelets (GNP) on the strength of aluminium (Al) metal matrix nanocomposites10.1016/j.matpr.2021.09.227 ↗
6. Small percentage reinforcement of carbon nanotubes (CNTs) in epoxy(bisphenol-A) for enhanced mechanical performance10.1016/j.matpr.2021.09.225 ↗
7. Microstructure and properties of silver matrix composites reinforced with Ag-doped graphene10.1016/j.matchemphys.2018.05.036 ↗
8. Mechanical properties of aluminium-graphene/carbon nanotubes (CNTs) metal matrix composites: advancement, opportunities and perspective10.1016/j.materresbull.2021.111224 ↗
9. Thermal monitoring of series and parallel connected lithium-ion battery modules using fiber optic sensors10.1149/2754-2726/ac7abd ↗
10. Graphene platelet reinforced copper composites for improved tribological and thermal properties10.1039/C9RA07962A ↗
11. Aluminium-carbon fibre metal matrix composites: a review10.1088/1757-899X/1033/1/012057 ↗
12. Review–a survey of learning from noisy labels10.1149/2754-2726/ac75f5 ↗
13. Review—electrochemistry and other emerging technologies for continuous glucose monitoring devices10.1149/2754-2726/ac7abb ↗
14. Thermal properties of graphene/metal composites with aligned graphene10.1016/j.matdes.2017.11.048 ↗
15. Low-trace monitoring of airborne sulphur dioxide employing SnO2-CNT hybrids-based energy-efficient chemiresistor10.1016/j.jmrt.2022.07.159 ↗
16. On the disinfection of electrochemical aptamer-based sensors10.1149/2754-2726/ac60b2 ↗
17. Thermal conductivity of copper-graphene composite films synthesized by electrochemical deposition with exfoliated graphene platelets10.1007/s11663-011-9597-z ↗
18. Choice—review—3D printing: an innovative trend in analytical sensing10.1149/2754-2726/ac5c7a ↗
19. A paradigm of Internet-of-nano-things inspired intelligent plant pathogen-diagnostic biosensors10.1149/2754-2726/ac92ed ↗
20. Progress and challenges in transfer of large‐area graphene films10.1002/advs.201500343 ↗
21. Transfer methods of graphene from metal substrates: a review10.1002/smtd.201900049 ↗
22. Effect of hybrid reinforcements on the mechanical properties of copper nanocomposites10.1149/2162-8777/ac8bf9 ↗
23. Additive manufacturing high performance graphene-based composites: a review10.1016/j.compositesa.2019.105483 ↗
24. Current developments in machining of titanium based alloys using wire EDM10.2174/9789811483653120010009 ↗
25. A review of processing techniques for graphene-reinforced metal matrix composites10.1080/10426914.2019.1615080 ↗
26. Sustainability of microwave heating in materials processing technologies10.1016/j.matpr.2022.07.216 ↗
27. Effect of TiC reinforcement in the copper tool on roundness during EDM process
28. Effects of performance measures of non-conventional joining processes on mechanical properties of metal matrix composites
29. Turning of particulate metal matrix composites — review and discussion10.1243/09544054JEM304 ↗
30. Particulate reinforced metal matrix composites — a review10.1007/BF00544448 ↗
31. Metal matrix composites – from science to technological significance10.1016/j.compscitech.2005.05.027 ↗
32. Advanced production routes for metal matrix composites10.1002/eng2.12330 ↗
33. Effect of graphene size variation on mechanical properties of aluminium graphene nanocomposites: a modeling analysis10.1016/j.matpr.2022.07.259 ↗
34. A smartphone operated electrochemical reader and actuator that streamlines the operation of electrochemical biosensors10.1149/2754-2726/ac5fb3 ↗
35. Carbon footprint impacts of banning cars with internal combustion engines10.1016/j.trd.2021.102807 ↗
36. 2018
37. 2022
38. Lynch · 2017
39. Carbon nanotube reinforced metal matrix composites - a review10.1179/095066009X12572530170543 ↗
40. Fabrication and machining of metal matrix composites: a review10.1080/10426914.2015.1025976 ↗
41. Matthews · 2020
42. Aluminium matrix composites: challenges and opportunities10.1007/BF02717141 ↗
43. Future trends and recent developments of fabrication technology for advanced metal matrix composites10.1080/10426919408934962 ↗
44. Phase analysis of new composition of high-strength structural steel10.1134/S0020168516150164 ↗
45. Structural and mechanical behaviour of 5% Al2O3-reinforced Fe metal matrix composites (MMCs) produced by powder metallurgy (P/M) route10.1007/s12034-013-0545-1 ↗
46. the influence of interface structure on the electrical conductivity of graphene embedded in aluminum matrix10.1002/admi.201900468 ↗
47. Ultrahigh strength and high electrical conductivity in copper10.1126/science.1092905 ↗
48. Mechanical, tribological and electrical properties of Cu-CNT composites fabricated by flake powder metallurgy method10.1016/j.acme.2019.02.005 ↗
49. Microstructure and mechanical properties of consolidated Cu-Cr-CNT nanocomposite prepared via powder metallurgy10.1016/j.jallcom.2017.10.282 ↗
50. An investigation on the effect of sintering mode on various properties of copper-graphene metal matrix composite10.1016/j.apt.2017.04.013 ↗
51. Fabrication of in-situ grown graphene reinforced Cu matrix composites10.1038/srep19363 ↗
52. Thermal and surface analysis of copper – CNT and copper – graphene-based composite using Taguchi – Grey relational analysis10.1080/14484846.2019.1581450 ↗
53. Electrical resistivity of aluminum and manganese10.1063/1.555725 ↗
54. Electrical resistivity and deviations from Matthiessen’s Rule in dilute alloys of aluminum, cadmium, silver, and magnesium10.1103/PhysRevB.2.2961 ↗
55. Influence of adding transition metal elements to an aluminum target on electrical resistivity and hillock resistance in sputter‐deposited aluminum alloy thin films10.1116/1.580194 ↗
56. Malaki · Advanced metal matrix nanocomposites · 2019 · 910.3390/met9030330 ↗
57. Experimental investigation on the mechanical, structural and thermal properties of Cu–ZrO2 nanocomposites hybridized by graphene nanoplatelets10.1016/j.ceramint.2019.12.172 ↗
58. Electrical conductivity of individual carbon nanotubes10.1038/382054a0 ↗
59. Fabrication and properties of silver-matrix composites reinforced by carbon nanotubes10.1016/j.matchar.2005.05.003 ↗
60. Carbon nanotube induced microstructural characteristics in powder metallurgy Al matrix composites and their effects on mechanical and conductive properties10.1016/j.jallcom.2015.08.178 ↗
61. In-situ characterization of interfacial shear strength in multi-walled carbon nanotube reinforced aluminum matrix composites10.1016/j.carbon.2016.05.015 ↗
62. Reinforcing graphene oxide nanoparticles to enhance viscoelastic performance of epoxy nanocomposites10.1166/jnn.2019.16336 ↗
63. A short review on mechanical properties of graphene reinforced metal matrix composites10.1016/j.jmrt.2020.01.077 ↗
64. Ozkan · 2019 · 4
65. 2D materials: graphene and others10.1063/1.4946510 ↗
66. Largely enhanced thermal conductivity of graphene/copper composites with highly aligned graphene network10.1016/j.carbon.2017.10.099 ↗
67. Carbon nanotube-copper exhibiting metal-like thermal conductivity and silicon-like thermal expansion for efficient cooling of electronics10.1039/C3NR05290G ↗
68. Effect of processing route on mechanical and thermal properties of few-layered graphene (FLG)-reinforced copper matrix composites10.1016/j.jallcom.2018.04.272 ↗
69. Effect of carbonaceous nanomaterials’ reinforcement on mechanical properties of aluminium metal-based nanocomposite: a review10.1016/j.matpr.2020.07.221 ↗
70. Aluminum matrix composites reinforced with graphene: a review on production, microstructure, and properties10.1080/10408436.2019.1632792 ↗
71. Graphene-reinforced aluminum matrix composites: a review of synthesis methods and properties10.1007/s11837-018-2810-7 ↗
72. Copper/graphene composites: a review10.1007/s10853-019-03703-5 ↗
73. Askeland · 1991
74. The theory of electrical conductivity
75. Proposed solution for random characteristics of aluminium alloy wire rods due to the natural aging10.1016/j.mspro.2015.04.012 ↗
76. Mechanical properties and thermal conductivity ofgraphene reinforced copper matrix composites10.1016/j.powtec.2016.06.045 ↗
77. Microstructure and mechanical properties of Cu-graphene composites produced by two high pressure torsion procedures10.1016/j.matchar.2020.110122 ↗
78. Preparation of Cu- graphene coating via electroless plating for high mechanical property and corrosive resistance10.1016/j.jallcom.2018.11.031 ↗
79. Surfactant-free electrodeposition of reduced graphene oxide/copper composite coatings with enhanced wear resistance10.1016/j.apsusc.2017.10.014 ↗
80. Preparation mechanism of hierarchical layered structure of graphene / copper composite with ultrahigh tensile strength10.1016/j.carbon.2017.10.095 ↗
81. Three-dimensional interpenetrating network graphene/copper composites with simultaneously enhanced strength, ductility and conductivity10.1016/j.matlet.2018.04.069 ↗
82. Ultrahigh electrical conductivity of graphene embedded in metals10.1002/adfm.201806792 ↗
83. Aluminium-graphene metal matrix nanocomposites: Modelling, analysis, and simulation approach to estimate mechanical properties10.1016/j.matpr.2022.07.259 ↗
84. Towards hospital-on-chip supported by 2D MXenes-based 5th generation intelligent biosensors10.1016/j.bios.2022.114847 ↗
85. Effect of reduced graphene oxide nanoplatelets content on the mechanical and electrical properties of copper matrix composite10.1016/j.jallcom.2019.07.183 ↗
86. Mechanical and electrical properties of copper-graphene nanocomposite fabricated by high pressure torsion10.1016/j.jallcom.2018.10.139 ↗
87. Synergetic effect of CeO2 doping on structural and tribological behavior of Fe-Al2O3 metal matrix nanocomposites10.1149/2162-8777/ac9c92 ↗
88. Simultaneously enhancing the strength, plasticity, and conductivity of copper matrix composites with graphene-coated submicron spherical copper10.3390/nano12061025 ↗
89. The role of powder preparation route on physical and mechanical properties of Cu-rGO bulk nanocomposites10.1016/j.mtcomm.2021.102470 ↗
90. Microstructure, electrical conductivity and hardness of multilayer graphene/Copper nanocomposites synthesized by flake powder metallurgy10.1007/s12540-015-5058-6 ↗
91. An overview of the recent developments in metal matrix nanocomposites reinforced by graphene10.3390/ma12172823 ↗
92. Conductive enhancement of copper/graphene composites based on a high-quality graphene10.1039/C5RA15189A ↗
93. Effects of graphene content on the microstructure and properties of copper matrix composites10.1016/j.carbon.2015.10.023 ↗
94. Effect of carbide interlayers on the microstructure and properties of graphene-nanoplatelet-reinforced copper matrix composites10.1016/j.msea.2017.10.015 ↗
95. Enhanced mechanical and electrical properties of novel graphene reinforced copper matrix composites10.1016/j.jallcom.2018.10.357 ↗
96. Electroless Ni-plated graphene for tensile strength enhancement of copper10.1016/j.msea.2016.10.029 ↗
97. Interface engineering of graphene/copper matrix composites decorated with tungsten carbide for enhanced physico-mechanical properties10.1016/j.carbon.2020.10.091 ↗
98. Improved high temperature strength of copper- graphene composite material10.1016/j.matlet.2016.06.034 ↗
99. Simultaneously enhancing the strength, ductility and conductivity of copper matrix composites with graphene nanoribbons10.1016/j.carbon.2017.03.055 ↗
100. Preparation of graphene nanoplatelets reinforcing copper matrix composites by electrochemical deposition10.1016/j.jallcom.2018.06.309 ↗