Dependence of the Physical Properties of Titanium Dioxide (TiO2) Thin Films Grown by Sol-Gel (Spin-Coating) Process on Thickness
Source abstract
Abstract
In this work, high transparent TiO2 nano-crystallinethin films have been prepared by a simple sol–gel spin coating technique. The effects of number of layers on physical properties of TiO2 thin films were studied by means X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), UV–vis spectrophotometer, and four probes measurement. The XRD analysis confirms that TiO2 has anatase phase structure with preferred orientation of (101) direction, while the crystallite size values varied with the number of layers in the range of 16–19 nm. The films exhibit high optical transparency (>70%), reaching a maximum of 85% in the visible region with the red-shifted absorption edge, suggesting the films optical gap energy decreases with increasing number of layers from 3.67 to 3.52 eV. However, the Fourier transform infrared (FTIR) reflectance spectra show the existence of functional groups and chemical bonding. The films electrical properties measurement indicated that the substantially enhancement in the resistivity with increasing the number of layers from 3.3 × 105 to 2.15 × 106 Ω.cm. This study indicates that TiO2 films may be a potential candidate in technological applications as solar cells, photocatalysts and gas sensors due to its desired structural, optical and electrical properties.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: ZnO doping and properties · Transition Metal Oxide Nanomaterials · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Optical wave guides in TiO2 formed by He ion implantation10.1364/OE.20.006712 ↗
2. Properties of fluorine-doped ZnO deposited onto glass by spray pyrolysis10.1016/S0927-0248(97)00246-8 ↗
3. Morphology and structure of nano-sized In2O3 crystals synthesized by wet reaction
4. Effect of preparation parameters on the properties of TiO2 nanoparticles for dye sensitized solar cells10.1016/j.renene.2010.04.035 ↗
5. Synthesis and photopsyhical properties of pyerene-functionalized nano-SiO2 hybrids in solutions and doped-PMMA thin films10.1016/j.matchemphys.2016.10.043 ↗
6. Exploring potential environmental applications of TiO2 nanoparticles10.1016/j.egypro.2017.07.117 ↗
7. Morphological and optical properties of dielectric multilayer structures prepared with distinct precursor concentrations
8. Photocatalysis on TiO2 surfaces: principles, mechanisms, and selected results10.1021/cr00035a013 ↗
9. High-performance wide band gap perovskite solar cells fabricated in ambient high-humidity conditions10.1039/D1MA00432H ↗
10. Photonic-structured TiO2 for high-efficiency, flexible and stable perovskite solar cells10.1016/j.nanoen.2019.02.023 ↗
11. Atomic layer deposition of Al2O3 and TiO2 multilayers for applications as band pass filters and antireflection coatings
12. TiO2nanoparticlesfunctionalized by Pd nanoparticles for gas-sensing application with enhanced butane response performances10.1038/s41598-017-08074-y ↗
13. Superior UV photodetector performance of TiO2 films using Nb doping10.1016/j.jpcs.2021.110350 ↗
14. Metal oxide nanostructures for sensor applications10.1088/1361-6641/ab011e ↗
15. Multi level resistive switching performance of TiO2-based flexible memory prepared by low-temperature sol-gel method with UV irradiation10.1016/j.cap.2021.02.001 ↗
16. Recent progress in solution-based metal oxide resistive switching devices10.1002/adma.202004328 ↗
17. Preparation of nitrogen substituted TiO2 thin film photocatalysts by the radio frequency magnetron sputtering deposition method and their photocatalytic reactivity under visible light irradiation10.1021/jp064893e ↗
18. Photocatalytic activities and specific surface area of TiO2 films prepared by CVD and sol–gel method10.1007/s11814-008-0060-z ↗
19. Improved electrochemical performance of dye-sensitized solar cell via surface modifications of the working electrode by electro-deposition10.1007/s11814-012-0189-7 ↗
20. TiO2, TiO2/Ag and TiO2/Au photocatalysts prepared by spray pyrolysis10.1016/j.jeurceramsoc.2010.10.006 ↗
21. Ultrasonic spray pyrolysis of TiO2nano-particles10.1016/S0965-9773(97)00034-2 ↗
22. Deposition of TiO2 blocking layers of photovoltaic cell using RF magnetron sputtering technology10.1016/j.egypro.2013.06.788 ↗
23. TiO2 nano-crystals decorated CVD grapheme based hybrid for UV-light active photo-anodes10.1016/j.proeng.2016.11.180 ↗
24. In situ optical spectroscopy of PLD of nano-structured TiO210.1016/j.vacuum.2004.01.048 ↗
25. The comparison of property and visible light activity between bulk and surface doped N-TiO2 prepared by sol-gel and N2-plasmatreatment10.5012/bkcs.2012.33.1.199 ↗
26. Surface characterisation and photo-catalytic performance of N-doped TiO2thin films deposited onto 200 nm pore size alumina membranes by sol−gel methods10.1016/j.matchemphys.2015.03.044 ↗
27. Determination of the thickness and optical constants of amorphous silicon10.1088/0022-3735/16/12/023 ↗
28. The synthesis and characterization of sprayed ZnO thin films: as a function of solution molarity10.3233/MGC-150183 ↗
29. Characterization of spin-coated TiO2 buffer layers for dyesensitized solar cells
30. Anatase TiO2 films based CO gas sensor: Film thickness, substrate and temperature effects10.1016/j.apsusc.2007.04.068 ↗
31. The electronic structure and optical response of rutile, anatase and brookite TiO210.1088/0953-8984/24/19/195503 ↗
32. Synthesis, characterization and photocatalytic properties of sol–gel TiO2 films10.1016/j.ceramint.2010.10.034 ↗
33. Controlled nanostructuring of TiO2 nanoparticles: a sol–gel approach10.1007/s10971-014-3557-4 ↗
34. Optical and photocatalytic properties of composite TiO2/ZnO thin films10.1016/j.cattod.2013.10.003 ↗
35. Synthesis of anatase TiO2 supported on porous solids by chemical vapor deposition10.1016/S0920-5861(01)00298-X ↗
36. Structural, electrical and optical properties of multilayer TiO2 thin films deposited by sol-gel spin coating10.1016/j.rinp.2017.03.023 ↗
37. On crystallite size dependence of phase stability of nano-crystalline TiO210.1063/1.1604966 ↗
38. Influence of substrate and annealing temperatures on optical properties of RF-sputtered TiO2 thin films10.1016/j.optmat.2009.07.011 ↗
39. Solution flow rate influence on ZnS thin films properties grown by ultrasonic spray for optoelectronic application10.1088/1674-4926/39/9/093001 ↗
40. Properties of n-type SnO2 semiconductor prepared by spray ultrasonic technique for photovoltaic applications10.1088/1674-4926/36/12/123002 ↗
41. Structural, morphological, optical and electrical characterization of spray ultrasonic deposited SnS2thin film10.1016/j.ijleo.2015.11.149 ↗
42. Some physical investigations on hexagonal-shaped nanorods of lanthanum-doped ZnO10.1016/j.jallcom.2015.07.009 ↗
43. Effect of thickness on the structural and optical properties of ZnO films by r.f. magnetron sputtering10.1016/j.surfcoat.2003.11.014 ↗
44. Annealing effect on the structural, morphological and electrical properties of TiO2/ZnO bilayer thin films10.1016/j.rinp.2017.12.030 ↗
45. Influence of In-doping on microstructure, optical and electrical properties of sol–gel derived CdO thin films10.1007/s10854-018-9216-8 ↗
46. Estimation of lattice strain for zirconia nano-particles based on williamson- hall analysis10.1016/j.matchemphys.2017.01.059 ↗
47. Ef Effect of particle size and dopant concentration on the Raman and the photoluminescence spectra of TiO2:Eu3+nanophosphor thin films10.1016/j.jlumin.2019.03.050 ↗
48. Nano-phase titanium dioxide thin film deposited by repetitive plasma focus: ion irradiation and annealing based phase transformation and agglomeration10.1016/j.apsusc.2008.08.055 ↗
49. Physical properties of Zn doped TiO2 thin films with spray pyrolysis technique and its effects in antibacterial activity10.1016/j.saa.2014.11.016 ↗
50. Cullity · 1978
51. Structure and internal stress of tin-doped indium oxide and indium–Zinc oxide films deposited by DC magnetron sputtering10.1143/JJAP.46.7806 ↗
52. Oxygen effect in radio frequency magnetron sputtered aluminium doped zinc oxide films10.1016/j.tsf.2014.03.073 ↗
53. Effect of annealing on the structural, optical and electrical properties of ZnO thin films by spray pyrolysis10.1007/s12648-011-0160-1 ↗
54. Investigation on properties of TiO2 thin films deposited at different oxygen pressures10.1016/j.optlastec.2007.09.003 ↗
55. Sol–gel synthesis, characterization and optical properties of mercury-doped TiO2thin films deposited on ITO glass substrates10.1016/j.apsusc.2011.05.107 ↗
56. Characterization of anatase and rutile TiO2 thin films deposited by two cathodes sputtering system10.4028/www.scientific.net/AMR.55-57.469 ↗
57. Mechanical and structural properties of titanium dioxide deposited by innovative magnetron sputtering process10.1515/msp-2015-0084 ↗
58. Investigation of structural, optical and electrical properties of ZnS thin films prepared by ultrasonic spray technique for photovoltaic applications10.1016/j.ijleo.2017.10.034 ↗
59. Sputtered ZnS thin film from nanoparticles synthesized by hydro thermal route10.1016/j.ijleo.2016.01.022 ↗
60. Physical properties of Pb doped ZnS thin films prepared by ultrasonic spray technique10.1016/j.physleta.2019.126199 ↗
61. A simple spectrophotometric method for determination of the optical constants and band gap energy of multiple layer TiO2 thin films10.1016/j.matchemphys.2003.09.030 ↗
62. N2/Ar plasma induced doping of ordered mesoporous TiO2 thin films for visible light active photocatalysis10.1016/j.micromeso.2015.08.030 ↗
63. Influence of calcination temperature on optical and structural properties of TiO2 thin films prepared by means of sol-gel and spin coating
64. Optical and structural characterization of TiO2 films doped with silver nanoparticles obtained by sol–gel method10.1016/j.optmat.2013.08.030 ↗
65. Sized dependent reflactive properties of TiO2 nanoparticles and reflectors made there of
66. The determination of the thickness and optical constants of the ZnO crystalline thin film by using envelope method
67. Oxygen defect dependent variation of band gap, Urbach energy and luminescence property of anatase, anatase–rutile mixed phase and of rutile phases of TiO2 nanoparticles10.1016/j.physe.2013.10.014 ↗
68. Synthesis of TiO2 thin film by a modified sol-gel method and properties of the prepared films for photocatalyst10.1007/s10971-006-8164-6 ↗
69. Compositional tailored sol-gel SiO2–TiO2 thin films: Crystallization, chemical bonding configuration, and optical properties10.1557/JMR.2005.0393 ↗
70. Physical properties of Al-doped ZnS thin films prepared by ultrasonic spray technique10.1016/j.surfin.2020.100645 ↗
71. Structural and electrical properties of TiO2thin film derived from sol-gel method using titanium (IV) but oxide
72. Optical, electrical and mechanical properties of TiN thin film obtained from a TiO2 sol-gel coating and rapid thermal nitridation10.1016/j.surfcoat.2021.127089 ↗
73. Effect of annealing temperatures on the morphology, optical and electrical properties of TiO2 thin films synthesized by the sol–gel method and deposited on Al/TiO2/SiO2/p-Si10.1007/s00542-015-2514-7 ↗