journal article·2022-12Open access

EEG sensor system development consisting of solid polyvinyl alcohol–glycerol–NaCl contact gel and 3D-printed, silver-coated polylactic acid electrode for potential brain–computer interface use

K. Jakab, J. Csipor, I. Ulbert, Z. Keresztes, G. Mészáros, G. Márton

Abstract

The paper describes the development of a reusable electrode system for non-invasive brainecomputer interface application with signal quality comparable to that of conventional wet Ag/AgCl electrodes. The innovative electrode system consists of a polyvinyl alcoholeglyceroleNaCl contact hydrogel and a 3Dprinted, silver-coated polylactic acid electrode body. Advantageous features of the proposed system are the comfortable use, reusability, long shelf life, and alterable geometry. The electrical properties of freshly prepared and aged contact gels, as well as different gel/silver interfaces, were separately characterized, showing much lower impedance values than those measured at the electrodeeskin interface with the complete electrode system. Acceptability limits relevant to electroencephalographic measurements, such as signal-to-noise ratio during steady-state visually evoked potential measurements and band ratio values during alpha wave detection, have proven the applicability of the system.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: EEG and Brain-Computer Interfaces · Neuroscience and Neural Engineering · Gaze Tracking and Assistive Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. EEG-based brain–computer interfaces10.1016/j.cobme.2017.11.004 ↗
2. Brain computer interfacing: applications and challenges, Egypt
3. A microneedle electrode array on flexible substrate for long-term EEG monitoring10.1016/j.snb.2017.01.052 ↗
4. Characterization of micromachined spiked biopotential electrodes10.1109/TBME.2002.1001974 ↗
5. New dry electrodes based on iridium oxide (IrO) for non-invasive biopotential recordings and stimulation10.1016/j.sna.2010.09.016 ↗
6. First human trials of a dry electrophysiology sensor using a carbon nanotube array interface10.1016/j.sna.2008.03.007 ↗
7. 3D printed dry EEG electrodes10.3390/s16101635 ↗
8. A 3D printed dry electrode for ECG/EEG recording10.1016/j.sna.2011.12.017 ↗
9. Developing a one-channel BCI system using a dry claw-like electrode
10. Flexible 3D-printed EEG electrodes10.3390/s19071650 ↗
11. Soft pin-shaped dry electrode with bristles for EEG signal measurements10.1016/j.sna.2018.09.045 ↗
12. Soft, comfortable polymer dry electrodes for high quality ECG and EEG recording10.3390/s141223758 ↗
13. Simultaneous and sensitive determination of ascorbic acid, dopamine and uric acid via an electrochemical sensor based on PVP-graphene composite
14. Rapid recognition and determination of tryptophan by carbon nanotubes and molecularly imprinted polymer-modified glassy carbon electrode10.1016/j.bioelechem.2019.107393 ↗
15. Electropolymerization of molecularly imprinted polypyrrole film on multiwalled carbon nanotube surface for highly selective and stable determination of carcinogenic amaranth10.1016/j.jelechem.2021.115494 ↗
16. Bristle-sensors - low-cost flexible passive dry EEG electrodes for neurofeedback and BCI applications10.1088/1741-2560/8/2/025008 ↗
17. Novel dry polymer foam electrodes for long-term EEG measurement10.1109/TBME.2010.2102353 ↗
18. Design, fabrication and experimental validation of a novel dry-contact sensor for measuring electroencephalography signals without skin preparation10.3390/s110605819 ↗
19. Towards emerging EEG applications: a novel printable flexible Ag/AgCl dry electrode array for robust recording of EEG signals at forehead sites10.1088/1741-2552/ab71ea ↗
20. Development of a quasi-dry electrode for EEG recording10.1016/j.sna.2013.06.013 ↗
21. A novel passive electrode based on porous Ti for EEG recording10.1016/j.snb.2015.11.141 ↗
22. Assessing a novel micro-seepage electrode with flexible and elastic tips for wearable EEG acquisition10.1016/j.sna.2017.12.048 ↗
23. A non-adhesive solid-gel electrode for a non-invasive brain-machine interface
24. Alginate-based hydrogels as an alternative to electrolytic gels for rapid EEG monitoring and easy cleaning procedures10.1016/j.snb.2017.02.164 ↗
25. Novel hydrogel-based preparation-free EEG electrode10.1109/TNSRE.2010.2048579 ↗
26. Towards real-life EEG applications: novel superporous hydrogel-based semi-dry EEG electrodes enabling automatically “charge-discharge” electrolyte10.1088/1741-2552/abeeab ↗
27. In-service characterization of a polymer wick-based quasi-dry electrode for rapid pasteless electroencephalography10.1515/bmt-2016-0193 ↗
28. Novel passive ceramic based semi-dry electrodes for recording electroencephalography signals from the hairy scalp10.1016/j.snb.2016.06.045 ↗
29. High-performance and flexible solid-state supercapacitors based on high toughness and thermoplastic poly(vinyl alcohol)/NaCl/glycerol supramolecular gel polymer electrolyte10.1016/j.electacta.2019.134874 ↗
30. Fabrication and electrochemical performance of PVA/CNT/PANI flexible films as electrodes for supercapacitors10.1186/s11671-020-03379-w ↗
31. Vanadium dioxide-anchored porous carbon nanofibers as a Na+ intercalation pseudocapacitance material for development of flexible and super light electrochemical energy storage systems10.1016/j.apmt.2017.11.011 ↗
32. In vitro hemocompatibility of PVA-alginate ester as a candidate for hemodialysis membrane10.1016/j.ijbiomac.2015.10.021 ↗
33. Fabrication of an original transparent PVA/gelatin hydrogel: in vitro antimicrobial activity against skin pathogens10.1155/2019/7651810 ↗
34. Preparation and characterization of polyvinyl alcohol-gelatin hydrogel membranes for biomedical applications10.1208/pt080121 ↗
35. Reinforced uncrosslinked poly (vinyl alcohol) gels produced by cyclic freezing-thawing processes: a short review10.1016/0168-3659(91)90007-Z ↗
36. Poly(vinyl alcohol) hydrogels prepared by freezing-thawing cyclic processing10.1016/0032-3861(92)90385-A ↗
37. Cellular PVA hydrogels produced by freeze/thawing10.1002/(SICI)1097-4628(20000628)76:14<2075::AID-APP11>3.0.CO;2-V ↗
38. Structure and morphology of freeze/thawed PVA hydrogels10.1021/ma9907587 ↗
39. Modeling of crystal dissolution of poly(vinyl alcohol) gels produced by freezing/thawing processes10.1016/S0032-3861(00)00031-8 ↗
40. PVA/PEG hybrid hydrogels prepared by freeze-thawing and high energy electron beam irradiation10.1007/s40242-017-7107-9 ↗
41. PVA-PEG physically cross-linked hydrogel film as a wound dressing: experimental design and optimization10.1080/10837450.2017.1295067 ↗
42. Construction of chitin/PVA composite hydrogels with jellyfish gel-like structure and their biocompatibility10.1021/bm500827q ↗
43. Effects of PVA, agar contents, and irradiation doses on properties of PVA/ws-chitosan/glycerol hydrogels made by γ-irradiation followed by freeze-thawing10.1016/j.radphyschem.2008.02.011 ↗
44. Facile preparation of hydrogen-bonded supramolecular polyvinyl alcohol-glycerol gels with excellent thermoplasticity and mechanical properties10.1016/j.polymer.2017.01.051 ↗
45. Facile preparation and characterization of poly(vinyl alcohol)-NaCl-glycerol supramolecular hydrogel electrolyte10.1016/j.eurpolymj.2018.07.024 ↗
46. Review of semi-dry electrodes for EEG recording10.1088/1741-2552/abbd50 ↗
47. Towards conductive-gel-free electrodes: understanding the wet electrode, semi-dry electrode and dry electrode-skin interface impedance using electrochemical impedance spectroscopy fitting10.1016/j.snb.2018.08.155 ↗
48. Dry EEG electrodes10.3390/s140712847 ↗
49. Ag/AgCl microelectrodes with improved stability for microfluidics10.1016/j.snb.2005.03.121 ↗
50. Meeting the requirements of the silver/silver chloride reference electrode10.1007/s10953-009-9462-8 ↗