journal article·2021-06Open access

Three dimensional printed nanogenerators

Xinran Zhou, Pooi See Lee

EcoMat· Volume 3· Issue 3

Abstract

Abstract In the dawn of energy crisis and rising challenges in powering distributed low energy portable devices, nanogenerators, a class of mechanical energy harvesters is gaining increasing interest in fundamental research and commercial applications. Nanogenerators harvest energy by transducing mechanical energy into electric energy, the performance is highly related to the mechanical and electrical properties of the materials and devices. A typical nanogenerator consists of a substrate, a functional triboelectric active layer, electrode, and separator, which overall built‐up a three dimensional (3D) structure. 3D printing with its ability to form complex 3D structures possess coveted advantages in the development of nanogenerators. In this review, we introduce the importance of 3D structures for nanogenerators and explicitly discuss the different 3D printing methods and the ink formulation to tackle the challenges in 3D structured nanogenerators. Additionally, the principle and application of 4D printing in nanogenerator fabrication are critically highlighted. image
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Tactile and Sensory Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering Nanyang Technological University Singapore Singapore

Singapore‐HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE) Singapore Singapore

Funding

National Research Foundation

References (47)

Show source-provided references
1. 10.1016/j.mattod.2016.12.00110.1016/j.mattod.2016.12.001 ↗
2. 10.1039/c0ee00137f10.1039/c0ee00137f ↗
3. 10.1016/j.nanoen.2019.01.07710.1016/j.nanoen.2019.01.077 ↗
4. High power density tower‐like triboelectric nanogenerator for harvesting arbitrary directional water wave energy
5. 3D printing individualized triboelectric nanogenerator with macro‐pattern10.1016/j.nanoen.2018.04.071 ↗
6. 10.3390/ma1208135310.3390/ma12081353 ↗
7. Dynamic photomask‐assisted direct ink writing multimaterial for multilevel triboelectric nanogenerator10.1002/adfm.201903568 ↗
8. 10.1016/j.nanoen.2020.10467610.1016/j.nanoen.2020.104676 ↗
9. 3D printed flexible triboelectric nanogenerator with viscoelastic inks for mechanical energy harvesting10.1016/j.nanoen.2019.01.066 ↗
10. Self‐powered triboelectric touch sensor made of 3d printed materials10.1016/j.nanoen.2018.07.038 ↗
11. 10.1038/s41467-019-10061-y10.1038/s41467-019-10061-y ↗
12. 3D‐printed biomimetic‐villus structure with maximized surface area for triboelectric nanogenerator and dust filter10.1016/j.nanoen.2019.103857 ↗
13. 10.1021/acsami.7b0852610.1021/acsami.7b08526 ↗
14. All 3d printed energy harvester for autonomous and sustainable resource utilization10.1016/j.nanoen.2018.07.061 ↗
15. Remarkable output power enhancement of sliding‐mode triboelectric nanogenerator through direct metal‐to‐metal contact with the ground10.1016/j.nanoen.2018.12.034 ↗
16. Rapidly fabricated triboelectric nanogenerator employing insoluble and infusible biomass materials by fused deposition modeling10.1016/j.nanoen.2019.104382 ↗
17. 10.1002/adfm.20180428410.1002/adfm.201804284 ↗
18. 10.1016/j.jmapro.2009.03.00210.1016/j.jmapro.2009.03.002 ↗
19. 10.1021/acsnano.7b0368310.1021/acsnano.7b03683 ↗
20. 10.1007/s12274-017-1916-510.1007/s12274-017-1916-5 ↗
21. Integrated flywheel and spiral spring triboelectric nanogenerator for improving energy harvesting of intermittent excitations/triggering
22. 10.1016/j.nanoen.2019.10423510.1016/j.nanoen.2019.104235 ↗
23. 3D printed noise‐cancelling triboelectric nanogenerator10.1016/j.nanoen.2017.05.054 ↗
24. Honeycomb structure inspired triboelectric nanogenerator for highly effective vibration energy harvesting and self‐powered engine condition monitoring10.1002/aenm.201902460 ↗
25. 10.1088/0964-1726/25/4/04501910.1088/0964-1726/25/4/045019 ↗
26. 10.1038/s41563-018-0268-110.1038/s41563-018-0268-1 ↗
27. 10.1002/adma.20140594410.1002/adma.201405944 ↗
28. Self‐power electroreduction of n2 into nh3 by 3d printed triboelectric nanogenerators10.1016/j.mattod.2019.05.004 ↗
29. Three‐dimensional ultraflexible triboelectric nanogenerator made by 3d printing10.1016/j.nanoen.2017.12.049 ↗
30. Whirling‐folded triboelectric nanogenerator with high average power for water wave energy harvesting
31. 10.1021/nn506631t10.1021/nn506631t ↗
32. Painting a high‐output triboelectric nanogenerator on paper for harvesting energy from human body motion10.1016/j.nanoen.2018.06.019 ↗
33. Spherical wave power generator with origami‐structured double‐helix multifold electrets
34. 10.1557/jmr.2018.610.1557/jmr.2018.6 ↗
35. 10.1016/j.sna.2018.09.01910.1016/j.sna.2018.09.019 ↗
36. 10.1002/adma.20150313210.1002/adma.201503132 ↗
37. 10.1021/acsami.9b1976710.1021/acsami.9b19767 ↗
38. Highly transparent, stretchable, and self‐healing ionic‐skin triboelectric nanogenerators for energy harvesting and touch applications10.1002/adma.201702181 ↗
39. 10.1039/C5EE02711J10.1039/C5EE02711J ↗
40. Self‐restoring, waterproof, tunable microstructural shape memory triboelectric nanogenerator for self‐powered water temperature sensor10.1016/j.nanoen.2019.04.089 ↗
41. 10.1039/C9RA09967K10.1039/C9RA09967K ↗
42. 10.1088/0964-1726/23/9/09400710.1088/0964-1726/23/9/094007 ↗
43. Desolvation induced origami of photocurable polymers by digit light processing
44. 4D printing smart biomedical scaffolds with novel soybean oil epoxidized acrylate10.1038/srep27226 ↗
45. Sequential self‐folding of polymer sheets
46. 4D printing: multimaterial shape change10.1002/ad.1710 ↗
47. A wireless triboelectric nanogenerator