journal article·2023-07

Constructing lamellar low temperature anion exchange membranes based on polymerized ionic liquid and graphene oxide nanosheets

T.T. Zuo, K. Liu, X.Q. Wei, S. Hu, Q.T. Che

Publisher page

Abstract

Polymerized ionic liquid (PIL) of poly(1-vinyl-3-methylimidazolium) chloride (poly(vmim)Cl) and graphene oxide (GO) nanosheets were respectively deposited on the surface of Kevlar aramid nanofibers (KANFs) substrates to construct anion exchange membranes (AEMs). The multilayered microstructure resulted in orderly distributed components, which thus improved the mechanical properties and dimension stability of the lamellar low-temperature AEMs. The imidazolium cations in PIL and the polar oxygen functional groups in GO nanosheets constituted the interconnected hydroxide ion conduction channels in the prepared Kevlar/(PIL/GO)60 membrane. Relative to the ionic liquid (IL) monomer of 1-vinyl-3-methylimidazolium chloride, the PIL with polymerized molecular chains could be embedded in GO nanosheets with the formation of a stable microstructure. The Kevlar/(PIL/GO)60 membrane exhibited the enhanced alkaline stability relative to the Kevlar/(IL/GO)60 membrane. Furthermore, the hydroxide conduction behavior in the AEMs at subzero temperatures has been researched in consideration of the long-term exposure in colder conditions of the vehicles equipped with fuel cells. As a result, the Kevlar/(PIL/GO)60 membrane exhibited a hydroxide conductivity of 0.94 mS/cm at −25 °C, 5.25 mS/cm at 30 °C, and 64.7 mS/cm at 80 °C. Meanwhile, good alkaline stability was revealed from the ten-cycle hydroxide conductivities and long-time hydroxide conductivities. In addition, the PIL enhanced the mechanical strength of the Kevlar/(PIL/GO)60 membrane, with the tensile stress at break increasing by 31.3% compared with that of the Kevlar/(IL/GO)60 membrane.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Membrane-based Ion Separation Techniques · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Host-guest interaction induced ion channels for accelerated OH– transport in anion exchange membranes10.1016/j.memsci.2022.120580 ↗
2. Poly (isatin biphenylene) polymer containing ferrocenium derivatives for anion exchange membrane fuel cell10.1016/j.memsci.2021.119986 ↗
3. Enhanced ion conductivity of sulfonated poly(arylene ether sulfone) block copolymers linked by aliphatic chains constructing wide-range ion cluster for proton conducting electrolytes10.1016/j.ijhydene.2020.07.197 ↗
4. Enhanced proton conductivity of sulfonated poly(arylene ether ketone sulfone) polymers by incorporating phosphotungstic acid-ionic-liquid-functionalized metal-organic framework10.1016/j.memsci.2021.119304 ↗
5. Anion exchange membrane fuel cells: current status and remaining challenges10.1016/j.jpowsour.2017.08.010 ↗
6. Long-branched and densely functionalized anion exchange membranes for fuel cells10.1016/j.memsci.2019.03.046 ↗
7. High performance cross-linked anion exchange membrane based on aryl-ether free polymer backbones for anion exchange membrane fuel cell application10.1039/D0SE00502A ↗
8. Anion-exchange membranes in electrochemical energy systems10.1039/C4EE01303D ↗
9. Semi-interpenetrating network anion exchange membranes based on quaternized polyvinyl alcohol/poly(diallyldimethylammonium chloride)10.1016/j.gee.2020.06.015 ↗
10. Stability challenge in anion exchange membrane for fuel cells10.1016/j.coche.2016.01.009 ↗
11. Side-chain effects on the properties of highly branched imidazolium-functionalized copolymer anion exchange membranes10.1016/j.apsusc.2019.07.059 ↗
12. Fabrication of cross-linked anion exchange membranes using a pillar[5]arene bearing multiple alkyl bromide head groups as cross-linker10.1002/mame.202000158 ↗
13. Preparation and characterization of organic-inorganic hybrid anion exchange membrane based on crown ether functionalized mesoporous SBA-NH210.1016/j.ijhydene.2022.02.137 ↗
14. Study on the chemical stabilities of poly(arylene ether) random copolymers for alkaline fuel cells: effect of main chain structures with different monomer units10.1021/acssuschemeng.9b05934 ↗
15. Boosting the performance of an anion exchange membrane by the formation of well-connected ion conducting channels10.1039/C9PY00011A ↗
16. Long-term durable anion exchange membranes based on imidazole-functionalized poly(ether ether ketone) incorporating cationic metal organic framework
17. High-performance COF-based composite anion exchange membrane sandwiched by GO layers for alkaline H2/O2 fuel cell application10.1016/j.jiec.2021.08.016 ↗
18. Constructing the basal nanofibers suit of layer-by-layer self-assembly membranes as anion exchange membranes10.1016/j.molliq.2022.118536 ↗
19. Alternating electric field-based ionic control and layer-by-layer assembly of anion exchange membranes for enhancing target anion selectivity10.1016/j.desal.2022.115773 ↗
20. Quaternized branched polyethyleneimine modified nitrogen-doped graphene quantum dots/quaternized polysulfone composite anion exchange membranes with improved performance10.1002/mame.202100787 ↗
21. Graphene oxide embedded "three-phase" membrane to beat "trade-off" in acid recovery10.1016/j.memsci.2016.08.020 ↗
22. Hydroxide-ion selective electrolytes based on a polybenzimidazole/graphene oxide composite membrane10.1016/j.energy.2017.06.061 ↗
23. Quaternized cellulose and graphene oxide crosslinked polyphenylene oxide based anion exchange membrane10.1038/s41598-019-45947-w ↗
24. Enhancing anion conduction stability of quaternized poly(phenylene) oxide-based anion exchange membranes with ionic liquids modified carbon nanomaterials10.1002/er.8400 ↗
25. Enhanced fumion nanocomposite membranes embedded with graphene oxide as a promising anion exchange membrane for fuel cell application
26. Reduced graphene oxide/polyaniline conductive anion exchange membranes in capacitive deionisation process10.1016/j.electacta.2015.09.128 ↗
27. Graphene-mediated organic-inorganic composites with improved hydroxide conductivity and outstanding alkaline stability for anion exchange membranes10.1016/j.compositesb.2018.11.084 ↗
28. Nanohybrid membranes with hydroxide ion transport highways constructed from imidazolium-functionalized graphene oxide10.1039/C5RA18183F ↗
29. Enhancing properties of poly(2,6-dimethyl-1,4-phenylene oxide)-based anion exchange membranes with 5-mercaptoterazole modified graphene oxides10.1016/j.renene.2020.06.052 ↗
30. N-spirocyclic ammonium-functionalized graphene oxide-based anion exchange membrane for fuel cells10.1016/j.ijhydene.2020.05.085 ↗
31. Anion exchange membranes composed of quaternized polybenzimidazole and quaternized graphene oxide for glucose fuel cell10.1016/j.ijhydene.2020.11.043 ↗
32. Synergistic role of graphene oxide-magnetite nanofillers contribution on ionic conductivity and permeability for polybenzimidazole membrane electrolytes10.1016/j.jpowsour.2019.227293 ↗
33. Polybenzimidazole/ionic liquid functionalized graphene oxide nanocomposite membrane for alkaline anion exchange membrane fuel cells10.1016/j.matlet.2016.03.057 ↗
34. Poly (2,6-dimethyl-1,4-phenylene oxide)/ionic liquid functionalized graphene oxide anion exchange membranes for fuel cells10.1016/j.memsci.2018.02.036 ↗
35. Improved electrochemical performance of composite anion exchange membranes for fuel cells through cross linking of the polymer chain with functionalized graphene oxide10.1016/j.memsci.2020.118385 ↗
36. Functionalized graphene oxide cross-linked poly(2,6-dimethyl-1,4-phenylene oxide)-based anion exchange membranes with superior ionic conductivity10.1016/j.jpowsour.2021.230720 ↗
37. Modification and properties characterization of heterogeneous anionexchange membranes by electrodeposition of graphene oxide (GO)10.1016/j.apsusc.2018.02.166 ↗
38. Dispersions of aramid nanofibers: a new nanoscale building block10.1021/nn2014003 ↗
39. Self-assembled embedding of ion exchange materials into nanofiber-based hydrogel framework for fluoride capture10.1016/j.cej.2021.134201 ↗
40. Ultra-high proton/vanadium selectivity of polybenzimidazole membrane by incorporating phosphotungstic acid functionalized nanofibers for vanadium redox flow battery10.3866/PKU.WHXB201905011 ↗
41. A dendrite-suppressing composite ion conductor from aramid nanofibres10.1038/ncomms7152 ↗
42. Aramid nanofiber-based porous membrane for suppressing dendrite growth of metal-ion batteries with enhanced electrochemistry performance10.1016/j.cej.2021.131924 ↗
43. Robust and flexible aramid nanofiber/graphene layer-by-layer electrodes10.1021/acsami.7b03449 ↗
44. Cathode-supported all-solid-state lithium-sulfur batteries with high cell-level energy density10.1021/acsenergylett.9b00430 ↗
45. Biomorphic structural batteries for robotics10.1126/scirobotics.aba1912 ↗
46. High proton conductivity polybenzimidazole proton exchange membrane based on phosphotungstic acid-anchored nano-Kevlar fibers10.1007/s10853-018-2942-8 ↗
47. Constructing proton exchange membranes with high and stable proton conductivity at subzero temperature through vacuum assisted flocculation technique10.1016/j.apsusc.2022.152579 ↗
48. Layered polyelectrolyte films as selective, ultrathin barriers for anion transport10.1021/cm0001004 ↗
49. Anion exchange membrane with well-ordered arrays of ionic channels based on a porous anodic aluminium oxide template10.1007/s10800-018-1214-2 ↗
50. Phosphoric acid doped high temperature proton exchange membranes based on sulfonated polyetheretherketone incorporated with ionic liquids10.1016/j.elecom.2010.02.021 ↗
51. Multilayered membrane electrolytes based on aramid nanofibers for high-temperature proton exchange membrane fuel cells10.1021/acsanm.9b00144 ↗
52. Constructing multilayered membranes with layer-by-layer self-assembly technique based on graphene oxide for anhydrous proton exchange membranes10.1016/j.eurpolymj.2019.109362 ↗
53. Synthesis and application of geminal dicationic ionic liquids and poly (ionic liquids) combined imidazolium and pyridinium cations as demulsifiers for petroleum crude oil saline water emulsions10.1016/j.molliq.2020.115264 ↗
54. Imidazolium-grafted graphene oxide via free radical polymerization: an efficient and simple method for an interpenetrating polymer network as electrolyte membrane10.1016/j.compscitech.2018.05.003 ↗
55. Thermal characteristics of para-aramid fibres10.1023/B:FICH.0000003476.55891.26 ↗
56. Constructing anhydrous proton conductive aramid membranes through grafting Kevlar micro-fibrils with phosphoric acid10.1007/s12221-021-0441-z ↗
57. Compatibilization of immiscible polymer blends using graphene oxide sheets10.1021/nn201717a ↗
58. Cyclodextrin edge functionalized graphene oxide modified poly(phthalazinone ether ketone) composite membrane with enhanced properties for anion exchange membrane10.1016/j.ssi.2018.03.024 ↗
59. Fabrication of high-alkaline stable quaternized poly(arylene ether ketone)/graphene oxide derivative including zwitterion for alkaline fuel cells10.1021/acssuschemeng.1c01978 ↗
60. Simultaneous improvement of anion conductivity and cell durability through the formation of dense ion clusters of F-doped graphitic carbon nitride/quaternized poly(phenylene oxide) composite membrane10.1016/j.memsci.2022.120384 ↗
61. Laminar GO membrane with imdazolium polymer brush for high hydroxide conduction10.1246/cl.180557 ↗
62. Facile synthesis of Br-PPO/fGO based polymer electrolyte membranes for electrochemical applications10.1016/j.ijhydene.2017.08.029 ↗
63. Ionic crosslinking of imidazolium functionalized poly(aryl ether ketone) by sulfonated poly(ether ether ketone) for anion exchange membranes10.1016/j.jcis.2017.03.033 ↗
64. A facile approach to fabricate poly(2,6-dimethyl-1,4-phenylene oxide) based anion exchange membranes with extended alkaline stability and ion conductivity for fuel cell applications10.1016/j.memsci.2019.117314 ↗
65. Anion exchange membranes with fast ion transport channels driven by cation-dipole interactions for alkaline fuel cells10.1016/j.memsci.2021.119404 ↗
66. Enhancing proton conductivity at subzero temperature through constructing the well-ordered structure based on carbon dots10.1016/j.memsci.2022.120536 ↗
67. Enhancing hydroxide conductivity at subzero temperature of anion exchange membranes based on imidazolium modified metal organic frameworks10.1016/j.molliq.2022.120943 ↗
68. Preparation and characterization of polyvinyl alcohol/chitosan blended membrane for alkaline direct methanol fuel cells10.1016/j.memsci.2012.06.051 ↗
69. A facile construction of quaternized polymer brush-grafted graphene modified polysulfone based composite anion exchange membranes with enhanced performance10.1039/C6RA06363B ↗
70. Hydrophilic-hydrophobic bulky units modified anion exchange membranes for fuel cell application10.1021/acssuschemeng.1c07886 ↗