Thermally activated delayed fluorescent polymer- assisted morphological control on perfluorinated ionomer enriched surface and exciton harvesting for phosphorescent organic light-emitting devices
Source abstract
Abstract
Abstract Poly(3,4-ethylenedioxythiophene):poly (styrenesulfonic acid) (PEDOT:PSS) is one of the most successful conductive polymers, usually used as hole injecting layer in organic light-emitting devices. Due to the enhanced conductivity and tunable work function (WF), the modification of PEDOT:PSS with some additives has been proved to be cost-effective. Perfluorinated ionomer (PFI) has been reported as an effective additive to improve the WF of PEDOT:PSS, increasing from 5.2 eV to 5.95 eV with a recipe of PEDOT(1):PSS(6):PFI(25). However, the strong hydrophobicity of PFI has limited the choice of the organic solvents used to fabricate the uniform emitting layer on the modified PEDOT:PSS. To address this issue, the polymers were introduced as the additives of the emitter to overcome the non-uniform morphology on the hydrophobic surface of PEDOT:PSS:PFI. A conventional fluorescent polymer poly(9-vinylcarbazole) (PVK) and a thermally activated delayed fluorescent polymer (4-(2-(9-(heptadecan-9-yl)-6-phenyl-9H-carbazol-3-yl)-9,9-dihexyl-7-phenylacridin-10(9H)-yl)phenyl) (phenyl)methanone (PABPC2.5) were compared in parallel to reveal the influence of the polymer additive of the emitters on the overall performances of the devices. The control device based on the PFI-modified PEDOT:PSS achieved a maximum current efficiency (CE) of 0.14 cd A−1, without any polymer additives in the emitting layer. In contrast, the CE of the devices with PVK and PABPC2.5 were dramatically elevated to 7.1 cd A-1 and 4.5 cd A−1 respectively, when a small molecular thermally activated delayed fluorescence compound was employed as the emitter. Enabled by an easily soluble phosphorescent emitter acetylacetonatobis(4-(4-tert-butylphenyl)-thieno[3,2-c]pyridinato-C2,N)iridium (PO-01-TB). The device with PABPC2.5 as the additive obtained a maximum CE of 42.0 cd A−1, which is significantly higher than 15.7 cd A−1 of the one with the additive PVK, attributed to the energy transfer in the emitting layer. The polymer additives not only overcome the issue of the hydrophobicity of the modified PEDOT:PSS but endow the exciton harvesting from the polymer to the small molecular emitters.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Organic electroluminescent diodes10.1063/1.98799 ↗
2. Progress of display performances: AR, VR, QLED, OLED, and TFT10.1080/15980316.2019.1572662 ↗
3. Stretchable active-matrix organic light-emitting diode display using printable elastic conductors10.1038/nmat2459 ↗
4. A colour-tunable, weavable fibre-shaped polymer light-emitting electrochemical cell10.1038/nphoton.2015.37 ↗
5. Thermally activated delayed fluorescence from Sn4+–Porphyrin complexes and their application to organic light emitting diodes-A novel mechanism for electroluminescence10.1002/adma.200900983 ↗
6. Achieving optimal self-adaptivity for dynamic tuning of organic semiconductors through resonance engineering10.1021/jacs.6b05042 ↗
7. Third-generation organic electroluminescence materials10.7567/JJAP.53.060101 ↗
8. Triplet manipulation for strong luminescence10.1016/j.scib.2020.07.004 ↗
9. Poly(3,4-ethylenedioxythiophene) and its derivatives: Past, present, and future10.1002/(SICI)1521-4095(200004)12:7<481::AID-ADMA481>3.0.CO;2-C ↗
10. Highly efficient solution-processed thermally activated delayed fluorescence bluish-green and hybrid white organic light-emitting diodes using novel bipolar host materials10.1021/acsami.9b14168 ↗
11. Tunable electroluminescence properties in CdSe/PVK guest-host based light-emitting devices10.1039/c4cp00066h ↗
12. Transfer printing of polymer light-emitting devices with a small molecular seeding layer featuring thermally activated delayed fluorescence for triplet harvesting10.1039/C9NH00431A ↗
13. Highly efficient solution-processed deep-red organic light-emitting diodes based on an exciplex host composed of a hole transporter and a bipolar host10.1021/acs.jpclett.7b02326 ↗
14. Effective approaches to improve the electrical conductivity of PEDOT:PSS: a review10.1002/aelm.201500017 ↗
15. Feasible modification of PEDOT:PSS by poly(4-styrenesulfonic acid): a universal method to double the efficiencies for solution-processed organic light-emitting devices10.1021/acsami.9b09346 ↗
16. Highly efficient flexible perovskite light-emitting diodes using the modified PEDOT:PSS hole transport layer and polymer-silver nanowire composite electrode10.1021/acsami.9b10771 ↗
17. Multicolored organic/inorganic hybrid perovskite light-emitting diodes10.1002/adma.201403751 ↗
18. Efficient flexible organic/inorganic hybrid perovskite light-emitting diodes based on graphene anode10.1002/adma.201605587 ↗
19. Self-organized gradient hole injection to improve the performance of polymer electroluminescent devices10.1002/adfm.200600278 ↗
20. Highly efficient, simplified, solution-processed thermally activated delayed-fluorescence organic light-emitting diodes10.1002/adma.201504490 ↗
21. Perfluorinated ionomer-modified hole-injection layers: ultrahigh-workfunction but nonohmic contacts10.1002/adfm.201500784 ↗
22. Influence of perfluorinated ionomer in PEDOT:PSS on the rectification and degradation of organic photovoltaic cells10.1039/C8TA04098B ↗
23. Halogenated π-conjugated polymeric emitters with thermally activated delayed fluorescence for highly efficient polymer light emitting diodes10.1016/j.nanoen.2020.104800 ↗
24. Highly efficient white-emitting thermally activated delayed fluorescence polymers: synthesis, non-doped white OLEDs and electroluminescent mechanism
25. The design, synthesis and performance of thermally activated delayed fluorescence macromolecules10.1039/D0PY00096E ↗
26. Molecular design and device performance of thermally activated delayed fluorescent polymer materials
27. Thermally activated delayed fluorescence conjugated polymers with backbone-donor/pendant-acceptor architecture for nondoped OLEDs with high external quantum efficiency and low roll-off10.1002/adfm.201706916 ↗
28. Solvent dependent behaviour of poly(9-vinylcarbazole)-based polymer light emitting diodes10.1016/j.sse.2010.04.007 ↗
29. White polymer light emitting diodes based on PVK: the effect of the electron injection barrier on transport properties, electroluminescence and controlling the electroplex formation10.1039/C6CP07092B ↗
30. Blue emission from polymer light-emitting diodes using non-conjugated polymer blends with air-stable electrodes10.1016/0379-6779(94)02339-Z ↗