journal article·2026-04Open access

3D coaxial bioprinting of RADA16-I self-assembling peptide hydrogel

M. Jergitsch, S. Perez-Amodio, L.M. Delgado, R.A. Perez, M.A. Mateos-Timoneda

Abstract

Peptides that self-assemble into hydrogels provide a dynamic microenvironment for various cell types. Combining top-down extrusion 3D bioprinting with bottom-up self-assembly of peptide hydrogels offers an innovative approach to biofabrication. However, modest mechanical properties of peptide hydrogels pose challenges for extrusion 3D bioprinting. This study introduces RADA16-I peptide hydrogels for bioprinting by leveraging the potential of coaxial extrusion to print mechanically soft hydrogels. A coaxial 3D bioprinter was employed to co-extrude a RADA16-I peptide core supplemented with methylcellulose (MC) and sucrose, surrounded by an MC-alginate composite hydrogel shell. The phosphate-buffered MC-alginate shell provides stability and initiates the RADA16-I hydrogel self-assembly post-extrusion. Rheological characterization confirmed the increase in viscosity of the RADA16-I core solution without compromising self-assembly (G′ ≈ 100 Pa). Core extrusion ratio was set to 20% to balance filament stability and soft-core content. Printed scaffolds maintained excellent shape fidelity and structural integrity over a 21-day culture period, with gradual MC release (≈90%) creating an open-porous shell structure. Mesenchymal stem cells (MSCs) encapsulated in the RADA-MC core hydrogel tended to aggregate, forming a dense collagen network with calcium phosphate deposition. Bioprinted cell-laden scaffolds displayed a homogeneous distribution of viable cells (>90%). In conclusion, this approach successfully introduced self-assembling peptide hydrogels to bioprinting technology, offering a promising strategy for biofabrication. • Methylcellulose improved printability without impairing peptide self-assembly • MC-alginate shell buffered pH and stabilized printed RADA16-I hydrogel core • Bioprinted scaffolds showed high MSC viability • Gradual MC release formed porous scaffolds supporting long-term cell culture • RADA-MC hydrogel supported osteogenic differentiation
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Supramolecular Self-Assembly in Materials · Hydrogels: synthesis, properties, applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Bioprinting: from tissue and organ development to in vitro models10.1021/acs.chemrev.9b00789 ↗
2. 3d extrusion bioprinting: rational bioink design and advanced fabrication techniques
3. 3d bioprinting of tissues and organs10.1038/nbt.2958 ↗
4. 3d extrusion bioprinting10.1038/s43586-021-00073-8 ↗
5. Advances of naturally derived biomedical polymers in tissue engineering10.3389/fchem.2024.1469183 ↗
6. Engineering bioactive synthetic polymers for biomedical applications: a review with emphasis on tissue engineering and controlled release10.1039/D1MA00092F ↗
7. 25th anniversary article: engineering hydrogels for biofabrication10.1002/adma.201302042 ↗
8. Pushing the rheological and mechanical boundaries of extrusion-based 3D bioprinting10.1016/j.tibtech.2022.01.001 ↗
9. A generalizable strategy for the 3D bioprinting of hydrogels from nonviscous photo-crosslinkable inks10.1002/adma.201604983 ↗
10. Microfluidic bioprinting of heterogeneous 3D tissue constructs using low-viscosity bioink10.1002/adma.201503310 ↗
11. Embedded extrusion printing in yield-stress-fluid baths10.1016/j.matt.2022.09.003 ↗
12. 3D bioprinting of collagen-based high-resolution internally perfusable scaffolds for engineering fully biologic tissue systems10.1126/sciadv.adu5905 ↗
13. Fabrication and validation of an affordable DIY coaxial 3D extrusion bioprinter10.1038/s41598-025-06478-9 ↗
14. Coaxial extrusion bioprinting of 3D microfibrous constructs with cell-favorable gelatin methacryloyl microenvironments10.1088/1758-5090/aa9d44 ↗
15. Biomimetic peptide self-assembly for functional materials10.1038/s41570-020-0215-y ↗
16. Synthetic extracellular matrices with function-encoding peptides10.1038/s44222-023-00055-3 ↗
17. Biological activity of self-assembled peptide hydrogel scaffold RADA-RGD and its experimental study of BMP-2 release in vitro10.1016/j.colsurfa.2023.133048 ↗
18. D-RADA16 self-assembling peptide microneedle patches alleviate osteoarthritis inflammation by inhibiting mtDNA leakage-mediated cGAS–STING pathway
19. Clinical use of the self-assembling peptide RADA16: a review of current and future trends in biomedicine10.3389/fbioe.2021.679525 ↗
20. Three-dimensional primary hepatocyte culture in synthetic self-assembling peptide hydrogel10.1089/tea.2007.0143 ↗
21. Self-assembly-peptide hydrogels as tissue- engineering scaffolds for three-dimensional culture of chondrocytes in vitro10.1002/mabi.200900450 ↗
22. Neural stem cells encapsulated in a functionalized self-assembling peptide hydrogel for brain tissue engineering10.1016/j.biomaterials.2012.11.043 ↗
23. Differentiated adipose-derived stem cell co- cultures for bone regeneration in rada16-i in vitro10.1002/jcp.26838 ↗
24. Functionalized self-assembling peptide nanofiber hydrogels mimic stem cell niche to control human adipose stem cell behavior in vitro10.1016/j.actbio.2013.01.027 ↗
25. Three-dimensional cultures of human subcutaneous adipose tissue-derived progenitor cells based on rad16-i self-assembling peptide, Tissue Eng10.1089/ten.tec.2015.0270 ↗
26. C. L. Hedegaard, A. Mata, Integrating self-assembly and biofabrication for the development of structures with enhanced complexity and hierarchical control, Biofabrication 12 (202)032002. https://doi.org/10.1088/1758-5090/ab84cb.10.1088/1758-5090/ab84cb ↗
27. Development of a self-assembled peptide/methylcellulose-based bioink for 3d bioprinting10.1002/mame.201900353 ↗
28. Matrix dimensions, stiffness, and structural properties modulate spontaneous chondrogenic commitment of mouse embryonic fibroblasts10.1089/ten.tea.2013.0369 ↗
29. Development of a three-dimensional bone- like construct in a soft self-assembling peptide matrix10.1089/ten.tea.2012.0077 ↗
30. Development of a three-dimensional bioengineered platform for articular cartilage regeneration10.3390/biom10010052 ↗
31. Ultrashort peptide bioinks support automated printing of large-scale constructs assuring long-term survival of printed tissue constructs10.1021/acs.nanolett.0c04426 ↗
32. Alsanie
33. Xu
34. Kirillov
35. Segment anything model for medical image analysis: an experimental study10.1016/j.media.2023.102918 ↗
36. Optimization of gelatin–alginate composite bioink printability using rheological parameters: a systematic approach10.1088/1758-5090/aacdc7 ↗
37. Nih image to imagej: 25 years of image analysis10.1038/nmeth.2089 ↗
38. Array programming with NumPy10.1038/s41586-020-2649-2 ↗
39. Matplotlib: a 2d graphics environment10.1109/MCSE.2007.55 ↗
40. Polydopamine incorporation enhances cell differentiation and antibacterial properties of 3d-printed guanosine-borate hydrogels for functional tissue regeneration10.3390/ijms24044224 ↗
41. Three-dimensional plotting of a cell-laden alginate/methylcellulose blend: towards biofabrication of tissue engineering constructs with clinically relevant dimensions10.1002/term.2058 ↗
42. Methylcellulose–a versatile printing material that enables biofabrication of tissue equivalents with high shape fidelity10.1039/D0BM00027B ↗
43. A systematic approach to improve printability and cell viability of methylcellulose-based bioinks10.1016/j.ijbiomac.2023.127461 ↗
44. Investigating the effect of sterilisation methods on the physical properties and cytocompatibility of methyl cellulose used in combination with alginate for 3D-bioplotting of chondrocytes10.1007/s10856-018-6211-9 ↗
45. Three-dimensional plotting of a cell-laden alginate/methylcellulose blend: towards biofabrication of tissue engineering constructs with clinically relevant dimensions10.1002/term.2058 ↗
46. Corte · 2024
47. Effects of extra- cellular matrix viscoelasticity on cellular behaviour10.1038/s41586-020-2612-2 ↗
48. Periodic heat stress licenses EMSC differentiation into osteoblasts via YAP signaling pathway activation
49. Shear stress induces osteogenic differentiation of human mesenchymal stem cells10.2217/rme.10.60 ↗
50. Advances in 3D peptide hydrogel models in cancer research10.1038/s41538-021-00096-1 ↗
51. Matrix viscoelasticity controls spatiotemporal tissue organization10.1038/s41563-022-01400-4 ↗
52. Effect of bioink properties on printability and cell viability for 3d bioplotting of embryonic stem cells10.1088/1758-5090/8/3/035020 ↗
53. “Engineering considerations on extrusion-based bioprinting: interactions of material behavior, mechanical forces and cells in the printing needle10.1088/1758-5090/ab7553 ↗