journal article·2021-12

Explore fused-ring core incorporated A-π-D-π-A type acceptors and their application in organic solar cells: Insight into molecular conformation, optical and electrochemical properties, film morphology, and energy loss

Zhuohan Zhang, Jintao Zhu, Yifan Lv, Ai Lan, Hong Lu, Fei Chen, Wei Huang

Dyes and Pigments· Volume 196
Publisher page

Abstract

Abstract Acceptor-π-Donor-π-Acceptor (A-π-D-π-A) type fused-ring electron acceptors (FREAs) are a class of important nonfullerene acceptors for fabricating high efficiency organic solar cells (OSCs). However, limited by the rare types of the central D core, the efficiencies of the OSCs based on A-π-D-π-A FREAs are falling behind. In this work, dithienopyrrolobenzothiadiazole (DTPBT) was employed in developing A-π-D-π-A type FREAs, and was assessed as a D core. DTPBT based FREAs were synthesized and compared with the typical A-π-D-π-A type FREAs using IDT as the D core, from aspects of molecular conformation, optical and electrochemical properties, blend film morphology, and energy loss. Compared to traditional IDT based A-π-D-π-A type FREAs (IRIC-4F), A-π-D-π-A FREAs containing DTPBT (BTOT-OD-4F) showed C-type molecular conformation, redshifted absorption and downshifted energy levels. As a result, the corresponding devices achieved an efficiency of over 13% with improved JSC of 23.44 mA cm−2 and a fair FF of 66.9%. Meanwhile, the energy loss of the PBDB-T: BTOT-OD-4F blends reduced effectively, due to the contribution of suppressed nonradiative recombination. Above all, DTPBT has presented its potential in developing highly efficient A-π-D-π-A type FREAs. To realize the best performance of the novel acceptors, further systematic and synergetic optimization of the molecule structure and device fabrication are needed. This work has demonstrated a new design manner of A-π-D-π-A type FREAs through exploring novel fused-ring cores, which facilitates reduced energy loss of the corresponding devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. The path to ubiquitous and low-cost organic electronic appliances on plastic10.1038/nature02498 ↗
2. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
3. Organic non-fullerene acceptors for organic photovoltaics10.1039/c0ee00668h ↗
4. Bulk heterojunction solar cells: morphology and performance relationships10.1021/cr400353v ↗
5. 25th anniversary article: a decade of organic/polymeric photovoltaic research10.1002/adma.201302563 ↗
6. Non-fullerene electron acceptors for use in organic solar cells10.1021/acs.accounts.5b00199 ↗
7. New phase for organic solar cell research: emergence of Y-series electron acceptors and their perspectives10.1021/acsenergylett.0c00537 ↗
8. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
9. Single-layered organic photovoltaics with double cascading charge transport pathways: 18% efficiencies10.1038/s41467-020-20580-8 ↗
10. Layer-by-layer processed ternary organic photovoltaics with efficiency over 18%10.1002/adma.202007231 ↗
11. Asymmetric electron acceptors for high-efficiency and low-energy-loss organic photovoltaics10.1002/adma.202001160 ↗
12. Enabling low voltage losses and high photocurrent in fullerene-free organic photovoltaics10.1038/s41467-019-08386-9 ↗
13. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
14. Delocalization of exciton and electron wavefunction in non-fullerene acceptor molecules enables efficient organic solar cells10.1038/s41467-020-17867-1 ↗
15. A Non-fullerene acceptor with enhanced intermolecular pi-core interaction for high-performance organic solar cells10.1021/jacs.0c07083 ↗
16. Crystal engineering in organic photovoltaic acceptors: a 3D network approach10.1002/aenm.202002678 ↗
17. Reducing voltage losses in the A-DA'D-A acceptor-based organic solar cells10.1016/j.chempr.2020.08.003 ↗
18. A-DA'D-A non-fullerene acceptors for high-performance organic solar cells10.1007/s11426-020-9799-4 ↗
19. Efficient nonfullerene polymer solar cells enabled by a novel wide bandgap small molecular acceptor10.1002/adma.201606054 ↗
20. Design, synthesis, and photovoltaic characterization of a small molecular acceptor with an ultra-narrow band gap10.1002/anie.201610944 ↗
21. Achievement of high Voc of 1.02 V for P3HT-based organic solar cell using a benzotriazole-containing non-fullerene acceptor10.1002/aenm.201602269 ↗
22. High-efficiency as-cast organic solar cells based on acceptors with steric hindrance induced planar terminal group10.1002/aenm.201901280 ↗
23. Exploiting noncovalently conformational locking as a design strategy for high performance fused-ring electron acceptor used in polymer solar cells10.1021/jacs.7b00566 ↗
24. Efficient semitransparent solar cells with high NIR responsiveness enabled by a small-bandgap electron acceptor10.1002/adma.201606574 ↗
25. A Thieno[3,4-b]thiophene-based non-fullerene electron acceptor for high-performance bulk-heterojunction organic solar cells10.1021/jacs.6b08523 ↗
26. Non-fullerene polymer solar cells based on a selenophene-containing fused-ring acceptor with photovoltaic performance of 8.6%10.1039/C6EE00315J ↗
27. High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor10.1038/ncomms11585 ↗
28. Near-infrared absorbing non-fullerene acceptors with selenophene as π bridges for efficient organic solar cells10.1039/C8TA00783G ↗
29. Enhancing performance of non-fullerene organic solar cells via side chain engineering of fused-ring electron acceptors10.1016/j.dyepig.2016.12.065 ↗
30. The influence of the π-bridging unit of fused-ring acceptors on the performance of organic solar cells10.1039/C8TA08410F ↗
31. A new wide bandgap small molecular acceptor based on indenofluorene derivatives for fullerene-free organic solar cells10.1016/j.dyepig.2017.01.039 ↗
32. A twisted thieno[3,4-b]thiophene-based electron acceptor featuring a 14-pi-electron indenoindene core for high-performance organic photovoltaics10.1002/adma.201704510 ↗
33. Bandgap narrowing in non-fullerene acceptors: single atom substitution leads to high optoelectronic response beyond 1000 nm10.1002/aenm.201801212 ↗
34. Extended conjugation length of nonfullerene acceptors with improved planarity via noncovalent interactions for high-performance organic solar cells10.1002/aenm.201801618 ↗
35. Nonfullerene acceptors with enhanced solubility and ordered packing for high-efficiency polymer solar cells10.1021/acsenergylett.8b00928 ↗
36. Multiwfn: a multifunctional wavefunction analyzer10.1002/jcc.22885 ↗
37. Quantitative analysis of molecular surface based on improved Marching Tetrahedra algorithm10.1016/j.jmgm.2012.07.004 ↗
38. VMD: visual molecular dynamics10.1016/0263-7855(96)00018-5 ↗
39. Critical role of molecular electrostatic potential on charge generation in organic solar cells10.1002/cjoc.201800015 ↗
40. Achieving fast charge separation and low nonradiative recombination loss by rational fluorination for high-efficiency polymer solar cells10.1002/adma.201905480 ↗
41. Reduced nonradiative energy loss caused by aggregation of nonfullerene acceptor in organic solar cells10.1002/aenm.201901823 ↗
42. Fine-tuning of the chemical structure of photoactive materials for highly efficient organic photovoltaics10.1038/s41560-018-0263-4 ↗
43. Detailed balance and reciprocity in solar cells10.1002/pssa.200880458 ↗