Wide bandgap donor polymers containing carbonyl groups for efficient non-fullerene polymer solar cells
Source abstract
Abstract
Abstract Two wide bandgap conjugated polymers (PTCO8 and PTCO1) with different side chains, composed of alkylcarbonyl-substituted thiophene (TOC) as the electron-withdrawing unit and two-dimension benzodithiophene (BDT) as the electron-donating unit, are developed for non-fullerene polymer solar cells (PSCs). Relative to non-carbonyl-substituted control polymer PTC8, PTCO8 and PTCO1 exhibit a red-shifted absorption and deeper-lying highest occupied molecular orbital (HOMO) level. When blended with ITIC, the as-cast PTCO1-based devices yield a power conversion efficiency of up to 9.33% with an open-circuit voltage of 0.95 V, a short-circuit current density of 16.91 mA cm−2, and a fill factor of 57.9%, outperforming those of PTC8-based devices (4.04%) and PTCO8-based devices (5.91%). This work demonstrates that the carbonyl group is a promising electron-deficient moiety to construct wide-bandgap polymers for non-fullerene PSCs. Adjusting the length of side chains is a feasible strategy to improve PSC performance further.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
2. Flexible and semitransparent organic solar cells10.1002/aenm.201701791 ↗
3. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
4. Polymer solar cells10.1038/nphoton.2012.11 ↗
5. Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing10.1039/c0jm01178a ↗
6. A cost analysis of fully solution-processed ITO-free organic solar modules10.1002/aenm.201802521 ↗
7. Two-layer organic photovoltaic cell10.1063/1.96937 ↗
8. Polymer photovoltaic cells:enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
9. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
10. Mesoscopic features of charge generation in organic semiconductors10.1021/ar5000852 ↗
11. Nonfullerene all-small-molecule organic solar cells10.1021/acsenergylett.9b00528 ↗
12. Material insights and challenges for non-fullerene organic solar cells based on small molecular acceptors10.1038/s41560-018-0181-5 ↗
13. Nonfullerene acceptor molecules for bulk heterojunction organic solar cells10.1021/acs.chemrev.7b00535 ↗
14. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
15. Analyzing the efficiency, stability and cost potential for fullerene-free organic photovoltaics in one figure of merit10.1039/C8EE00151K ↗
16. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
17. Next-generation organic photovoltaics based on non-fullerene acceptors10.1038/s41566-018-0104-9 ↗
18. Non-fullerene electron acceptors for use in organic solar cells10.1021/acs.accounts.5b00199 ↗
19. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
20. Solution‐Processed polymer solar cells with over 17% efficiency enabled by an iridium complexation approach10.1002/aenm.202000590 ↗
21. 18% efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
22. Single-junction organic photovoltaic cells with approaching 18% efficiency10.1002/adma.201908205 ↗
23. 17% efficient organic solar cells based on liquid exfoliated WS2 as a replacement for PEDOT:PSS10.1002/adma.201902965 ↗
24. A large-bandgap conjugated polymer for versatile photovoltaic applications with high performance10.1002/adma.201502110 ↗
25. A wide-bandgap D-A copolymer donor based on a chlorine substituted acceptor unit for high performance polymer solar cells10.1039/C9TA03272J ↗
26. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
27. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
28. Fused benzothiadiazole: a building block for n-type organic acceptor to achieve high-performance organic solar cells10.1002/adma.201807577 ↗
29. Fused tris(thienothiophene)-based electron acceptor with strong near-infrared absorption for high-performance as-cast solar cells10.1002/adma.201705969 ↗
30. High efficiency near-infrared and semitransparent non-fullerene acceptor organic photovoltaic cells10.1021/jacs.7b11278 ↗
31. Improved efficiency of polymer solar cells by modifying the side chain of wide-band gap conjugated polymers containing pyrrolo[3,4-f]benzotriazole-5,7(6H)-dione moiety10.1021/acsami.8b05700 ↗
32. High-performance thick-film all-polymer solar cells created via ternary blending of a novel wide-bandgap electron-donating copolymer10.1002/aenm.201703085 ↗
33. Fine-tuning of the chemical structure of photoactive materials for highly efficient organic photovoltaics10.1038/s41560-018-0263-4 ↗
34. High-performance nonfullerene polymer solar cells based on imide-functionalized wide-bandgap polymers10.1002/adma.201606396 ↗
35. A simple approach to prepare chlorinated polymer donors with low-lying HOMO level for high performance polymer solar cells10.1021/acs.chemmater.8b05352 ↗
36. Effect of alkylsilyl side-chain structure on photovoltaic properties of conjugated polymer donors10.1002/aenm.201702324 ↗
37. Side chain engineering on medium bandgap copolymers to suppress triplet formation for high-efficiency polymer solar cells10.1002/adma.201703344 ↗
38. A wide-bandgap donor polymer for highly efficient non-fullerene organic solar cells with a small voltage loss10.1021/jacs.7b01606 ↗
39. Donor polymer design enables efficient non-fullerene organic solar cells
40. High-efficiency nonfullerene polymer solar cells with medium bandgap polymer donor and narrow bandgap organic semiconductor acceptor10.1002/adma.201601595 ↗
41. Non-fullerene polymer solar cells based on alkylthio and fluorine substituted 2D-conjugated polymers reach 9.5% efficiency10.1021/jacs.6b01744 ↗
42. 11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor10.1038/ncomms13651 ↗
43. A wide bandgap conjugated polymer donor based on alkoxyl-fluorophenyl substituted benzodithiophene for high performance non-fullerene polymer solar cells10.1039/C8TA11006A ↗
44. Achieving over 15% efficiency in organic photovoltaic cells via copolymer design10.1002/adma.201808356 ↗
45. Over 14% efficiency in polymer solar cells enabled by a chlorinated polymer donor10.1002/adma.201800868 ↗
46. High-performance nonfullerene polymer solar cells with open-circuit voltage over 1 V and energy loss as low as 0.54 eV10.1016/j.nanoen.2017.07.047 ↗
47. Replacing alkoxy groups with alkylthienyl groups: a feasible approach to improve the properties of photovoltaic polymers10.1002/anie.201103313 ↗
48. Synthesis of a low band gap polymer and its application in highly efficient polymer solar cells10.1021/ja9064975 ↗
49. Benzodithiophene-thiophene-based photovoltaic polymers with different side-chains10.1002/pola.27516 ↗
50. The effect of aggregation behavior on photovoltaic performances in benzodithiophene-thiazolothiazole-based wide bandgap conjugated polymers with side chain position changes10.1039/C9PY01438A ↗
51. All-polymer solar cells: impact of the length of the branched alkyl side chains on the polymer acceptors on the interchain packing and electronic properties in amorphous blends10.1021/acs.chemmater.9b02284 ↗
52. Improving molecular planarity by changing alkyl chain position enables 12.3% efficiency all‐small‐molecule organic solar cells with enhanced carrier lifetime and reduced recombination10.1002/solr.201900326 ↗
53. Steric engineering of alkylthiolation side chains to finely tune miscibility in nonfullerene polymer solar cells10.1002/aenm.201802686 ↗
54. Backbone conformation tuning of carboxylate-functionalized wide band gap polymers for efficient non-fullerene organic solar cells10.1021/acs.macromol.8b02360 ↗
55. Alkyl side-chain engineering in wide-bandgap copolymers leading to power conversion efficiencies over 10%10.1002/adma.201604251 ↗
56. Side-chain engineering for efficient non-fullerene polymer solar cells based on a wide-bandgap polymer donor10.1039/C7TA02075A ↗
57. Effect of alkyl side chains of conjugated polymer donors on the device performance of non-fullerene solar cells10.1021/acs.macromol.6b01326 ↗
58. Enhanced photovoltaic performance of indacenodithiophene-quinoxaline copolymers by side-chain modulation10.1002/aenm.201400680 ↗
59. Recent development of push-pull conjugated polymers for bulk-heterojunction photovoltaics: rational design and fine tailoring of molecular structures10.1039/c2jm30470h ↗
60. Side-chain engineering of wide-bandgap polymers based on benzo[1,2-b:4,5-b′]dithiophene and [2,2′-bithiophene]-4,4′-dicarboxylate for fullerene-free organic solar cells10.1039/C9TC02296A ↗
61. Effect of linear side-chain length on the photovoltaic performance of benzodithiophene-alt-dicarboxylic ester terthiophene polymers10.1039/C9NJ02484K ↗
62. Surface plasmonic effects of metallic nanoparticles on the performance of polymer bulk heterojunction solar cells10.1021/nn102295p ↗
63. Towards reliable charge-mobility benchmark measurements for organic semiconductors10.1016/j.orgel.2014.02.008 ↗
64. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗
65. Intensity dependence of current-voltage characteristics and recombination in high-efficiency solution-processed small-molecule solar cells10.1021/nn401267s ↗