journal article·2025-04Open access

In-vivo and ex-vivo evaluation of bio-inspired structures fabricated via PBF-LB for biomedical applications

Miguel Araya, Antti Järvenpää, Timo Rautio, Rafael Vindas, Roberto Estrada, Mylène de Ruijter, Teodolito Guillén

Abstract

Titanium-based lattice structures have gained significant attention in biomedical engineering due to their potential to mimic bone-like behavior and improve implant performance. This study evaluates the performance of bio-inspired Ti64 TPMS Gyroyd and Stochastic lattice structures fabricated via Powder Bed Fusion-Laser Beam (PBF-LB), focusing on their in-vivo and ex-vivo mechanical and biological responses for biomedical applications. Utilizing an SLM 280 HL printer, samples exhibited notable geometric accuracy essential for mechanical integrity. The study highlights significant mechanical properties and geometric precision improvements achieved through chemical etching. Mechanical characterization revealed that the as-built Gyroid lattice had the highest elastic modulus (3.64 GPa) and yield strength (200.65 MPa), which improved post-etching (3.62 GPa and 219.35 MPa, respectively). The Stochastic lattice demonstrated lower yield strength values post-etching (169.81 MPa). In-vivo analyses in horse models, both structures demonstrated excellent biocompatibility and osseointegration with no adverse inflammatory responses. Ex-vivo push-out tests showed that the chemically etched Gyroid structure achieved the highest resistance to push-out force (1645.407 N) and most significant displacement (2.754 mm), indicating superior energy absorption (4920.425 mJ). These findings underscore the critical influence of microstructural design and surface treatments on implant functionality, offering novel insights into improving biomedical implant performance through lattice architecture and post-processing. • Fabricated Ti64 lattice structures using the PBF-LB method showed high geometric accuracy and improved mechanical properties upon etching. • Gyroid lattices demonstrated better mechanical performance and osseointegration compared to Stochastic structures. • In-vivo testing confirmed the biocompatibility of Ti64 implants, with no adverse reactions and excellent bone integration. • Ex-vivo biomechanical testing highlighted superior mechanical stability and energy absorption of chemically etched Gyroid lattices. • The study underscores the pivotal role of lattice design and post-processing in optimizing biomedical implants for better clinical outcomes.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. A review on in vitro/in vivo response of additively manufactured Ti–6Al–4V alloy10.1039/D2TB01616H ↗
2. Titanium-Based alloys and composites for orthopedic implants Applications: a comprehensive review10.1016/j.matdes.2024.112850 ↗
3. Ultrahigh-strength titanium gyroid scaffolds manufactured by selective laser melting (SLM) for bone implant applications10.1016/j.actamat.2018.08.005 ↗
4. A review on biomedical titanium alloys: recent progress and prospect10.1002/adem.201801215 ↗
5. Anisotropic Ti-6Al-4V gyroid scaffolds manufactured by electron beam melting (EBM) for bone implant applications10.1016/j.matdes.2017.10.040 ↗
6. Effect of geometry on the mechanical properties of Ti-6Al-4V Gyroid structures fabricated via SLM: a numerical study10.1016/j.matdes.2019.108165 ↗
7. Microstructure and mechanical properties of open-cellular biomaterials prototypes for total knee replacement implants fabricated by electron beam melting10.1016/j.jmbbm.2011.05.010 ↗
8. Selective Laser Melting of Ti6Al4V sub-millimetric cellular structures: prediction of dimensional deviations and mechanical performance10.1016/j.jmbbm.2020.104123 ↗
9. Gyroid porous titanium structures: a versatile solution to be used as scaffolds in bone defect reconstruction10.1016/j.matdes.2017.11.050 ↗
10. Synthetic bone: design by additive manufacturing10.1016/j.actbio.2019.07.049 ↗
11. Additively manufactured metallic porous biomaterials based on minimal surfaces: a unique combination of topological, mechanical, and mass transport properties10.1016/j.actbio.2017.02.024 ↗
12. Shape optimization of additively manufactured lattices based on triply periodic minimal surfaces
13. Structure-property relationships of imperfect additively manufactured lattices based on triply periodic minimal surfaces10.1016/j.matdes.2022.111036 ↗
14. Compressive anisotropy of sheet and strut based porous Ti–6Al–4V scaffolds10.1016/j.jmbbm.2020.104243 ↗
15. Fatigue properties of Ti-6Al-4V Gyroid graded lattice structures fabricated by laser powder bed fusion with lateral loading
16. Controlling the mechanical behaviour of stochastic lattice structures: the key role of nodal connectivity
17. The influence of laser parameters and scanning strategies on the mechanical properties of a stochastic porous material10.1016/j.matdes.2017.06.041 ↗
18. 3D printable bone-mimicking functionally gradient stochastic scaffolds for tissue engineering and bone implant applications10.1016/j.matdes.2022.111199 ↗
19. Additively manufactured 3D porous Ti-6Al-4V constructs mimic trabecular bone structure and regulate osteoblast proliferation, differentiation and local factor production in a porosity and surface roughness dependent manner10.1088/1758-5082/6/4/045007 ↗
20. Additive manufacturing of biomimetic Titanium-Tantalum lattices for biomedical implant applications10.1016/j.matdes.2022.110688 ↗
21. Compressive properties of Ti-6Al-4V lattice structures fabricated by selective laser melting: design, orientation and density
22. Additive manufacturing of titanium-based lattice structures for medical applications – a review10.1016/j.bprint.2023.e00267 ↗
23. An overview of 3D printed metal implants in orthopedic applications: present and future perspectives
24. Manufacturability, mechanical properties, mass-transport properties and biocompatibility of triply periodic minimal surface (TPMS) porous scaffolds fabricated by selective laser melting10.1016/j.matdes.2020.109034 ↗
25. Fabrication of Ti-6Al-4v cellular lattice structure using selective laser melting for orthopedic use: a review
26. Patient-specific Ti-6Al-4V lattice implants for critical-sized load-bearing bone defects reconstruction10.1016/j.matdes.2023.111605 ↗
27. Compressive performance of an arbitrary stiffness matched anatomical Ti64 implant manufactured using Direct Metal Laser Sintering10.1016/j.matdes.2018.11.005 ↗
28. Enhanced bone formation in locally-optimised, low-stiffness additive manufactured titanium implants: an in silico and in vivo tibial advancement study10.1016/j.actbio.2022.04.006 ↗
29. Ti based biomaterials, the ultimate choice for orthopaedic implants – a review10.1016/j.pmatsci.2008.06.004 ↗
30. Chemical leveling mechanism and oxide film properties of additively manufactured Ti–6Al–4V alloy10.1007/s10853-019-03855-4 ↗
31. Nanofracturing: a new technique for bone marrow stimulation in equine cartilage repair10.21836/PEM20200201 ↗
32. The use of a cartilage decellularized matrix scaffold for the repair of osteochondral defects: the importance of long-term studies in a large animal model10.1016/j.joca.2016.08.005 ↗
33. Long-term in vivo performance of low-temperature 3D-printed bioceramics in an equine model10.1021/acsbiomaterials.9b01819 ↗
34. Orthotopic bone regeneration within 3D printed bioceramic scaffolds with region‐dependent porosity gradients in an equine model10.1002/adhm.201901807 ↗
35. 3D printing of a titanium-tantalum Gyroid scaffold with superb elastic admissible strain, bioactivity and in-situ bone regeneration capability
36. Micro/nano hierarchical structured titanium treated by NH4OH/H2O2 for enhancing cell response10.1371/journal.pone.0196366 ↗
37. The effects of chemical etching and ultra-fine grain structure of titanium on MG-63 cells response10.3390/met11030510 ↗
38. Enhanced osseointegrative properties of ultra-fine-grained titanium implants modified by chemical etching and atomic layer deposition10.1021/acsbiomaterials.8b00342 ↗
39. Compressive mechanical properties and energy absorption characteristics of SLM fabricated Ti6Al4V triply periodic minimal surface cellular structures10.1016/j.mechmat.2022.104241 ↗
40. Continuous graded Gyroid cellular structures fabricated by selective laser melting: design, manufacturing and mechanical properties10.1016/j.matdes.2018.12.007 ↗
41. Bioactive Ti metal analogous to human cancellous bone: fabrication by selective laser melting and chemical treatments10.1016/j.actbio.2010.09.034 ↗
42. Improving the fatigue performance of porous metallic biomaterials produced by Selective Laser Melting10.1016/j.actbio.2016.10.005 ↗
43. Fatigue performance of additively manufactured Ti-6Al-4V: surface condition vs. Internal defects10.1007/s11837-020-04025-7 ↗
44. Improved osseointegration of 3D printed Ti-6Al-4V implant with a hierarchical micro/nano surface topography: an in vitro and in vivo study10.1016/j.msec.2020.111505 ↗
45. A biomechanical evaluation on Cubic, Octet, and TPMS gyroid Ti6Al4V lattice structures fabricated by selective laser melting and the effects of their debris on human osteoblast-like cells10.1016/j.bioadv.2022.212829 ↗
46. Fatigue behavior of As-built selective laser melted titanium scaffolds with sheet-based gyroid microarchitecture for bone tissue engineering10.1016/j.actbio.2019.05.046 ↗
47. Compressive properties of imperfect Ti-6Al-4V lattice structure fabricated by electron beam powder bed fusion under static and dynamic loadings
48. Configuration optimization design of Ti6Al4V lattice structure formed by SLM10.3390/ma11101856 ↗
49. Biomechanics of cellular solids10.1016/j.jbiomech.2004.09.027 ↗
50. Mechanical properties of additively manufactured metal lattice structures: data review and design interface
51. Vibration characteristics of additive manufactured IWP-type TPMS lattice structures10.1016/j.compstruct.2023.117642 ↗
52. Osseointegration of 3D porous and solid Ti–6Al–4V implants - narrow gap push-out testing and experimental setup considerations10.1016/j.jmbbm.2020.104282 ↗
53. Feasibility evaluation of a new lattice for porous surface design in additive manufacturing medical implants under interfacial tensile bonded testing
54. Comparative analysis of bone ingrowth in 3D-printed titanium lattice structures with different patterns10.3390/ma16103861 ↗
55. Surface-treated 3D printed Ti-6Al-4V scaffolds with enhanced bone regeneration performance: an in vivo study
56. In vivo bone progression in and around lattice implants additively manufactured with a new titanium alloy10.3390/app13127282 ↗