X-ray composite fibrous color dosimeter based on 10,12-pentacosadiynoic acid
Source abstract
Abstract
Abstract An X-ray dosimeter is a device that detects and quantifies X-ray radiation. There is demand for a useful dosimeter with high sensitivity that works independently, has a low cost, and can be mass produced. In this study, a 10,12-pentacosadiynoic acid (PCDA)-based composite fibrous color dosimeter (CFCD) is developed for X-ray visualization and quantification on the order of a few grays (Gy). This CFCD is successfully prepared from PCDA and polylactic acid (PLA) using the centrifugal spinning (CS) method. The CFCD undergoes a color transition from white to deep blue with X-ray exposure in the range from 2.2 to 40 Gy. This color change is attributed to the polymerization process of PCDA. The prepared CFCD is a useful device for the detection and quantification of X-rays, exhibiting a maximum sensitivity of 2.2 Gy due to PCDA.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polydiacetylene-based materials and applications · Photochromic and Fluorescence Chemistry · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Performance of the H p (10) and H p (0.07) measurable electronic pocket dosimeter for gamma- and beta-rays10.1080/00223131.2008.10875828 ↗
2. Characterization of a medical X-ray machine for testing the response of electronic dosimeters in pulsed radiation fields10.1016/j.radphyschem.2013.10.019 ↗
3. Physical, morphological and dosimetric characterization of the Teflon agglutinator to thermoluminescent dosimetry10.1016/j.jlumin.2012.11.045 ↗
4. The early days of personal solar ultraviolet dosimetry10.3390/atmos11020125 ↗
5. Application of Gafchromic film in the study of dosimetry methods in CT phantoms10.1088/0952-4746/31/4/001 ↗
6. Synthesis and physical characteristics of radiophotoluminescent glass dosimeters10.1016/j.radmeas.2007.01.053 ↗
7. Occupational exposure from external radiation used in medical practices in Pakistan by film badge dosimetry10.1093/rpd/ncq134 ↗
8. The use of diazo film as a film badge dosimeter10.1080/00223638.1980.11738076 ↗
9. Radiation-induced colour changes in a spiropyran/BaFCl:Eu2+/polystyrene composite film and nonwoven fabric10.1039/C6NJ01661H ↗
10. Composite resin dosimeters: a new concept and design for a fibrous color dosimeter10.1021/acsami.8b00251 ↗
11. Leuco-based composite resin dosimeter film10.1021/acsomega.9b00435 ↗
12. X-ray visualization and quantification using fibrous color dosimeter based on leuco dye10.3390/app10113798 ↗
13. Fabrication and characterization of pectin hydrogel nanofiber scaffolds for differentiation of mesenchymal stem cells into vascular cells10.1021/acsbiomaterials.9b01178 ↗
14. Ultra-permeable polyamide membranes harvested by covalent organic framework nanofiber scaffolds: a two-in-one strategy10.1039/C9SC03088C ↗
15. Electrospinning of polymeric nanofibers for drug delivery applications10.1016/j.jconrel.2014.04.018 ↗
16. Self-inflating floating nanofiber membranes for controlled drug delivery10.1016/j.ijpharm.2020.119164 ↗
17. Lightweight, flexible and superhydrophobic composite nanofiber films inspired by nacre for highly electromagnetic interference shielding10.1016/j.compositesa.2019.105685 ↗
18. Sesamol incorporated cellulose acetate-zein composite nanofiber membrane: an efficient strategy to accelerate diabetic wound healing10.1016/j.ijbiomac.2020.01.277 ↗
19. Fabrication and characterization of a novel polysaccharide based composite nanofiber films with tunable physical properties10.1016/j.carbpol.2020.116054 ↗
20. High energy storage density and efficiency in aligned nanofiber filled nanocomposites with multilayer structure10.1016/j.compositesb.2020.108206 ↗
21. Branched aramid nanofiber-polyaniline electrodes for structural energy storage10.1039/D0NR04573J ↗
22. Facile and scalable fabrication of porous polystyrene fibers for oil removal by centrifugal spinning10.1021/acsomega.9b02091 ↗
23. Recycled PET as a PDMS-Functionalized electrospun fibrous membrane for oil-water separation10.1016/j.jece.2020.103921 ↗
24. High sensitivity temperature sensor based on fiber air-microbubble Fabry-Perot interferometer with PDMS-filled hollow-core fiber10.1016/j.sna.2018.03.044 ↗
25. Smart hydrogel-based optical fiber SPR sensor for pH measurements10.1016/j.snb.2018.01.120 ↗
26. Optical fiber pH sensor based on lossy-mode resonances by means of thin polymeric coatings10.1016/j.snb.2010.12.037 ↗
27. Barhoum · 2019
28. A review on electrospinning for membrane fabrication: challenges and applications10.1016/j.desal.2014.09.033 ↗
29. 2020
30. Centrifugally spun recycled PET: processing and characterization10.3390/polym10060680 ↗
31. Fabrication and photochromic properties of Forcespinning® fibers based on spiropyran-doped poly(methyl methacrylate)10.1039/C7RA03794E ↗
32. Effect of polymer concentration, rotational speed, and solvent mixture on fiber formation using Forcespinning®10.3390/fib4020020 ↗
33. Effect of solvent evaporation on fiber morphology in rotary jet spinning10.1021/la5023104 ↗
34. Nanofiber assembly by rotary jet-spinning10.1021/nl101355x ↗
35. Centrifugal spinning: an alternative approach to fabricate nanofibers at high speed and low cost10.1080/15583724.2014.935858 ↗
36. ForceSpun polydiacetylene nanofibers as colorimetric sensor for food spoilage detection10.1016/j.snb.2019.126734 ↗
37. Mechanically drawable thermochromic and mechanothermochromic polydiacetylene sensors10.1002/adfm.201504845 ↗
38. Radiation sensitive polyacrylonitrile microfibres doped with PDA nano-particles10.1016/j.radphyschem.2018.01.021 ↗
39. X-ray visualization and quantification using fibrous color dosimeter based on leuco dye
40. Leuco-based composite resin dosimeter film10.1021/acsomega.9b00435 ↗
41. Centrifugally spun recycled PET: processing and characterization10.3390/polym10060680 ↗
42. The viscosity of dilute solutions of long-chain molecules. IV. Dependence on concentration10.1021/ja01263a056 ↗
43. Molecular weights of celluloses and cellulose derivates10.1021/ie50346a023 ↗
44. Fabrication and photochromic properties of Forcespinning® fibers based on spiropyran-doped poly(methyl methacrylate)10.1039/C7RA03794E ↗
45. A simple model for nanofiber formation by rotary jet-spinning10.1063/1.3662015 ↗
46. Fabrication of conjugated polymer supramolecules in electrospun micro/nanofibers10.1002/macp.200800297 ↗
47. Impact of the fused deposition (FDM) printing process on polylactic acid (PLA) chemistry and structure10.3390/app7060579 ↗
48. Preparation, characterization, and sensing behavior of polydiacetylene liposomes embedded in alginate fibers10.1021/am900167r ↗
49. Photosynergetic amplification of radiation input: from efficient UV induced cycloreversion to sensitive X-ray detection10.1039/C9SC05380H ↗
50. Linearization of dose response curve for the radiochromic film dosimetry system10.1118/1.4736352 ↗
51. Technical note: homogeneity of gafchromic ® EBT2 film10.1118/1.3368601 ↗
52. Quantitative evaluation of radiochromic film response for two-dimensional dosimetry10.1118/1.598068 ↗
53. Post-irradiation colouration of Gafchromic EBT radiochromic film10.1088/0031-9155/50/20/N04 ↗