journal article·2020-07

Influences of the terminal groups on the performances of asymmetric small molecule acceptors-based polymer solar cells

Shengna Liu, Baofeng Zhao, Zhiyuan Cong, Qing Cheng, Weiping Wang, Hui Pan, Jianqun Liu, Haimei Wu, Chao Gao

Dyes and Pigments· Volume 178
Publisher page

Abstract

Abstract By altering the end-capping groups from 2-(3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile to 2-(5,6-difluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile and 2-(5,6-dichloro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile, three asymmetric non-fullerene electron-acceptors (T-TT, T-TT-4F, and T-TT-4Cl) containing thiophene–phenylene–thieno[3,2-b]thiophene fused-ring as the electron-donating core were synthesized. Although the three asymmetric molecules all have bent geometries, the di-fluorinated and di-chlorinated acceptors show bathochromically-shifted spectra, enhanced molar extinct coefficients, deepened molecular energy levels, and reduced dipole moments. When blending with a wide-bandgap polymer PM6 in inverted solar cells, the T-TT-based device exhibits the highest open-circuit voltage (VOC) of 0.966 V, while the T-TT-4Cl-based device has the biggest short-circuit current density (JSC) of 19.00 mA cm−2, and the T-TT-4F-based device possesses the best fill factor (FF) of 66.1%, a moderate VOC (0.859 V), and a medium JSC (18.48 mA cm−2). As a result of the above properties and parameters, the T-TT-4F- and T-TT-4Cl-based solar cells successfully achieved high power conversion efficiencies of 10.49% and 10.16%, in comparison with that of 9.70% for the T-TT-based device, illustrating the importance of the influences of the terminal groups on the performances of asymmetric small molecular acceptors-based polymer solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Polymer solar cells10.1038/nphoton.2012.11 ↗
2. Oligomer molecules for efficient organic photovoltaics10.1021/acs.accounts.5b00363 ↗
3. Non-fullerene acceptors for organic photovoltaics: an emerging horizon10.1039/C4MH00042K ↗
4. A high dielectric constant non-fullerene acceptor for efficient bulk-heterojunction organic solar cells10.1039/C7TA10136H ↗
5. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
6. Non-fullerene polymer solar cells based on a selenophene-containing fused-ring acceptor with photovoltaic performance of 8.6%10.1039/C6EE00315J ↗
7. 26 mA cm-2 jsc from organic solar cells with a low-bandgap nonfullerene acceptor10.1016/j.scib.2017.10.017 ↗
8. Fused nonacyclic electron acceptors for efficient polymer solar cells10.1021/jacs.6b12755 ↗
9. A new wide bandgap small molecular acceptor based on indenofluorene derivatives for fullerene-free organic solar cells10.1016/j.dyepig.2017.01.039 ↗
10. Achieving highly efficient nonfullerene organic solar cells with improved intermolecular interaction and open-circuit voltage10.1002/adma.201700254 ↗
11. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
12. Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells10.1002/adma.201602776 ↗
13. Over 14% efficiency in organic solar cells enabled by chlorinated nonfullerene small-molecule acceptors
14. A novel thiophene-fused ending group enabling an excellent small molecule acceptor for high-performance fullerene-free polymer solar cells with 11.8% efficiency10.1002/solr.201700044 ↗
15. Side-chain isomerization on an n-type organic semiconductor ITIC acceptor makes 11.77% high efficiency polymer solar cells10.1021/jacs.6b09110 ↗
16. A facile planar fused-ring electron acceptor for as-cast polymer solar cells with 8.71% efficiency10.1021/jacs.6b00853 ↗
17. Absorptive behaviors and photovoltaic performances enhancements of alkoxy-phenyl modified indacenodithieno[3,2-b]thiophene-based non-fullerene acceptors10.1021/acssuschemeng.7b03606 ↗
18. Significant enhancement of the photovoltaic performance of organic small molecule acceptors via side-chain engineering10.1039/C8TA01509K ↗
19. A new electron acceptor with meta-alkoxyphenyl side chain for fullerene-free polymer solar cells with 9.3% efficiency10.1002/advs.201700152 ↗
20. Nonfullerene polymer solar cells based on a main-chain twisted low-bandgap acceptor with power conversion efficiency of 13.2%10.1021/acsenergylett.8b00627 ↗
21. High-performance fullerene-free polymer solar cells featuring efficient photocurrent generation from dual pathways and low nonradiative recombination loss10.1021/acsenergylett.8b01824 ↗
22. Assessing energy offset between electron donor/acceptor interface in organic solar cells through radiative efficiency measurement10.1039/C9EE02939G ↗
23. Efficient polymer solar cells having high open-circuit voltage and low energy loss enabled by a main-chain twisted small molecular acceptor10.1021/acsami.9b03499 ↗
24. Effects of mono-fluorinated position at the end-capping groups on the performances of twisted non-fullerene acceptor-based polymer solar cells10.1021/acsami.9b18301 ↗
25. High-performance polymer solar cells with minimal energy loss enabled by a main-chain-twisted nonfullerene acceptor10.1021/acs.chemmater.9b01175 ↗
26. A twisted thieno[3,4-b]thiophene-based electron acceptor featuring a 14-π-Electron indenoindene core for high-performance organic photovoltaics10.1002/adma.201704510 ↗
27. High-efficiency small-molecule ternary solar cells with a hierarchical morphology enabled by synergizing fullerene and non-fullerene acceptors10.1038/s41560-018-0234-9 ↗
28. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
29. Achieving over 16% efficiency for single-junction organic solar cells10.1007/s11426-019-9457-5 ↗
30. Single-junction polymer solar cells with 16.35% efficiency enabled by a platinum(II) complexation strategy10.1002/adma.201901872 ↗
31. Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages10.1038/s41467-019-10351-5 ↗
32. 16.67% rigid and 14.06% flexible organic solar cells enabled by ternary heterojunction strategy10.1002/adma.201902210 ↗
33. Eco-compatible solvent-processed organic photovoltaic cells with over 16% efficiency10.1002/adma.201903441 ↗
34. 17% efficient organic solar cells based on liquid exfoliated WS2 as a replacement for PEDOT:PSS10.1002/adma.201902965 ↗
35. 18% efficiency organic solar cells
36. High efficiency polymer solar cells with efficient hole transfer at zero highest occupied molecular orbital offset between methylated polymer donor and brominated acceptor10.1021/jacs.9b09939 ↗
37. High-efficiency organic solar cells with low non-radiative recombination loss and low energetic disorder10.1038/s41566-019-0573-5 ↗
38. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
39. Asymmetric nonfullerene small molecule acceptors for organic solar cells
40. Asymmetrical small molecule acceptor enabling nonfullerene polymer solar cell with fill factor Approaching 79%10.1021/acsenergylett.8b00825 ↗
41. Asymmetrical ladder-type donor-induced polar small molecule acceptor to promote fill factors approaching 77% for high-performance nonfullerene polymer solar cells10.1002/adma.201800052 ↗
42. Asymmetric A–D–π–A-type nonfullerene small molecule acceptors for efficient organic solar cells10.1039/C9TA06476A ↗
43. Asymmetric selenophene-based non-fullerene acceptors for high-performance organic solar cells10.1039/C8TA11197A ↗
44. Asymmetric fused-ring electron acceptor with two distinct terminal groups for efficient organic solar cells10.1039/C9TA01285K ↗
45. A nonfullerene acceptor utilizing a novel asymmetric multifused-ring core unit for highly efficient organic solar cells10.1039/C8TC01229F ↗
46. High-performance eight-membered indacenodithiophene-based asymmetric A-D-A type non-fullerene acceptors10.1002/solr.201800246 ↗
47. Multi-component non-fullerene acceptors with tunable bandgap structures for efficient organic solar cells10.1039/C8TA09830A ↗
48. A small molecular electron acceptor based on asymmetric hexacyclic core of thieno[1,2-b]indaceno[5,6-b’] thienothiophene for efficient fullerene-free polymer solar cells10.1016/j.scib.2018.05.025 ↗
49. Fluorination vs. Chlorination: a case study on high performance organic photovoltaic materials10.1007/s11426-018-9260-2 ↗
50. Design, synthesis, and photovoltaic characterization of a small molecular acceptor with an ultra-narrow band gap10.1002/anie.201610944 ↗
51. Efficient semitransparent organic solar cells with tunable color enabled by an ultralow-bandgap nonfullerene acceptor10.1002/adma.201703080 ↗
52. A large-bandgap conjugated polymer for versatile photovoltaic applications with high performance10.1002/adma.201502110 ↗
53. Ternary small molecule solar cells exhibiting power conversion efficiency of 10.3%10.1016/j.nanoen.2017.07.044 ↗
54. Non-fullerene polymer solar cells based on a selenophene-containing fused-ring acceptor with photovoltaic performance of 8.6%10.1039/C6EE00315J ↗
55. Frisch · 2016
56. Synthesis and photovoltaic properties of two-dimensional conjugated polythiophenes with Bi(thienylenevinylene) side chains10.1021/ja060141m ↗
57. 11.4% efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor10.1038/ncomms13651 ↗
58. Optimized fibril network morphology by precise side-chain engineering to achieve high-performance bulk-heterojunction organic solar cells
59. Low band gap polymer solar cells with minimal voltage losses10.1002/aenm.201600148 ↗
60. Device physics of polymer:fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗
61. Intensity dependence of current voltage characteristics and recombination in high-efficiency solution-processed small-molecule solar cells10.1021/nn401267s ↗
62. Simultaneously increasing open-circuit voltage and short-circuit current to minimize energy loss of organic solar cells via designing asymmetrical non-fullerene acceptor10.1039/C9TA02283J ↗
63. Dithieno[3,2-b:2’,3’-d]pyrrol-Fused asymmetrical electron acceptors: a study into the effects of nitrogen-functionalization on reducing nonradiative recombination loss and dipole moment on morphology10.1002/advs.201902657 ↗
64. Designing an asymmetrical isomer to promote the LUMO energy level and molecular packing of A non-fullerene acceptor for polymer solar cells with 12.6% efficiency10.1039/C8SC02018C ↗