Photophysical properties and stability of binuclear emissive Copper(I) complexes Co-deposited with CuX (X = Cl, Br, I) and aza-9,9′-spirobifluorenes
Source abstract
Abstract
Abstract Cuprous complexes are considered as promising alternatives to phosphorescent Ir complexes in the applications of electroluminescent devices in recent years. In addition, the co-deposition route is a common synthesis method using Cu(I) halide and organic materials to generate a Cu(I) complex as an emitter of organic light-emitting diodes (OLEDs). In the research presented here, we investigated the photoluminescence (PL) characteristics of Cu(I) complexes co-deposited by aza-9,9′- spirobifluorene and CuX (X = Cl, Br, I) at different doping concentrations. We found that the CuCl, CuBr, and CuI with a molar ratio respectively at 7%, 7%, and 9% exhibited higher PL quantum yields and external quantum yield, and CuBr as a doping halide showed the best performance. We then systematically investigated the complexes in response to external stimulation (water, oxygen and thermal annealing, operation voltage). The results exhibit obvious phase decomposition with increasing annealing temperature, exposure time, and applied voltage. Finally, we conclude that the co-deposited Cu(I) complexes are vulnerable to external stimulation. Based on this work, employing co-deposited Cu(I) complexes as an emitter is a suitable way to fabricate high-efficiency and stable OLED that merits further research.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Luminescence and Fluorescent Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Approaches for fabricating high efficiency organic light emitting diodes10.1039/C4TC02495H ↗
2. Functionalization of phosphorescent emitters and their host materials by main-group elements for phosphorescent organic light-emitting devices10.1039/C5CS00424A ↗
3. Recent progress in high-efficiency blue-light-emitting materials for organic light-emitting diodes10.1002/adfm.201603007 ↗
4. White organic light-emitting diodes with fluorescent tube efficiency10.1038/nature08003 ↗
5. Facile synthesis of highly efficient lepidine-based phosphorescent iridium(III) complexes for yellow and white organic light-emitting diodes10.1002/adfm.201503826 ↗
6. Metal-organic and organic TADF-materials: status, challenges and characterization10.1007/s41061-016-0022-6 ↗
7. Thermally activated delayed fluorescence emitters with a m,m-di-tert-butyl-carbazolyl benzoylpyridine core achieving extremely high blue electroluminescence efficiencies10.1039/C7TC00457E ↗
8. Manipulation of thermally activated delayed fluorescence of blue exciplex emission: fully utilizing exciton energy for highly efficient organic light emitting diodes with low roll-off10.1021/acsami.7b04987 ↗
9. Highly efficient electroluminescence from green-light-emitting electrochemical cells based on CuI complexes10.1002/adfm.200500691 ↗
10. Thermally activated delayed fluorescence materials towards the breakthrough of organoelectronics
11. White electroluminescent phosphine-chelated copper iodide nanoclusters
12. Chemical degradation in organic light-emitting devices: mechanisms and implications for the design of new materials10.1002/adma.201205022 ↗
13. Synthesis, structure, and characterization of dinuclear copper(I) halide complexes with PˆN ligands featuring exciting photoluminescence properties10.1021/ic300979c ↗
14. Blue-light emission of Cu(I) complexes and singlet harvesting10.1021/ic200811a ↗
15. Phosphorescence versus thermally activated delayed fluorescence. Controlling singlet-triplet splitting in brightly emitting and sublimable Cu(I) compounds10.1021/ja508155x ↗
16. A codeposition route to CuI-pyridine coordination complexes for organic light-emitting diodes10.1021/ja1065653 ↗
17. Copper(I) complexes for thermally activated delayed fluorescence: from photophysical to device properties
18. High efficiency organic light-emitting diodes with in situ synthesized Cu(I) complex emitter: how to do chemical reaction in a vacuum chamber?10.1016/j.orgel.2016.07.021 ↗
19. Simple and high efficiency phosphorescence organic light-emitting diodes with codeposited copper(I) emitter10.1021/cm5006086 ↗
20. Syntheses, photoluminescence, and electroluminescence of a series of iridium complexes with trifluoromethyl-substituted 2-phenylpyridine as the main ligands and tetraphenylimidodiphosphinate as the ancillary ligand10.1021/ic302510p ↗
21. Rational design of strongly blue-emitting cuprous complexes with thermally activated delayed fluorescence and application in solution-processed OLEDs10.1021/cm4024309 ↗
22. Transients of volume‐controlled current and of recombination radiation in anthracene10.1063/1.1727152 ↗
23. Luminescence ranging from red to blue: a series of copper(I)-Halide complexes having rhombic {Cu2(μ-X)2} (X = Br and I) units with N-heteroaromatic ligands10.1021/ic0510359 ↗
24. Nitrogen introduction of spirobifluorene to form α-, β-, γ-, and δ-aza-9,9′-spirobifluorenes: new bipolar system for efficient blue organic light-emitting diodes10.1016/j.dyepig.2018.03.066 ↗
25. Halogen-dependent thermochromic properties in three methyl-viologen/haloargentate charge transfer (CT) salts10.1007/s10876-016-0999-6 ↗
26. Synthesis of carboline-based host materials for forming copper(I) complexes as emitters: a promising strategy for achieving high-efficiency and low-cost phosphorescent organic light-emitting diodes10.1016/j.dyepig.2017.10.028 ↗
27. Highly efficient green organic light-emitting diodes containing luminescent three-coordinate copper(I) complexes10.1021/ja202965y ↗
28. Balanced dual emissions from tridentate phosphine-coordinate copper(I) complexes toward highly efficient yellow OLEDs10.1002/adma.201600487 ↗
29. [Cu(NˆN)(PˆP)]+ complexes with 2,2':6',2''-terpyridine ligands as the NˆN domain10.1039/C5DT00517E ↗
30. Photoactive mono- and polynuclear Cu(i)–phenanthrolines. A viable alternative to Ru(ii)–polypyridines?10.1039/b000703j ↗
31. Guo · 2017 · vol. 8 · 1259
32. High-efficiency and stable quantum dot light-emitting diodes enabled by a solution-processed metal-doped nickel oxide hole injection interfacial layer
33. Temperature- and voltage-induced ligand rearrangement of a dynamic electroluminescent metallopolymer10.1002/anie.201404186 ↗
34. Brightly blue and green emitting Cu(I) dimers for singlet harvesting in OLEDs10.1021/jp402975d ↗
35. Thermally activated delayed fluorescence of co-deposited copper(i) complexes: cost-effective emitters for highly efficient organic light-emitting diodes10.1039/C7TC01531C ↗
36. Synthesis, crystal structure and photo- and electro-luminescence of the coumarin derivatives with benzotriazole moiety10.1016/j.orgel.2009.09.023 ↗
37. Photo- and electro-luminescence of three TADF binuclear Cu(i) complexes with functional tetraimine ligands10.1039/C7TC00443E ↗
38. Degradation mechanisms and reactions in organic light-emitting devices10.1021/cr400704v ↗
39. Dinuclear Cu(I) complex with combined bright TADF and phosphorescence. Zero-field splitting and Spin−Lattice relaxation effects of the triplet state10.1021/acs.jpclett.8b00957 ↗
40. Luminescent dinuclear copper(I) complexes as potential thermally activated delayed fluorescence (TADF) emitters: a theoretical study
41. Light-emitting electrochemical cells: recent progress and future prospects10.1016/j.mattod.2014.04.029 ↗
42. Origin of a counterintuitive yellow light-emitting electrochemical cell based on a blue-emitting heteroleptic copper(i) complex10.1039/C6DT00970K ↗
43. Luminescent ionic transition-metal complexes for light-emitting electrochemical cells10.1002/anie.201201471 ↗
44. Synthesis, crystal structure, and properties of a dinuclear Cu(I) cluster10.1080/10426507.2013.765875 ↗