journal article·2019-01

Synthesis and characterization of the fluorinated thieno[3,4-c]pyrrole-4,6-dione-based donor-acceptor polymers for organic solar cells

Jiyoung Kim, Woo-Hyung Lee, Jong Baek Park, Do-Hoon Hwang, In-Nam Kang

Dyes and Pigments· Volume 160
Publisher page

Abstract

Abstract A new wide bandgap polymer (PC8TPD-F) has been synthesized via the Stille cross-coupling reaction between fluorine-substituted thieno[3,4-c]pyrrole-4,6-dione (TPD) and 4,8-bis(5-hexylthiophen-2-yl)benzo[1,2-b:4,5-b]dithiophene (BDTT). For structural comparison, the nonfluorinated TPD-based BDTT polymer (PC8TPD) was also synthesized with the same polymerization. The number average molecular weights (Mn) of PC8TPD and PC8TPD-F were found to be 47,000 g/mol (Đ = 2.1) and 52,000 g/mol (Đ = 1.8) respectively. The HOMO levels of PC8TPD and PC8TPD-F were determined to be −5.56 and–5.65 eV respectively. The inclusion of the fluorinated TPD unit lowers the polymer's HOMO level. The SCLC mobilities of PC8TPD and PC8TPD-F were determined to be 1.5 × 10−4 and 2.1 × 10−4 cm2/V respectively. Polymer solar cell devices prepared with PC8TPD and PC8TPD-F as their active layers were found to exhibit power conversion efficiencies of 4.26% and 6.80% with open circuit voltages of 0.90 V and 0.95 V respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Roll-to-Roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
2. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
3. Molecular engineering of conjugated polymers for solar cells: an updated report10.1002/adma.201601391 ↗
4. Synthesis and characterization of a soluble a–d–a molecule containing a 2D conjugated selenophene-based side group for organic solar cells10.1002/marc.201700016 ↗
5. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
6. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
7. Fluorine substituted conjugated polymer of medium band gap yields 7% efficiency in Polymer−Fullerene solar cells10.1021/ja1112595 ↗
8. Prominent short-circuit currents of fluorinated quinoxaline-based copolymer solar cells with a power conversion efficiency of 8.0%10.1021/cm302861s ↗
9. Side‐chain fluorination: an effective approach to achieving high‐performance all‐polymer solar cells with efficiency exceeding 7%10.1002/adma.201602298 ↗
10. Implication of fluorine atom on electronic properties, ordering structures, and photovoltaic performance in naphthobisthiadiazole-based semiconducting polymers10.1021/jacs.6b05418 ↗
11. Understanding low bandgap polymer PTB7 and optimizing polymer solar cells based on it10.1002/adma.201400384 ↗
12. Fluorine substituents reduce charge recombination and drive structure and morphology development in polymer solar cells10.1021/ja309289u ↗
13. High performance fluorine-containing BDT-based copolymer for organic solar cells with a high open circuit voltage10.1002/pola.28643 ↗
14. A thieno[3,4-c]pyrrole-4,6-dione-based copolymer for efficient solar cells10.1021/ja101888b ↗
15. A new terthiophene-thienopyrrolodione copolymer‐based bulk heterojunction solar cell with high open-circuit voltage10.1002/aenm.201200350 ↗
16. Ordering effects in Benzo[1,2‐b:4,5‐b′]difuran‐thieno[3,4‐c]pyrrole‐4,6‐dione polymers with >7% solar cell efficiency10.1002/adma.201305344 ↗
17. Influence of backbone fluorination in regioregular poly(3-alkyl-4-fluoro)thiophenes10.1021/jacs.5b02785 ↗
18. Conjugated and nonconjugated substitution effect on photovoltaic properties of benzodifuran-based photovoltaic polymers10.1021/ma301254x ↗
19. Naphtho[1,2-b:5,6-b′]dithiophene based two-dimensional conjugated polymers for highly efficient thick-film inverted polymer solar cells10.1021/cm5033223 ↗
20. Inverted polymer solar cells integrated with a low‐temperature‐annealed sol‐gel‐derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
21. Characterizing materials with cyclic voltammetry10.1002/adma.19940061204 ↗
22. Effects of solubilizing group modification in fullerene bis-adducts on normal and inverted type polymer solar cells10.1021/cm3010369 ↗
23. Exciton diffusion and dissociation in a poly(p‐phenylenevinylene)/C60 heterojunction photovoltaic cell10.1063/1.115797 ↗