3D printing of mechanically functional meniscal tissue equivalents using high concentration extracellular matrix inks
Source abstract
Abstract
Decellularized extracellular matrix (dECM) has emerged as a promising biomaterial in the fields of tissue engineering and regenerative medicine due to its ability to provide specific biochemical and biophysical cues supportive of the regeneration of diverse tissue types. Such biomaterials have also been used to produce tissue-specific inks and bioinks for 3D printing applications. However, a major limitation associated with the use of such dECM materials is their poor mechanical properties, which limits their use in load-bearing applications such as meniscus regeneration. In this study, native porcine menisci were solubilized and decellularized using different methods to produce highly concentrated dECM inks of differing biochemical content and printability. All dECM inks displayed shear thinning and thixotropic properties, with increased viscosity and improved printability observed at higher pH levels, enabling the 3D printing of anatomically defined meniscal implants. With additional crosslinking of the dECM inks following thermal gelation at pH 11, it was possible to fabricate highly elastic meniscal tissue equivalents with compressive mechanical properties similar to the native tissue. These improved mechanical properties at higher pH correlated with the development of a denser network of smaller diameter collagen fibers. These constructs also displayed repeatable loading and unloading curves when subjected to long-term cyclic compression tests. Moreover, the printing of dECM inks at the appropriate pH promoted a preferential alignment of the collagen fibers. Altogether, these findings demonstrate the potential of 3D printing of highly concentrated meniscus dECM inks to produce mechanically functional and biocompatible implants for meniscal tissue regeneration. This approach could be applied to a wide variety of different biological tissues, enabling the 3D printing of tissue mimics with diverse applications from tissue engineering to surgical planning.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tissue Engineering and Regenerative Medicine · Electrospun Nanofibers in Biomedical Applications · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Epidemiology of Athletic Knee Injuries: A 10-year Study10.1016/j.knee.2006.01.005 ↗
2. A systematic review of clinical outcomes in patients undergoing meniscectomy10.1177/0363546510370196 ↗
3. The role of meniscal tissue in joint protection in early osteoarthritis10.1007/s00167-016-4069-2 ↗
4. Microvasculature of the human meniscus10.1177/036354658201000205 ↗
5. A meta-analysis comparing meniscal repair with meniscectomy in the treatment of meniscal tears: the more meniscus, the better outcome?10.1007/s00167-013-2528-6 ↗
6. Biological augmentation and tissue engineering approaches in meniscus surgery10.1016/j.arthro.2014.11.044 ↗
7. An anatomical study of meniscal allograft sizing10.1007/s00167-003-0366-7 ↗
8. Meniscal allograft transplantation: a meta-analysis10.1051/sicotj/2017016 ↗
9. Outcome after partial medial meniscus substitution with the collagen meniscal implant at a minimum of 10 years' follow-up10.1016/j.arthro.2011.02.018 ↗
10. Clinical application of scaffolds for partial meniscus replacement10.1097/JSA.0000000000000072 ↗
11. The meniscus in normal and osteoarthritic tissues: facing the structure property challenges and current treatment trends10.1146/annurev-bioeng-060418-052547 ↗
12. Protein-releasing polymeric scaffolds induce fibrochondrocytic differentiation of endogenous cells for knee meniscus regeneration in sheep10.1126/scitranslmed.3009696 ↗
13. A 3D printed PCL/hydrogel construct with zone-specific biochemical composition mimicking that of the meniscus10.1088/1758-5090/aaf707 ↗
14. Cengiz · 2020
15. Bandyopadhyay · 2020
16. Bahcecioglu · 2019
17. Generating ready-to-implant anisotropic menisci by 3D-bioprinting protein-releasing cell-laden hydrogel-polymer composite scaffold
18. Orchestrated biomechanical, structural, and biochemical stimuli for engineering anisotropic meniscus10.1126/scitranslmed.aao0750 ↗
19. Meniscus ECM-functionalised hydrogels containing infrapatellar fat pad-derived stem cells for bioprinting of regionally defined meniscal tissue
20. Long-term evaluation of meniscal tissue formation in 3-dimensional–Printed scaffolds with sequential release of connective tissue growth factor and TGF-β3 in an ovine model10.1177/0363546519865513 ↗
21. Reinforcing interpenetrating network hydrogels with 3D printed polymer networks to engineer cartilage mimetic composites10.1088/1758-5090/ab8708 ↗
22. Integrating finite element modelling and 3D printing to engineer biomimetic polymeric scaffolds for tissue engineering10.1080/03008207.2019.1656720 ↗
23. Szojka · 2017
24. The return of a forgotten polymer - polycaprolactone in the 21st century10.1016/j.progpolymsci.2010.04.002 ↗
25. PCL-MECM-Based hydrogel hybrid scaffolds and meniscal fibrochondrocytes promote whole meniscus regeneration in a rabbit meniscectomy model10.1021/acsami.9b13611 ↗
26. Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink10.1038/ncomms4935 ↗
27. Cunniffe · 2019
28. Extracellular matrix as an inductive scaffold for functional tissue reconstruction10.1016/j.trsl.2013.11.003 ↗
29. Gilbert · 2006 · 83
30. Makris · 2011
31. Chae · 2021
32. Meniscus-derived matrix bioscaffolds: effects of concentration and cross-linking on meniscus cellular responses and tissue repair
33. Schwarz · 2012
34. Anatomical region-dependent enhancement of 3-dimensional chondrogenic differentiation of human mesenchymal stem cells by soluble meniscus extracellular matrix10.1016/j.actbio.2016.11.046 ↗
35. Nulty · 2021
36. 3D bioprinting spatiotemporally defined patterns of growth factors to tightly control tissue regeneration10.1126/sciadv.abb5093 ↗
37. Kim · 2017
38. Extracellular matrix hydrogels from decellularized tissues: structure and function10.1016/j.actbio.2016.11.068 ↗
39. Comparison of decellularization protocols for preparing a decellularized porcine annulus fibrosus scaffold
40. Glyoxal cross-linking of solubilized extracellular matrix to produce highly porous, elastic, and chondro-permissive scaffolds for orthopedic tissue engineering10.1002/jbm.a.36731 ↗
41. Determination of hydroxyproline in tissues and the evaluation of the collagen content of the tissues10.1134/S106193480701011X ↗
42. Olvera · 2015 · vol. 1340 · 279
43. Affinity-bound growth factor within sulfated interpenetrate network bioinks for bioprinting cartilaginous tissues
44. The impact of decellularization methods on extracellular matrix derived hydrogels
45. pH effects on collagen fibrillogenesis in vitro: electrostatic interactions and phosphate binding10.1016/j.msec.2009.01.001 ↗
46. The meniscus in normal and osteoarthritic tissues: facing the structure property challenges and current treatment trends10.1146/annurev-bioeng-060418-052547 ↗
47. Current concepts in meniscus tissue engineering and repair10.1002/adhm.201701407 ↗
48. Surgical and tissue engineering strategies for articular cartilage and meniscus repair10.1038/s41584-019-0255-1 ↗
49. Mahon · 2020
50. Zhao · 2020
51. Crapo · 2011 · vol. 32 · 3233
52. Electrostatic and non-electrostatic contributions of proteoglycans to the compressive equilibrium modulus of bovine articular cartilage10.1016/j.jbiomech.2010.01.021 ↗
53. Kelly · 2020
54. Chae · 2021
55. Designing decellularized extracellular matrix-based bioinks for 3D bioprinting10.1002/adhm.202000734 ↗
56. Achilli · 2010 · vol. 2 · 664
57. Crosslinking and mechanical properties significantly influence cell attachment, proliferation, and migration within collagen glycosaminoglycan scaffolds10.1089/ten.tea.2010.0590 ↗
58. Image correlation spectroscopy of multiphoton images correlates with collagen mechanical properties10.1529/biophysj.107.120006 ↗
59. Rosenblatt · 1994
60. Tensile and compressive properties of the medial rabbit meniscus10.1243/095441105X34329 ↗
61. Comparison of the biomechanical tensile and compressive properties of decellularised and natural porcine meniscus10.1016/j.jbiomech.2015.02.044 ↗
62. Characterization of site-specific biomechanical properties of human meniscus-Importance of collagen and fluid on mechanical nonlinearities10.1016/j.jbiomech.2015.01.048 ↗
63. Regional and fiber orientation dependent shear properties and anisotropy of bovine meniscus10.1016/j.jmbbm.2011.06.022 ↗
64. Chen · 2017 · vol. 370 · 41
65. Preparation and characterization of an optimized meniscal extracellular matrix scaffold for meniscus transplantation10.3389/fbioe.2020.00779 ↗
66. Engineering self-assembled neomenisci through combination of matrix augmentation and directional remodeling10.1016/j.actbio.2020.04.019 ↗
67. Topologically micropatterned collagen and poly(ε-caprolactone) struts fabricated using the poly(vinyl alcohol) fibrillation/leaching process to develop efficiently engineered skeletal muscle tissue10.1021/acsami.7b14192 ↗