Shape-defined solid micro-objects from poly(d,l-lactic acid) as cell-supportive counterparts in bottom-up tissue engineering
Source abstract
Abstract
In bottom-up tissue engineering, small modular units of cells and biomaterials are assembled toward larger and more complex ones. In conjunction with a new implementation of this approach, a novel method to fabricate microscale objects from biopolymers by thermal imprinting on water-soluble sacrificial layers is presented. By this means, geometrically well-defined objects could be obtained without involving toxic agents in the form of photoinitiators. The micro-objects were used as cell-adhesive substrates and cell spacers in engineered tissues created by cell-guided assembly of the objects. Such constructs can be applied both for in vitro studies and clinical treatments. Clinically relevantly sized aggregates comprised of cells and micro-objects retained their viability up to 2 weeks of culture. The aggregation behavior of cells and objects showed to depend on the type and number of cells applied. To demonstrate the micro-objects’ potential for engineering vascularized tissues, small aggregates of human bone marrow stromal cells (hMSCs) and micro-objects were coated with a layer of human umbilical vein endothelial cells (HUVECs) and fused into larger tissue constructs, resulting in HUVEC-rich regions at the aggregates' interfaces. This three-dimensional network-type spatial cellular organization could foster the establishment of (premature) vascular structures as a vital prerequisite of, for example, bottom-up-engineered bone-like tissue.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: 3D Printing in Biomedical Research · Bone Tissue Engineering Materials · Cellular Mechanics and Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Tissue engineering10.1126/science.8493529 ↗
2. Tissue engineering: organs from the lab10.1038/522373a ↗
3. Chapter 1 – Tissue engineering: an introduction
4. Modular tissue engineering: engineering biological tissues from the bottom up10.1039/b814285h ↗
5. Bottom-up tissue engineering10.1016/j.copbio.2011.04.001 ↗
6. Multiscale assembly for tissue engineering and regenerative medicine10.1016/j.tibtech.2015.02.003 ↗
7. Distribution and viability of fetal and adult human bone marrow stromal cells in a biaxial rotating vessel bioreactor after seeding on polymeric 3D additive manufactured scaffolds10.3389/fbioe.2015.00169 ↗
8. Cell encapsulation in sub-mm sized gel modules using replica molding10.1371/journal.pone.0002258 ↗
9. Vascularization in engineered tissue construct by assembly of cellular patterned micromodules and degradable microspheres10.1021/acsami.6b15697 ↗
10. Biofabrication: reappraising the definition of an evolving field10.1088/1758-5090/8/1/013001 ↗
11. Microengineered hydrogels for tissue engineering10.1016/j.biomaterials.2007.07.021 ↗
12. Hydrogels for tissue engineering and regenerative medicine10.1039/C4TB00775A ↗
13. Accelerated wound healing by injectable microporous gel scaffolds assembled from annealed building blocks10.1038/nmat4294 ↗
14. Engineered micro-objects as scaffolding elements in cellular building blocks for bottom-up tissue engineering approaches10.1002/adma.201304539 ↗
15. Cell proliferation assays on plasma activated SU-810.1016/j.mee.2008.01.026 ↗
16. Polymers for neural implants10.1002/polb.22169 ↗
17. Hybrid hydroxyapatite nanoparticle colloidal gels are injectable fillers for bone tissue engineering10.1089/ten.tea.2013.0075 ↗
18. Micro hot embossing of thermoplastic polymers: a review10.1088/0960-1317/24/1/013001 ↗
19. Nanoimprint lithography: methods and material requirements10.1002/adma.200600882 ↗
20. Imprint lithography with 25-nanometer resolution10.1126/science.272.5258.85 ↗
21. In vivo evaluation of a porous hydroxyapatite/poly-DL-lactide composite for bone tissue engineering10.1002/jbm.a.31109 ↗
22. Development of a solvent-free polylactide/calcium carbonate composite for selective laser sintering of bone tissue engineering scaffolds10.1016/j.msec.2019.03.101 ↗
23. An algorithm-based topographical biomaterials library to instruct cell fate10.1073/pnas.1109861108 ↗
24. The control of human mesenchymal cell differentiation using nanoscale symmetry and disorder10.1038/nmat2013 ↗
25. Cell shape, cytoskeletal tension, and RhoA regulate stem cell lineage commitment10.1016/S1534-5807(04)00075-9 ↗
26. Directed assembly and development of material-free tissues with complex architectures10.1002/adma.201505723 ↗
27. Tissue deformation spatially modulates VEGF signaling and angiogenesis10.1073/pnas.1201626109 ↗
28. A modular strategy to engineer complex tissues and organs10.1002/advs.201700402 ↗
29. Bone induction by implants coated with cultured osteogenic bone marrow cells10.1177/08959374990130011801 ↗
30. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗
31. Toward residual-layer-free nanoimprint lithography in large-area fabrication10.1007/s13367-014-0005-5 ↗
32. Residual-layer-free printing by selective filling of self-assembled monolayer-treated mold
33. Selective-filling mold for residual-layer-free patterning of 3D microstructures10.1080/10426914.2012.709342 ↗
34. Residual-layer-free direct printing by selective filling of a mould10.1088/0960-1317/21/2/025026 ↗
35. Hot embossing of discrete microparts10.1002/pen.21422 ↗
36. Hot embossing and mechanical punching of biodegradable microcontainers for oral drug delivery10.1016/j.mee.2014.11.009 ↗
37. Micropatterned hot-embossed polymeric surfaces influence cell proliferation and alignment10.1002/jbm.a.31915 ↗
38. High-definition micropatterning method for hard, stiff and brittle polymers10.1016/j.msec.2016.11.004 ↗
39. Fabrication of cell container arrays with overlaid surface topographies10.1007/s10544-011-9588-5 ↗
40. Hydrophobic nanopillars initiate mesenchymal stem cell aggregation and osteo-differentiation10.1016/j.actbio.2010.09.022 ↗
41. Cytoskeletal role in differential adhesion patterns of normal fibroblasts and breast cancer cells inside silicon microenvironments10.1007/s10544-008-9268-2 ↗
42. Two-photon polymerization for biological applications10.1016/j.mattod.2017.06.004 ↗
43. Compaction, fusion, and functional activation of three-dimensional human mesenchymal stem cell aggregate10.1089/ten.tea.2014.0314 ↗
44. Optimization of the formation of embedded multicellular spheroids of MCF-7 cells: how to reliably produce a biomimetic 3D model10.1016/j.ab.2016.10.004 ↗
45. Self-assembly and tissue fusion of toroid-shaped minimal building units10.1089/ten.tea.2009.0607 ↗
46. Chronic nerve compression induces concurrent apoptosis and proliferation of Schwann cells10.1002/cne.10692 ↗
47. Molecular mechanism of apoptosis induced by mechanical forces10.1016/S0074-7696(05)45003-2 ↗
48. Mechanical stress-induced apoptosis of endplate chondrocytes in organ-cultured mouse intervertebral discs: an ex vivo study10.1097/01.BRS.0000076915.55939.E3 ↗
49. Vascularized organoid engineered by modular assembly enables blood perfusion10.1073/pnas.0602740103 ↗
50. Modular tissue engineering: fabrication of a gelatin-based construct10.1002/term.14 ↗
51. Controlling spatial organization of multiple cell types in defined 3D geometries10.1002/adma.201201805 ↗
52. Nanocomposite hydrogels and their applications in drug delivery and tissue engineering10.1166/jbn.2015.1962 ↗