journal article·2025-08Open access

Biomimetic UV photo-protection of skin surface by structured epicuticular wax films

Anuja Das, Luca Polacchi, Jean-Yves Fouron, Antoine Montaux-Lambert, Laurent Billon, Gustavo S. Luengo

Abstract

: The realms of biomimicry encourage us to explore and replicate the remarkable functionalities found in the big variety of living organisms such as plants, birds, animals etc. Inspired by the ultraviolet (UV) reflective characteristics of self-assembled epicuticular wax of plant leaves, in this article, we present a biomimetic plant-inspired approach to pattern the surface of skin with wax coatings and enhance its UV resistance. Through a physico-chemical approach, we coat chemically homogenous (as well as heterogenous) chemical composition of waxes from its solution on quartz substrate. By controlling the self-assembly conditions, diverse surface morphologies are obtained with Euphorbia cerifera (commonly known as Candelilla , chemically heterogenous wax) and Myristyl Palmitate (present in Phytolacca Acinosa , chemically homogenous alkyl esters wax). Optical measurements show increased reflectance in visible spectra for Candelilla wax coatings exhibiting globules, plate-like crystalline structures at the surface which contributes to higher roughness parameters. With homogenous wax, maximum reflectance is obtained for dual scale morphology which includes self- assembled 3D plate-like structures at an optimum length-scale. Our experiments reveal that the combined effect of vertically and horizontally placed stacks of crystal plates at sub-micron scale induces maximum scattering effect. This geometrical organisation effectively decreases transmission of incident radiations to the underlying surface leading to enhanced photo-protection. Further, to showcase the feasibility of such approach for potential cosmetic applications, we replicate best performing structures on a commonly used model skin surface for UV absorption evaluation, (polymethyl methacrylate plates) and on real ex-vivo Stratum Corneum , the outermost layer of skin. For realistic substrates, scattering effect is dependent on nature of intrinsic substrate patterns and roughness in which case the feature height ( h F ) of 3D structures should be greater than substrate patterns to achieve maximum reflectance. This study highlights the formation of physical structuration with biomaterials and presents insights on scattering induced by such plant-based structures with potential for dermatological or cosmetic applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Photonic Crystals and Applications · Biocrusts and Microbial Ecology · Surface Modification and Superhydrophobicity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Physiological responses of onion plants to UV irradiation at 0°C10.1016/S0033-7560(74)90108-2 ↗
2. Composition of plant cuticular waxes
3. The fine structure of the plant Cuticle
4. Environmental physiology of Sorghum. II. Epicuticular wax Load and cuticular transpiration10.2135/cropsci1984.0011183X002400060038x ↗
5. Optical properties of plant surfaces
6. Bioinspired ultraviolet reflective photonic structures derived from butterfly wings (Euploea)10.1063/1.3653260 ↗
7. Spatially modulated structural colour in bird feathers10.1038/srep18317 ↗
8. Evolution of brilliant iridescent feather nanostructures10.7554/eLife.71179 ↗
9. Micro-, nano- and hierarchical structures for superhydrophobicity, self-cleaning and low adhesion10.1098/rsta.2009.0014 ↗
10. Fabrication of artificial Lotus leaves and significance of hierarchical structure for superhydrophobicity and low adhesion10.1039/b818940d ↗
11. Effects of pubescence and waxes on the reflectance of leaves in the ultraviolet and photosynthetic wavebands: a comparison of a range of species10.1046/j.1365-3040.2002.00779.x ↗
12. Ultraviolet leaf reflectance of common urban trees and the prediction of reflectance from leaf surface characteristics10.1016/j.agrformet.2003.08.025 ↗
13. The hydrophobic coatings of plant surfaces: epicuticular wax crystals and their morphologies, crystallinity and molecular self-assembly10.1016/j.micron.2007.11.010 ↗
14. Self-assembled, disordered structural color from fruit wax bloom10.1126/sciadv.adk4219 ↗
15. Tuneable topography and hydrophobicity mode in biomimetic plant-based wax coatings10.1002/adfm.202307977 ↗
16. Solar UV radiation reduces the barrier function of human skin10.1073/pnas.1206851109 ↗
17. Screening sunscreens: protecting the biomechanical barrier function of skin from solar ultraviolet radiation damage10.1111/ics.12370 ↗
19. Titanium dioxide and zinc oxide nanoparticles in sunscreens: focus on their safety and effectiveness10.2147/NSA.S19419 ↗
20. Mycosporine-like Amino acids (MAAs): biology, chemistry and identification features10.3390/ph14010063 ↗
21. Photoprotective properties of Isothiocyanate and Nitrile Glucosinolate derivatives from Meadowfoam (Limnanthes alba) against UVB irradiation in human skin Equivalent10.3389/fphar.2018.00477 ↗
22. Self-assembly patterning of Silica colloidal crystals10.1021/la050075m ↗
23. Template-assisted self-assembly: a versatile approach to complex micro- and nanostructures10.1039/B811021B ↗
24. Patterned close-packed Nanoparticle arrays with controllable dimensions and precise Locations10.1002/smll.201102038 ↗
25. Colloidal transfer printing–mediated fabrication of zinc oxide Nanorods for self-cleaning applications10.1002/admi.201900063 ↗
26. Ordered non-close packed colloidal array with morphology control10.1039/D3SM00251A ↗
27. Patterning of a colloidal crystal film on a modified hydrophilic and hydrophobic surface10.1002/1521-3773(20020617)41:12<2067::AID-ANIE2067>3.0.CO;2-Z ↗
28. Inkjet printing patterned photonic crystal domes for wide viewing-angle displays by controlling the sliding three phase contact line10.1002/adom.201300369 ↗
29. Printing patterned fine 3D structures by manipulating the three phase contact line10.1002/adfm.201404559 ↗
30. Structural color patterns on paper fabricated by inkjet printer and their application in anticounterfeiting10.1021/acs.jpclett.7b01372 ↗
31. Direct water-writing/electroerasing pattern on PEDOT inverse opals10.1002/adfm.201808473 ↗
32. Air-curable, high-resolution patternable oxetane-based liquid crystalline photonic films via flexographic printing10.1021/acsami.8b21464 ↗
33. Multiple structural coloring of silk-fibroin photonic crystals and humidity-responsive color sensing10.1002/adfm.201203672 ↗
34. Single-material solvent-sensitive actuator from poly(ionic liquid) inverse opals based on gradient dewetting10.1039/C6CC01442A ↗
35. Chromogenic photonic crystal sensors enabled by multistimuli-responsive shape memory polymers10.1002/smll.201703515 ↗
36. Chromogenic photonic crystals enabled by novel vapor-responsive shape-memory polymers10.1002/adma.201500835 ↗
37. Photonic shape memory polymer with stable multiple colors10.1021/acsami.7b10198 ↗
38. Iridescence-controlled and flexibly tunable retroreflective structural color film for smart displays
39. Rewritable and highly stable photonic patterns for optical storage and display enabled by direct-pressure-programmed shape memory photonic crystals10.1039/C8TC01787E ↗
40. Friction and wear of human hair fibres
41. Sensory neuron activation from topical treatments modulates the sensorial perception of human skin10.1093/pnasnexus/pgad292 ↗
42. Effects of imprinted 3D surface patterning on localized changes in the tribology of human Stratum Corneum10.1021/acs.langmuir.9b01974 ↗
43. Bioinspired self-assembled 3D patterned polymer textures as skin coatings models: tribology and tactile behavior10.1016/j.biotri.2020.100151 ↗
44. Evaporative drying induced self-assembly of epicuticular wax: a biomimetic approach in tuning surface roughness10.1021/acs.langmuir.4c00205 ↗
45. Substitution of synthetic waxes by plant-based waxes in lipsticks10.1051/ocl/2022010 ↗
46. World Medical Association Declaration of Helsinki: ethical principles for medical research involving human subjects10.1001/jama.2013.281053 ↗
47. Triterpenoids from Phytolacca acinosa10.1007/s10600-019-02670-2 ↗
48. UV protective coatings: a botanical approach10.1016/j.porgcoat.2006.08.023 ↗
49. Molecular basis of wax-based color change and UV reflection in dragonflies10.7554/eLife.43045 ↗
50. Designing angle-independent structural colors using Monte Carlo simulations of multiple scattering10.1073/pnas.2015551118 ↗
51. Surface structures of cosmetic standard poly methyl methacrylate UV evaluation plates and their influence on the in vitro evaluation of UV protection abilities of cosmetic sunscreens10.5650/jos.ess18207 ↗
52. Study of the optical properties of poly (methyl methacrylate) (PMMA) by using spin coating method10.1016/j.matpr.2021.12.213 ↗
53. The contact angle of water on viable human skin10.1016/0021-9797(68)90306-8 ↗